REPAIR/POLISH/PAINTING OF MAP FURNITURE AT BARRACKPORE UNDER GE BARRACKPORE

Amount

REPAIRS TO CHARPOY IP HARD TOP (DRG NO: FD/MAP-II/01):-

TOP Removing of old unserviceable top from its existing position and replace the same with new top of 12 mm thick BWR grade both sides commercial plywood (seven Nos of ply) complete all as shown on drawing as directed by Engineer-in-Charge. (Make of Plywood : Century ply/Green ply/National ply/ Kitply as approved)

PAINTINGS OF CHARPOY IP HARD TOP M & L for applying spray painting two coats with Black paint by spray gun after removing of existing old worn out paint by any means with proper treatment from Charpoy IP hard top complete all as directed shown drawings.

REPAIRS TO CHAIR VERANDAH JCO/OR MAP (DRG NO.FD/MAP-II/15):-

SEAT Removing of old unserviceable PVC seat from from its existing position and replace the same with new PVC seat 4mm thick and grooves 90X10mm 10 Nos on seat complete all as shown on drawing as directed by Engineer-in-Charge. (Make: Brite/Cello/Supreme/Neel Kamal/AMKO as approved)

BACK Removing of old unserviceable PVC back from its existing position and replace the same with new PVC 4mm thick back to make completely functional rest all as shown on drawing or directed by Engineer-in-charge. (Make:Brite/Cello/Supreme/Neelkamal/Amco as approved)

HARD RUBBER Removing of old hard rubber from its existing position and replace the same with new hard rubber all as shown on drawing and directed by Engineer-in-Charge.

PAINTINGS OF CHAIR VERANDAH M&L for applying spray painting two coats with synthetic enamel (white) paint over a coat of red oxide primer with spray gun after removing of existing old worn out paint by any means with proper treatment from chair verandah complete all as directed and shown on drawings.

REPAIRS TO TABLE DINING FOR 6 PERSON 1500X900MM MAP FOR THE FOLLOWING (DRG NO : FD/MAP-II/03):-

TOP Removing of decayed top from its existing position and replace the same with new top made out from 18/19mm thick prelaminated particle board (exterior grade), Grade-I quality, prelaminated one side with decorative choice lamination and other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak / Seasam) beading all-round the edging complete all as shown on drawing and as directed by Engineer-in-Charge. (Make of Plywood : Century ply/Green ply/National ply/ Kitply as approved)

HARD RUBBER / PVC RING Removing of each decayed hard rubber / toe from its existing position of table dining and replace the same with new hard rubber / PVC toe 25mm and 25mm high all as shown on drawing and directed by Engineer-in-Charge.

POLISHING TO TABLE DINING FOR 6 PERSON MAP Removal of old existing worn out polish from exposed portion of wooden surface by any means of table dining including preparation of ew wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking,numbering) and appply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engineer-in-Charge.

REPAIRS TO CHARPOY FOLDING IP HARD TOP (DRG NO.FD/388(R):-

TOP Removing of old unserviceable top from its existing position and replace the same with new top made out of 8mm thick BWR Phenoled commercial plywood (un-polished) cut into two pieces to facilitate folding of bed all as shown on drawing. (Make of Ply wood : Century ply/Greenply/National ply/Kit ply as approved)

FLAT IRON Removing of old unserviceableflat iron from its existing position and replace the same with new MS flat iron of size 220mmx60mmx32mm cut to shape and bent @ 150 to avoid fouling with leg all as shown on drawing.

PAINTINGS OF CHARPOY FOLDING IP HARDTOP M&L after removing of existing old worn out paint by any means with proper treatment from charpoy IP Hard top and applying spray painting two coats with synthetiic ename l OG paint over a coat of red oxide primer complete all as dircted and shown on drawings.

REPAIRS TO COMPUTER CHAIR / REVOLVING CHAIR WITH ARMS (DRG NO - TP & FD/E6/MAP/01):-

WHEEL Removing of old unserviceable revolving wheel from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with revolving wheel PVC 40mm to make completely functional rest all as shown on drawing or directed by Engineer-in-charge.

HYDRAULIC SYSTEM Removing of old unserviceable hydraulic system from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with new hydraulic system to make completely functional rest all as shown on drawing or directed by Engineer-in-charge.

BASE Removing of old unserviceable base from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with new base to make completely functional rest all as shown on drawing or directed by Engineer-in-charge.

SEAT Removing of old unserviceable seat from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with new seat to make completely functional rest all as shown on drawing or directed by Engineer-in-charge.

