Loading…
Loading…
Tender Value
₹3.9 L
EMD Value
₹3,928
Closing Date
25 Mar 2026, 3:30 pmClosed
GUNTUR MUNICIPAL CORPORATION
GUNTUR
CONSTRUCTION OF COMPARTMENTS FOR C& D MATERIAL COLLECTION CENTER AT VARIOUS PLACES GUNTUR MUNICIPAL CORPORATION
917066
ET NO.87/2025-26 ITEM NO-07
OPEN - NCB
Civil Works
GUNTUR, ANDHRA PRADESH
1 document required · 1 mandatory
₹140
₹3,928
20 Mar 2026
20 Mar 2026
20 Mar 2026
Earthwork excavation in Ordinary soil by Manual Means upto 3 m depth for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1(B)) - 1 Cum 51)
Filling of Stone Crusher Dust for foundation trenches including cost and conveyance off all materials and all labour charges ramming,watering etc, as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH
Laying of Plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 / 53 grade at cement as per Clause 1501.2.2 (M30 Grade) at 400 kg per cum, coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.28 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, near approaches to bridge / culvert and construction joints, and curing of concrete slabs for 14- days and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.
Masonary works in CM (1:6) Propostion with fly ash Cement Solid blocks of size 290X225X140mm for Manufacturing of Fly ash Solid blocks using fly ash of 80 kgs,Cement of 15kgs gyspum of 5kgs and stone dust including cost and conveyance of all Materials and labour charges ,scaffoldidng and curing charges etc.. complete with a Compressive streanth of not less than 50kg/Sqm for walls.
Plastering in C.M (1:3) 12 mm thick including cost and conveyance of all Material, Labour for mixing Material, laying and curing etc., complete - 10 Sq.M. (BLD-CSTN-6.2)
Carting away the surplus excavated earth from the work site with a lead of 3 km beyond initial lead including loading, unloading and conveyance but excluding stacking charges etc., complete - 1 Cum.
Supply and fixing of MS Plats and its fabrication charges etc, complete for MS Pipes 1 Kg
Provision for Seignorage charges
Provision Towards Demerit 2%
Provision Towards DMF 30%
Provision for NAC @ 0.10%
Provision for GST @ 18%
Provision for TPQA @ 0.739 %
Unforeseen item
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.01 MB
Tender Document.doc
TENDER_DOCUMENT • 0.44 MB
449519.xlsx
TENDER_DOCUMENT • 0.07 MB
DECLARATION.docx
TENDER_DOCUMENT • 0.02 MB
Notice Inviting Tender item 2.docx
TENDER_DOCUMENT • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .