WELCOME AND DAY TO DAY MAINTENANCE SERVICES TO OFFICERS ACCN IN RAJOURI LINES AND REPAIRS TO FENCING, PATH, HARD STANDING, CULVERT AND DRAINS ETC IN ZONE A AT DAMANA UNDER GE JAMMU

Amount

Material and Labour for preparation of old plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greasy spots etc and applying one coat of white wash on walls complete all as specified and as directed.

Material and Labour for preparation of old plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greasy spots etc and applying two coats of white wash on walls complete all as specified and as directed.

Material and Labour for preparation of old plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greasy spots etc and applying one coat of white wash on ceiling complete all as specified and as directed.

Material and Labour for preparation of old plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greasy spots etc and applying one coat of oil bound distemper as on ceiling complete all as specified and as directed.

Material and Labour for preparation of old plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greasy spots etc and applying one coat of oil bound distemper on wall complete all as specified and as directed.

Material and Labour for preparation of old plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greasy spots etc and applying two coats of oil bound distemper over a coat of wall care putty as on wall complete all as specified and as directed.

Material and Labour for preparation of old steel surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and Labour for preparation of old wooden surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and Labour for preparation of old plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greasy spots etc and applying two coats of plastic emulsion paint over a coat of wall care putty as on wall complete all as specified and as directed.

Material and Labour for rendering 15mm thick in CM (1:4) on other than fair faces of brick surface finished even and smooth without using extra cement etc. complete all as specified and as directed. (including all necessary scaffolding, lifting arrangement for external surfaces).

Material and Labour for rendering 10 mm thick in CM (1:6) on fair faces of brick surface finished even and smooth without using extra cement upto height of four storey building complete all as specified and as directed.

Material and Labour for rendering 5 mm thick in CM (1:3) on fair faces of concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including racking out joints, hacking for key, scrubbing down with water and removing unserviceable material outside cantt area complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.

Material and Labour for applying two coats of cement based paint including preparation of newly plastered surfaces complete all as specified and as directed.

Material and Labour for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of wall care putty as on wall complete all as specified and as directed.

Taking down and refixing of shutters in same opening of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.

Dismantling floors, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceble tiles to store and rubbish off the premises complete all as specified and as directed.

Material and Labour for glazed ceramic coloured tiles, (Premier quality), of size 450 x 350 x 7 mm thick on vertical surfaces such as skirting, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces including 10mm thick rendering in CM (1:4) complete all as specified and as directed. Note: - Design, shape and pattern of fixing of tiles shall be as directed by Engineer-in-Charge.

Material and Labour for colored non-skid ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in colored cement to match shade, pattern, laying etc of tiles, over and including 15 mm thick screed bed or bedding layers of cement mortar (1:6) complete all as specified and as directed at site.

Material and Labour for vitrified ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles not exceeding 0.36 Sqm in floors etc, set and jointed in neat cement slurry over 15mm thick screed bed in cement mortar (1:6) and pointed in white or coloured cement to match complete all as specified and as directed.

Material and Labour for vitrified ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles not exceeding 0.36 Sqm on skirting, dado, set and jointed in neat cement slurry and pointed in white cement with pigment to match the surface over 10mm thick screed in CM (1:6) complete all as specified and as directed.

Material and Labour for granite 20mm thick (Pure black) (tabled, rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in colour cement (1:2) using marble dust with admixture of pigment to match with the shade of granite over and including 15mm thick screed bed in CM (1:4) edges of slab to be rounded from all sides (including cutting, wastage and polishing) complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing unserviceable material outside cantt area complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for PCC (1:2:4) type B-0 (using 12.5mm thick crushed stone aggregate) mixed with liquid water proofing compound and laid on RCC sunken slab as base layer for receiving top layer all as specified and as directed by Engineer-in-Charge.

Supply only liquid water proofing compound complete all as specified and as directed.

Material and labour for preparation of surface, the surface must be sound and free from dirt, dust and loose particles thoroughly wire brush the surface and clean the dust, wash the surface with water. Any damaged surface must be repaired by using polymer modified repair mortar with Dr. Fixit Pidicrete URP. Clean the surface, saturated with water and remove the excess water if any and bring to touch dry state. Applying the first coat of mixed @ 0.75 Sqm / Kg, 1mm thick for 2 coats) Dr Fixit Pidifin 2K on the prepared surface and allow to dry for 4 to 6 hours. Prepare another batch of Dr Fixit Pidifin 2K and apply 2nd coat in direction 90 degree to first coat. Overlay protected screed, using cement sand (1:3) along with Dr. Fixit LW+ complete all as specified and as directed.

Supply and fixing in repair 110 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall complete all as specified and as directed.

Supply and fixing in repair 75 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall complete all as specified and as directed.

Supply and fixing in repairs vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts, flush pipe and joints complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair vitreous china wash hand basin white flat back end of size 550 x 400mm including brackets, cutting for and pinning in ends for brackets, erecting stand complete including brass CP waste coupling and PVC 32mm bore waste pipe with chain and plug and porcelain stopper complete all as specified and directed.

Supply and fixing in repair sink with drainage board made of stainless steel 1mm thick kitchen with plugs, washers or waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 100mm including waste pipe etc complete all as specified and as directed.

Supply and fixing in repair stainless steel plate rack made out of 1mm thick sheet of size 750 x 600 x 250mm of size having partition as per sample kept in AGE B/R office and fixed with steel fasteners or steel screwed complete all as specified and as directed.

Supply and fixing in repair toilet paper holder box type complete all as specified and as directed.

Dismantling plain or corrugated AC sheet in roof covering complete all as specified and as directed.

Supply and fixing 6mm thick asbestos cement corrugated or semi-corrugated sheets fixed with ‘J’ type or ‘L’ type cranked hook bolts with bitumen washer complete all as specified and directed.

Description all as per Ser Item No 36.00 here-in-before but except sheets complete all as specified and as directed.

Supply and fixing 6mm thick asbestos cement one piece plan angular ridge fixed with 'L' or 'J' type or cranked hook bolts complete all as specified and as directed.

Description all as per Ser Item No 38.00 here-in-before but except ridge complete all as specified and as directed.

Dismantling boarding any description fixed in any position with nail complete all as specified and as directed.

Supply and fixing 4mm thick of size 605 X 605 mm, white pre-premiered, self embossed, reinforced designer board for false ceiling conforming to IS-14862 and ISO-8336:1993 as per specification under mentioned: - (i) GI section frame work (POWDER COATED) for white, pre-premiered, self embossed, reinforced designer board consisting of perimeter wall angle 19mm X 19mm X 0.45mm, cross 'Tee' 28.6mm (web) X 24mm flange. 33mm thick powdered coated main tee 38 (Web) X 24mm flange 0.33mm thick. Wall angle screwed fixed to brick wall / partition wall / concrete / RCC with the help of nylon sleeves and screws @ 610 mm centre to centre, then suspending GI main 'Tee' in both directions by means of hangers with alignment @ 1220mm centre to centre to soffits. To from grid of 610 X 610mm cross Tee shall be provided @ 610mm centre to centre in both directions. Suitable provisions shall be made for fixing the recessed / surface mounting light fittings if any, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing PVC cupboard shutter 24mm thick decorative pre-laminated complete water proof, termite proof and fire proof complete all as specified and as directed.

Supply and fixing prelaminated PVC plain board 24mm thick as in kitchen / cupboard shelves complete all as specified and as directed.

Supply and fixing 15mm bore tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

Description same as per Ser Item No 44.00 here-in-before but except tubing complete all as specified and as directed.

Taking up or down steel tubing 15mm bore and connection, including cleaning for refixing or removal of unserviceable pipe to store complete all as specified and as directed.

Supply and fixing in repair chromium plated doom 125mm dia with waste hole (minimum weight 40 grams) complete all as specified and as directed.

Supply and fixing in repair hand shower (health faucet) (ABS body) with 1 metre long PVC tube and wall hook fixed to wall with and including chromium plated brass screws etc complete all as specified and as directed.

Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Dismantling PVC water tank of capacity upto 1000 litres and removing from site complete all as specified and as directed.

Supply and fixing rotational moulded polyethylene water storage tank including plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 1000 litres including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic balls screwed for iron pipe and fixed (minimum weight 210 gram) complete all as specified and as directed in SSR Part- I.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fasts shall be finished identical to existing finish (without any extra cost to Govt) and removing from site complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4.0 Sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fasts shall be finished identical to existing finish (without any extra cost to Govt) and removing from site complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and as directed by Engineer-in-Charge.