BACK Removing of old unserviceable back from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with new back to make completely functional rest all as shown on drawing or directed by Engineer-in-charge.

ARMS Removing of old unserviceable arms from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with new back to make completely functional rest all as shown on drawing or directed by Engineer-in-charge.

PAINTING OF ALMIRAH LARGE STEEL 1/2 H 1/2S (DRG NO :FD-1033):-

M&L for applying spray painting two coats with synthetic enamel (Olive Green) paint internally and externally by spray gun after removing of existing old worn out paint by any means with proper treatment from Almirah large steel complete all as directed shown drawings.

PAINTING OF ALMIRAH MEDIUM STEEL 1/2 HANGING 1/2 SHELF (DRG NO : FD-1034):-

M & L for applying spray painting two coats with synthetic enamel (Olive Green) paint internally and externally by spray gun after removing of existing old worn out paint by any means with proper treatment from Almiram medium steel 1/2H 1/2S with shelves complete all as directed shown drawings.g.

REPAIRS TO TABLE DRESSING GENTS FOR THE FOLLOWING (DRG NO.FD/E6/MAP/16):-

BACK Removing decayed side from its existing position and replace the same with new side made out from 12 mm thick veneered particle board (exterior grade) , grade-I quality with commercial veneers on both faces all as shown on drawing. (Make of Ply wood : Century Ply/Greenply/National ply/Kit ply as approved)

MIRROR Removing broken mirror from its existing position and supply and fixing for copper plated 5.5mm thick mirror mounted on new frame made out 12 mm thick ply wood (seven Nos of ply), type BB, BWR grade and covered by decorative mould and supported on 50mm X28mm frame all-round complete all as directed all as shown on drawing. (Make : Modiguard/Saint gobain/Atul as approved)

SHELVES S&F for 5mm thick glass shelves in cabinet supported on glass holders including taking down broken shelves complete all as specified and shown on drawing. (Make : Modiguard/Saint gobin/Atul as approved)

MAGNET CATCH S&F for magnet catch inside the cabinet to catch mirror frame including taking down unserviceable magnet catch all as specified on drawing.

LEGS: Removing decayed each leg of dressing table of 38mm X 38mm from its existing position and replace the same with new leg made out well seasoned 1st class hard wood (Teak/Seasom) complete all as specified and directed.

SIDE Removing decayed side from its existing position and replace the same with new side made out from 18mm thick veneered particle board (exterior grade) grade-I quality with one face teak and other face commercial veneer all as shown on drawing. (Make of Ply wood : Century Ply/Greenply/National ply/Kit ply as approved)

REPAIRS TO TABLE DRESSING LADIES WITH STOOL FOR THE FOLLOWING (DRG NO.FD-MAP-II/07) :-

TOP Removing decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), grade-I quality, prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak/Seasam) beading allround the edging provide middle stiffener at the bottom 100mm high between the lower short side rails and provide PVC shoes 25mm dia and 25mm high shall be screwed to bottom of all legs all as shown on drawing.

SIDE Removing decayed side from its existing position and replace the same with new side made out from 18mm thick veneered particle board (exterior grade) with one face teak and other face commercial veneer all as shown on drawing.

BACK Removing decayed side from its existing position and replace the same with new side made out from 12 mm thick veneered particle board (exterior grade) with commercial veneers on both faces all as shown on drawing.

DRAWER Removing drawer and replace the side and back of drawer made out from 12mm thick well seasoned 1st class hard wood (Teak/Seasam) bottom of the drawer shall be made out from 6mm thick ply wood (five Nos of ply), type BB, BWR grade front of the drawer shall be made out from 18mm thick veneered particle board (exterior grade) with commercial veneers on both faces with 1.00mm thick plastic laminated sheet (plain & wood grain) pasted over particle board with approved synthetic adhesive all as shown on drawing.

MIRROR Removing broken mirror with frame and supply and fixing for mirror 5.50 mm thick 355mmx1220mm size free from any cracks/scratches and distorted image etc mounted on 6mm thick ply wood (five Nos of ply), type BB, BWR grade and with 25mmx19mm teak wood well seasoned timber frame all as shown on drawing. (Make : Modiguard/Saint gobain as approved)

SIDE OF DRESSING STOOL Removing decayed side from its existing position and replace the same with new article made out from 18mm thick veneered particle board (exterior grade) with one face teak and other face commercial veneer all as shown on drawing.

TIMBA

SANKAR TRADERS

PUNAM ENTERPRISE

B N ENTERPRISE

TAMALIKA ENTERPRISE

REMCO

RELIABLE TRADERS AND ENGINEERS