Ottapalam BP 2019-20(Pro.No.158/20) Pakal Veedu Vaniyamkulam -Electrfication

Amount

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties,tie mounts etc.as required(RoHS compliant modular accessories)

Single Control light point with 6A, plate ceiling rose - Short point (90.2.1.1 )

Twin Control light point with 6A, plate ceiling rose - Short point (90.2.1.2)

Single Control light point without ceiling rose - Short point (90.2.1.3 )

Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator. - Short point (90.2.1.4)

Combined plug point with 6 A, 5 pin plug socket controlled by 6A switch in the same switch board as that of light points. (90.2.1.6)

Independent Plug - Short Point ( 90.2.1.7 )

Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.

1200 mm 1X20W LED Lamp with box type fixture (90.3.20.3)

Do - directly on wall using 2 nos. flat iron brackets made from 25x6mm flat iron, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire and giving connection etc. as required.

1200 mm 1X20W LED Lamp with box type fixture (90.3.22.3)

Supply and fixing cast aluminium stove enamelled bulk head fitting with deep drawn anodised aluminium body,epoxy powder coated,heat resistant prismatic glass cover suitable with 7w LED bulb to wall/ceiling including giving connections with required length of 16/0.20mm PVC insulated 3 core round copper conductor flex wire conforming to to relevant ISS or extending the original wiring and making good the surface as required.(od15213/ 2019_2020)

Supply Conveyance, installation, testing and commissioning of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98,RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) (90.15.4.3)

Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.25 mm dia with HG company fabricated clamps.(90.3.18.1)

Supply and fixing angle / straight brass lined skirt type, bakelite batten holder with 200mm Plastic shade and 7 W LED lamp and giving connection etc as required. (od15215/2019_2020)

Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.

1200mm sweep - 5star rated ceiling fan complete with 300mm down rod,canopies, shackeles etc. working on 230V/240V single phase A/C (90.4.5.2)

Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.(90.4.1)

Supply and providing every additional length of down rod of 15mm heavy gauge GI / WI pipe with 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming in relevant ISS or with original wiring extended including painting as required. (od20558/ 2019_ 2020)

Supply and fixing the following sizes of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required. 20 mm dia light gauge.(od15219/ 2019_2020)

Supplying and fixing of following sizes of light class PVC conduit along with accessories in surface including cutting the wall and making good the same in case of recessed conduit as required.25 mm.(od15220/2019_2020)

Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

1.50 sq.mm 2 Run (1.17.2)

2.50 sq.mm 2 Run (1.17.11)

4.00 sq.mm 2 Run (1.17.20)

Supply and drawing FRLS PVC insulated & sheathed 650/ 1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm.(90.6.6.3)

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 3 Module (100mmX75mm) (1.27.2)

Do - 8 Module (125mmX125mm) (1.27.5)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 amp socket outlet.(1.24.5)

Do - Do - 15/16 amp switch. (1.24.3) (1No. For flood light control)

Do - Do - 3 pin 5/6 amp socket outlet. (1.24.4)

Do - Do - 5/6 amp switch. (1.24.1)

Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board,240v,on surface/ recess,complete with tinned copper bus bar, neutral bus bar,earth bar,din bar,interconnections,powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator,12 way Double door.(2.3.3)

Supplying and fixing FP enclosure MCB DB sheet steel phosphatised , painted, dust and vermin proof (Od12605/ 2018_2019)

Supplying and fixing DP enclosure for independent mounting of MCB DB sheet steel phosphatised, painted, dust and vermin proof enclosure on surface/recess complete with connections,testing and commissioning etc.as required. (2.16)

Supplying and fixing following rating,double pole,240volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc as required.40 amps. (2.12.1)

Do - double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps (2.14.1 )

Do - 5 amps to 32 amps rating, 240/415 volts, "C" curve, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole. (2.10.1 )

Do - 6A to 32A ratings DP MCB "C" curve,10 kA breaking capacity in the existing MCB DB complete with connections,testing and commissioning etc.as required. (2.10.3)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2 metre long etc. with charcoal/coke and salt as required.(od14959/2019_2020)

Providing and fixing 25mmx3mm G.I strip earth lead from the test joint to the earth plate. (od14961/2019_2020)

Do - 2x25mmx3mm G.I strip test joint for earthing system. (od68978/2018_2019)

Supply and drawing bare earthing conductors of the following sizes along with wiring / cables and giving connection as required. 2.00mm copper conductor (14SWG) (od14862/2019_2020)

Do - Do - 3.15 mm copper conductor (10 SWG) (d14864/2019_2020)

Supply and laying bare earthing conductors of the following sizes laid 0.6 m below ground level including excavating trench of suitable size and refilling etc. as required (in ordinary soil) 3.15mm copper conductor.(10SWG) (od21872/2019_ 2020)

Suplying,threading,laying and jointing of 15mm B class GI pipe with all required accessories in ground in the existing trench as protective covering to earth leads.(od21874/ 2019_2020)

Supply of superior quality 2.00mm copper earth socket and including crimping etc.as required. (od14945/2019_2020)

Do - 3.15mm copper earth socket and including crimping etc. as required. (od14947/2019_2020)

Supply and providing 12x3mm brass bolt and with washer etc.as required.(od14949/2019_2020)

Do - 25 x 6 mm brass bolt & nut sizes with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required. (od14951/2019_2020)

Supply & installation of dust and vermin proof, 1 Phase Sintex Meter Board( GS-MB- 3525 (350x250x150)) including p/f 32 A HRC Fuse Base with HRC Fuse link ,32 A neutal link and to fix KSEB meters, etc as required including fixing it on wall, making good the damages colour washing etc. as required. (od14963/ 2019_2020.)

Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.25 mm dia with HG company fabricated clamps. (90.3.18.1) For Srevice Pipe.

Supply and providing M8 anchor bolt hook in wall / parapet for binding support for service main.

K.R.BALASUBRAMANIYAN

P. PRADEEPAN