Material and labour for factory made pressed steel frames of size 105 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete including bottom of each chowkhat to be welded with 02 no's 25 x 25 x 3mm angle iron projecting 10cm one either side including one shop coat of red oxide chrome primer and including PCC (1:3:6) type C-0 in back filling of chowkhats and tarring back of chowkhats and holdfasts complete all as specified and as directed.

Material and labour for factory made pressed steel frames of size 125 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete including bottom of each chowkhat to be welded with 02 no's 25 x 25 x 3mm angle iron projecting 10cm one either side including one shop coat of red oxide chrome primer and including PCC (1:3:6) type C-0 in back filling of chowkhats and tarring back of chowkhats and holdfasts complete all as specified and as directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed sheet, reinforced with mild steel square tube, supplying and fixing in opening as per specification complete all as specified and as directed.

Supply and fixing 30 mm thick PVC wood grain printed factory made panel door shutter (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded wood grain printed PVC channel and 5mm thick X 15mm wide PVC sheet beading used inside style and rails and decorative PVC beading of 10 X 10mm used instead of exposed portion of PVC sheet beading as in toilet / kitchen cabinet shutters complete all as specified and as directed.

Supply and fixing 30mm thick flush shutters, soild core construction, with particle board core and plywood face panels, both faces are covered with decorative face veenered with lipping / frame to match complete all as specified and directed by Engineer-in-Charge.

Supply and fixing second class hard wood, glazed and skelton shutter 35mm thick open, rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR 2020 Part-I Section 8.24 (b), supplied and fitted to chowkhats complete all as specified and as directed.

Supply and fixing mild steel butt hinges medium weight 100 mm long complete all as specified and as directed.

Supply and fixing box type steel windows / ventilator (factory made) outer frame made out of ERW tube 'P' section 65 X 45 X 25 mm and shutter of ERW tube 'P' section 50mm X 35mm X 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and shown on drawings No CEPZTD-324/07 Sh 1/3 to 3/3. Note: - The quoted rates shall also include: - (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface. (ii) 4 no's MS steel lugs made of 20 X 5 mm Iron flat 200 mm long. (iii) 10 mm Sq Bar grill / guard bar design as per drawing. (iv) PCC block for embedding lugs.

Material and Labour for cement concrete (1:3:6) type C-0 (using 12.5 mm graded crushed stone aggregate) filling in, pressed steel chowkhats, bed block for holdfast and the like complete all as specified and as directed.

Supply and fixing framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks, cupboard frame etc (including cutting holes in brick masonary walls and fixed with PCC 1:1 1/2 : 3) and similar work confirming to Fe.290.Gde-E-165 complete all as specified and as directed.

Material and Labour for applying two coats of synthetic enamel paint on wooden surface over one coat of pink primer including preparation of new surface over 10cm width or girth complete all as specified and as directed.

Material and Labour for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surface complete all as specified and as directed.

Supply and fixing GI tubing 20 mm bore medium grade including all necessary fittings laid in floors or fixed in walls or ceilings complete all as specified and as directed.

Taking up or down steel tubing 20mm bore and connection complete all as specified and as directed.

Supply and fixing in repair ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 15mm bore fixed in repair complete all as specified and as directed. (Minimum weight 210 grams).

Supply and fixing in repair curtain rods, mild steel, chromium plated with fixing brackets, stops, side finnels etc complete with all fittings complete all as specified and as directed.

Supply and fixing in repair ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20mm bore fixed in repair complete all as specified and as directed. (Mimimum weight 210 grams).

Supply and fixing in repairs bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm dia bore including necessary fittings complete all as specified and as directed.

Supply and fixing in repairs bib taps, cast copper alloy fancy type chromium plated (long body) with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm dia bore including necessary fittings complete all as specified and as directed.

Supply and fixing in repairs stop cock, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and as directed.

Supply and fixing in repairs stop cock, chromium plated fancy type cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 20mm dia bore complete all as specified and as directed.

Supply and fixing in repairs stop cock, chromium plated fancy type with long shank and cup (concealed type) cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified including cutting walls / tile and making good the disturbed surface complete all as specified and as directed.

Supply and fixing in repairs chromium plated angular stop cock, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and as directed.

Supply and fixing in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, of size 15mm dia bore complete all as specified and as directed.

Material and Labour for repairing of old chromium plated bib taps, pillar taps, wash hand basin mixture, stop cock, angle valve, concealed stop cock and similar items by changing its brass phases and making it functional to the entire satisfaction of user and Engineer-in-Charge complete all as specified and as directed at site.

Supply and fixing in repair waste fittings, brass, chromium plated with long screwed shanks and fly nuts of size 32mm complete all as specified and as directed.

Supply and fixing in repair looking mirror of size 600mm x 450mm with PVC moulded frame and hard board back white colour complete all as specified and as directed.

Supply and fixing in repair PVC connection 15mm bore and 450 mm long with brass or PVC nuts and PVC washer complete all as specified and as directed.

Supply and fixing in repair PVC waste pipe 32mm bore complete all as specified and as directed.

Material and Labour for repairing of PVC low level / high level cistern by changing its internal fitting including PVC flush pipe etc complete all as specified and as directed at site.

Cleaning of water storage tank completely by removing all scale dirt / dust of any description complete all as directed at site and writing date of cleaning with synthetic enamel paint including all material and labour of capacity exceeding 250 litres and not exceeding 500 litres including dismantling and refixing if required complete all as specified and as directed.

Cleaning of water storage tank completely by removing all scale dirt / dust of any description complete all as directed at site and writing date of cleaning with synthetic enamel paint including all material and labour of capacity 1000 litres including dismantling and refixing if required complete all as specified and as directed.

Fixing only PVC seat cover for EWC, white colour including brass chromium plated hinges complete all as specified and directed at site.

Supply and fixing in repairs chromium plated brass jet spray with flexible pipe not less than 90 cm long fixed to EWC suitable for 15mm bore complete all as specified and directed at site.

Supply and fixing in repairs PVC flushing cistern 10 litre capacity make should be engraved on the body including flushing pipe chormium plated 90 cm long, pair of bracket etc complete all as specified and as directed.

Supply and fixing in repairs tubular towel rail, 20mm dia, 'D' type 60cm long between flanges of brass chromium plated complete all as specified and as directed.

Supply and fixing in repairs brass chromium plated shower rose with arm not less than 125mm dia with or without swivel joints, including fixing to steel pipe complete all as specified and as directed.

Supply and fixing in repair125 mm dia steel grating fixed in position complete all as specified and as directed.

Supply and fixing in repair 125 mm dia steel grating with hole fixed in position complete all as specified and as directed.

Supply and fixing in repair Aluminium door stopper 150mm for doors complete all as specified and as directed.

Supply and fixing in repairs Helical door spring of size 300 mm including welding to steel chowkhats complete all as specified and as directed at site.

Supply and fixing in repairs galvanised mild steel wire cloth 0.50 nominal dia of wire and average width of aperture 1.18mm complete all as specified and as directed.

Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Hacking out old broken glass of any thickness, size, quality or description from the wooden frames glazing with putty or fixed with wooden beads complete all as specified and as directed.

Supply and fixing figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane of thickness 3mm complete all as specified and as directed.

Supply and fixing 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fixing 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fixing Aluminium anodized, barrel tower bolt of extruded section, 150mm long complete all as specified and as directed.

Supply and fixing Aluminium anodized, barrel tower bolt of extruded section, 200mm long complete all as specified and as directed.

Supply and fixing in repairs Aluminium handle, cast type, anodized, 150mm size complete all as specified and as directed.

Supply and fixing butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized, 75mm size complete all as specified and as directed.

Supply and fixing in repair floor door seal one metre long of mild steel body with fibre brushes complete all as specified and as directed.

Supply and fixing 15 mm dia bore in repairs brass chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed.

Supply and fixing 15mm dia bore in repairs brass chromium plated wash hand basin mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed.

Supply and fixing 15mm dia bore in repairs brass chromium plated kitchen sink mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed.

Supply and fixing hasp and staple 150mm long safety type aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws, fixed in repair complete all as specified and as directed.

Material and labour for cement concrete 50mm thick in (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in flooring, finished even and rough complete all as specified and as directed.

Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Material and Labour for machine pressed precast concrete interlocking in glossy finish with coloured paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 grade complete all as specified and as directed.

Material and Labour for plain cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in copings etc and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form works complete all as specified and as directed.

Material and Labour factory made precast hand crafted chequered cement concrete M-40 grade coloured tiles 30cm X 30cm X 25mm thick, polymer moulded set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment over and including screed bed and bedding layer of mortar 20mm thick in cement plaster (1:6) for laying floor finishes as per design / pattern approved by Engineer-in-Charge complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removing unserviceable material outside cantt area complete all as specified and directed by Engineer-in-Charge.

