Survey Investigation Design Supply Installation,Testing Commissioning of Tank Filling Scheme Head Works consisting of construction of Intake well,Jack well cum pump house, Vertical Turbine Pumps coupled Motors, Pump house electrical works, Necesary valves, Delivery Pipe, Manifold system, electrical panel soft starter capacitor 100kVA transformer 11kVpowerline & Rising Main for Filling up of Kempkere Tank by lifting water from Shalmala halla Hubli,Dharwad Dist.O&M 1yr aftr completionTurnkey Basis

The intending bidder can submit bids as an Individual bidder along with Tie up of pump manufacturer. The Tie up is to be formed prior to the bidding. Tenders from a Tie-up proposed in this bid, the bidder shall upload an agreement with only one pump manufacturer on Rs 500-00 stamp paper in the prescribed format which shall be concluded prior to bidding and enclosed to the bid document. For proof of the Tie up, in the technical bid, the prescribed format under section 2 instruction to tenderer (ITT) shall be followed.

To qualify for award of this contract, the tenderer in his / her name should have achieved in the last five years (i.e., 2021-22 to 2025-26) should have satisfactorily completed (at least 90% of contract value) as a prime contractor, at least one lift irrigation scheme/tank filling scheme of value not less than Rs. 4.65 Crores. Work done certificate issued by an officer not below the rank of EE of the concerned division and countersigned by the SE of the concerned circle is to be uploaded for the technical bid. The cost of completed works of the previous year shall be given a weightage of 10% per year to bring it to the price level of financial year in which tenders are invited.

The intending Bidder (Individual)/Tie-up partner should have supplied and successfully commissioned at least 1 number of Submersible pumps with a capacity (flow rate) not lessthan 0.033cumecs for each pump with a head not less than 90 m for each pump during the last 5 years (i.e., from 2021-22 to 2025-26). The necessary work done certificate issued by an officer not below the rank of EE and countersigned by the SE of the same circle should be uploaded.

The intending bidder (Individual) should have supplied, erected, tested, completed and commissioned HDPE not less than 225 mm Outer diameter for a length of at least 4.9 kms in any one year during last 5 years (i.e., from 2021-22 to 2025-26). The work done certificate should be obtained from a competent authority not below the rank of EE of the concerned division and countersigned by the SE of the concerned circle.

The intending bidder (Individual) should have executed in any one year, the following minimum quantities of work during the last 5 years (i.e., from 2021-22 to 2025-26). The necessary work done certificate issued by an officer not below the rank of EE and countersigned by the SE of the same circle should be uploaded 1) Earthwork Excavation-6,400 Cum 2) Reinforced Cement Concrete,(M15 and above)- 300 Cum 3) Reinforcement steel-32 MT

Liquid asset and/or availability of credit facilities of not less than Rs. 3.06Crores (unconditional credit lines/letters of credits/certificates from nationalized/scheduled banks) for meeting the fund requirement etc. The contractor should upload necessary documents issued by then nationalized/scheduled/commercial banks as per prescribed format enclosed as Annexure XIV. Further the agency has to furnish the above credit facilities for the entire work period as per tender

The annual turnover from all classes of civil engineering works should be costing not less thanRs. 18.59 Crores, in any of the two financial years during the last five years (i.e., 2021-22 to 2025-26). Audited profit and loss account certified by a practicing Chartered Accountant along with the copy of income tax returns filed for the years indicated above should be furnished. Duly mentioning UDIN on Turnover certificate (from CA). (The annual turnover of previous year shall be updated to the year of tender invitation at 10% per annum).

Income tax returns of last 5 years.

BID CAPACITY Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value Rs. 929.93Lakhs. The available tender capacity will be calculated as under Assessed available tender capacity equal to AxNx1.5-B WhereA equal to Maximum value of civil engineering works executed in any one year during the last five years updated to 2026 27 price level taking into account the completed as well as works in progress.N equal to Number of years prescribed for completion of the works for which tenders are invited. Bequal to Value at 2026 27 price level, of existing commitments and on going works to be completed during the next 12 months (period of completion of the works for which Tenders are invited) If a bidder participates in more than one bid and technically qualifies and subsequently becomes lowest in more umber of bids than his her bid capacity then the tenderer can give his option to select the works based on his her preference equivalent to his bid capacity. Further for the balance bids next lowest bidders will be eligible to accept at lowest bidders rates equivalent to their bid capacity provided if the competent authority accepts it. Note The statements showing the value of existing commitments and on going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge not below the rank of an Executive Engineer or equivalent. Even though the Tenderers meet the above criteria, they are subject to be disqualified if they have made misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements and or record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion litigation history or financial failures etc and or participated in the previous Tender for the same work and had quoted unreasonably high tender prices and could not furnish rational justification

A copy of the KPWD Class-I/ CPWD-Class I & above.

Copy of Valid Employees Provident Fund Registration Certificate with recently paid challan copy.

The intending bidder/firm/company should furnish list of Man power, machinery available with them for taking up the work as per section 3.

The details in support of qualification criteria as mentioned in para 4.0 below.

Second Electronic Document (financial Bid) of the successful bidders who qualify in the technical bid will be opened after approval to the technical bid from the competent authority.

Valid copy of ESI registration Certificate

Copy of Valid GST Registration Certificate & PAN card

Technical details containing document with preliminary designs, working methodology in support of their bid as per the bidding document.

Each Tenderer should further demonstrate:(a) Availability by owning at least 50% of the required / specified key and critical equipment for this work and (b) the remaining 50% can be deployed on lease / hire basis for all the works provided, the relevant documents (commitment agreements etc.) for availability for this work are furnished. The following key and critical equipment for the work. Modified as per G.O.No. FD 4 PCL 2008 dated 14/10/2008. List of plant/machinery Details of Machinery/Equipment 1) Tippers (5.0 m3) Total 2 Nos (1No own & 1No Hire/Lease) 2) Excavators (1.5 m3)- Total 2Nos (1No own & 1No Hire/Lease) 3) Water tanker (4000 ltrs)- Total 2Nos (1No own & 1No Hire/Lease) 4) self loader concrete mixer- Total 2Nos (1No own & 1No Hire/Lease) 5) CRANE - Capacity 10 Tonnes above- Total 1No own/Hire/Lease

The necessary certificates/documents in support of pre-qualification criteria fulfilled as stipulated shall be scanned and attached to e-tender document. The scanned signature of the bidder /authorized representatives of the bidder shall be attached while uploading the bid document.

The intending bidder/firm/company should furnish list of Man power, machinery available with them for taking up the work.

First Electronic Document (Technical Bid) shall contain the following qualification documents.Forindividual Biddersa.Copy of the valid KPWD/CPWD Class I Registration Certificate b.Copy of the valid Employees Provident Fund Registration Certificate along with latest paid challan copy.c.Copy of the valid GST Certificate & PAN Card.d.Income tax returns of last 5 years.e.The intending bidder/firm/company should furnish list of Man power, machinery available with them for taking up the work

Second Electronic Document (Financial Bid) shall contain the following qualification documents.The tender (in the format indicated in section 4)Priced bill of quantities