Demolition of brick masonary built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed.

Material and labour for plain cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in surface channels and drains including formwork complete all as specified and as directed.

Material and labour for rendering 10mm thick cement plaster in cement mortar (1:4) on bricks or concrete surface and finished even and smooth without using extra cement complete all as specified and as directed.

Material and Labour for brick work of old size sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed.

Description same as per Ser Item No 121.00 here-in-before but except bricks complete all as specified and as directed.

Material and labour for rendering 15mm thick in CM (1:4) on fair faces of brick surface finished even and smooth without using extra cement etc. complete all as specified and as directed. (including all necessary scaffolding, lifting arrangement for external surfaces).

Material and Labour for applying one coat of cement based paint including preparation of old plastered surface complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position complete all as specified and as directed. Note: - Reinforcement cut as required to facilitate demolition.

Material and labour for Pre-cast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in manhole cover slab fixed in position including necessary form work and set in CM (1:6) complete all as specified and as directed.

Material and labour for mild steel TMT 6 to 8 mm dia cut to length, bent to shape, required including cranking, bending, spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Supply and fixing in repairs galvanized two strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. Note: - Each line wire to be measured.

Re-straining and resecuring including making good staples etc, galvanized two strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. complete all as specified and as directed. Note: - Each line wire to be measured.

Dismantling and refixing in position to distrupted RCC / MS posts and struts (of any description) in fencing including necessary excavation, PCC (1:3:6) and securing barbed wire, cutting tops to shape, drilling holes, notching for wire including all necessary drilling, bolting or riveting etc and similar work confirming to Fe-290 grade complete all as specified and as directed.

Dismantling and refixing in position to distrupted MS / CI steel gates / door not exceeding 10 sqm after necessary repair work / welding etc to existing grills, frames, rollers, gusset plates, rails, braces, hooks, sheets, holdfast etc complete and making good to existing surfaces complete all as specified and as directed at site. Note: - Any steel member to gate shall be measured and paid separately.

Dismantling fencing wire mesh any type complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) of any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out in soft / loose soil, returning, filling in and ramming earth or broken rubbles mixed with earth around in layers not exceeding 25cm complete all as specified and as directed.

Material and labour for plain cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

Supply and fixing posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, flat iron fillets (for securing wire mesh) including all necessary drilling, bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

Material and labour for mild steel rag or lewis bolts 12mm dia and nuts screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, not exceeding 15cm complete all as specified and as directed.

Material and labour for mild steel round bars 8mm dia and over of Fe-410 W quality 'A' or Fe-290 quality 'A', bent to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips in chain link fencing complete all as specified and as directed.

Material and labour for mild steel in flat, round or square bars, in available length 40 X 6 mm FI strip fixed to chain link fencing complete all as specified and as directed.

Supply and fixing chain link fencing of 4mm dia GI wires and 50 X 50mm mesh size including rails, straining bolts etc including provision of binding wire complete all as specified and directed.

Supply and fixing chequered coloured cement concrete tiles 30cm X 30cm X 25mm thick set, jointed and pointed in cement slurry in floors with grey pigment cement and pigments including and over 15mm thick screed bed or bedding layer of CM (1:4) set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles finish complete all as specified and directed.

Material and labour for cement concrete (1:5:10) type E-2 (using 40mm graded crushed stone aggregate) as in foundation, sub base etc complete all as specified and directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - All plumbing works shall be laid or fixed as to be completely air tight or water tight as specified and Contractor will furnish its certificates towards air / water tight before completion of work under the Contract. NOTE NO 4: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

Shri Karshni Builders

M/s Koul & Sons

M/S ROMESH KUMAR SHAN

bushan kumar

M/S VERMA ENTERPRISES

M/S LANGER CONSTRUCTION COMPANY

M/S STAR CONSTRUCTIONS

M/S SURINDER KUMAR

Bidder Name

Shri Karshni Builders

M/S VERMA ENTERPRISES

M/s Koul & Sons

bushan kumar

Mehta Enterprises

M/S STAR CONSTRUCTIONS

M/S ROMESH KUMAR SHAN

M/S LANGER CONSTRUCTION COMPANY

M/S SURINDER KUMAR