SPL REP TO FENCING OF CERTAIN OFFRS MD ACCN AT SHAITAN SINGH ENCLAVE AND SPL REP TO EXISTING SEWAGE LINE ALLIED WORKS IN CERTAIN LOCATION OF MECH INF AND OTHER SANCTION WORK IN THE AREA OF AGE B R II UNDER GE ARMY CENTRAL JODHPUR

Amount

B/R ITEMS Cutting and grubbing of bushes / shrubs / babool branches etc surrounding manholes, gully trap,wall pipe and sewage line aligment etc and levelling of ground around the manholes,sewage line and finish the surface of wall and removing the waste material to a distance exc 50m and n exc 500m and clearing the site.complete all as specified and directed. Note:- (i) All T&P (like JCB etc) and equipment's required for clearance of site,safety equipment shall be arranged and made available by the contractor. (ii)All safety measures for workmen to do work shall be provided by the contractor. (iii) If any existing govt assets (Like electric cables,water pipe line,storm water drain boundary walls etc) are damages during the site clearance/excavation contractor should repair the same with time without any delay at his own cost. (iv) Contractor (bidder) shall note understand that the rate quated by him & in r/o of site clearance items shall be deemed included in quated rate and no extra on this account is admissible.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr depth for foundation etc., or forshafts, wells,cesspits, manholes, Pier holes etc not exc 10 sqm on plan and not exc 1.5 mtr in depth and getting out in any type of soil, complete all as specified and as directed.

All as per item No. 2.00 here-in-above but depth exc 1.5 mtr and not exc 3.0 mtr deep, complete all as specified and directed.

M & L for plain cement concrete(1:3:6), type C-2 [using 40 mm graded crushed stone aggregate] bed to drain pipe 150mm bore including packing under and hunching against the pipe after they are laid including necessary formwork complete all as specified and as directed.

All as per item No. 4.00 here-in-above but suitable for 200 mm bore pipe, complete all as specified and directed.

M&L for hardcore of gauge not exceeding 63 mm of broken stone, spread and levelled in layers not exceeding 15 cm thick, with 8-10 tonne power roller, watered and rammed to a true surface, complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base to floor, complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) of 150mm bore set in cement mortar including PCC in bed and haunching against side complete all as specified and as directed. Note :- Excavation and earth work shall be measured and paid separately.

All as per item No. 8.00 here-in-above but suitable for 200 mm bore pipe, complete all as specified and directed.

Supply & laying jointing and testing 200mm bore reinforced cement concrete pipes class NP-2 laid and jointed in cement mortor 1:1 complete, with collars or socket/spigot type laid jointed and haunching at side in cement complete all as specified and directed.

All as per item No. 10.00 here-in-above but suitable for 200 mm bore pipe, complete all as specified and directed.

Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm in soft/disintegrated rock, complete all as specified and as directed.

Removing excavated material soft/disintergrated rock to a distance exc 250m but n exc 500m, complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel [½ round or ¾ section] in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 150 mm bore of pipe, complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel [½ round or ¾ section] in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 200 mm bore of pipe, complete all as specified and as directed.

Dismantling of cast iron of CI drain pipe/PVC (SWR) pipe jointed in cement mortor of any size, complete all as directed.

S&F of 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with & including MS clamp, complete all as specified and as directed by Engr-in-charge

S&F of 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with & including MS clamp, complete all as specified and as directed by Engr-in-charge

S&F 100mm bore sand cast iron (soil waste and vent) pipes in any length with or without ears with cement joints laid in trenches, including cutting hole where required, complete all as specified and as directed.

S&F 75mm bore sand cast iron (soil waste and vent) pipes in any length with or without ears with cement joints laid in trenches, including cutting hole where required, complete all as specified and as directed.

M&L for cutting to Bituminious road for laying of RCC hume pipe and repair/ making good with by using material to match with existing surface/spot (as per roads specification) , complete all as specified and directed.

Cutting of berms as per existing and making good, complete all as specified and directed.

S&F 100mm bore Cast Iron Junction single [single "T"] equal or unequal with access door, complete all as specified and as directed.

S&F 75mm bore Cast Iron Junction single [single "T"] equal or unequal with access door, complete all as specified and as directed.

S&F CI bends any radius 100mm with oval acess door, complete all as specified and as directed.

S&F CI bends any radius 75mm with oval acess door, complete all as specified and as directed.

S&F 100mm bore slotted PVC vent cowl, complete all as specified and as directed.

S&F 100mm bore PVC SWR junction (T) with acces door equal or unequal, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius with access door, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius with access door, complete all as specified and directed.

S&F 75mm bore PVC SWR junction (T) with acces door equal or unequal, complete all as specified and directed.

S&F 110mm bore slotted CI vent cowl, complete all as specified and as directed.

S&F 110mm bore PVC (SWR) Couplers, complete all as specified and as directed.

M&L for stack clamps out of 50X5mm flat iron and 16mm bore. Round iron stays,including bolts and nuts and securing ends of stays to wall or roof for 75mm bore pipe,complete all as specified and as directed.

Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channel or benching and drains including finishing the top of benching even and smooth using extra cement (Forming fair finished channel shall be measured separately), complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms , moulds , mitred/stopped ends etc., complete all as specified and as directed.

M&L for squared rubble walling, Jodhpur type, regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and directed.

Extra over stone walling for hammer dressing to face stone & dressing of face beds & joints as specified of squared rubble walling Jodhpur type brought upto courses with maximum depression of face from straight edge held against the dressed surface n exc 20mm and dressing face beds and joints, complete all as specified and directed.

M & L for PCC 1:2:4, type B-1, using 20 mm graded stone aggregate as in coping to parapet wall, manhole & other similar work and the like including weathering, slightly rounded or chamfered angles and throating and necessary form work, complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar 1:4 on stone masonry surface (Internally) of walls mixed with WPC, as per manufacturer’s instruction and finished the surface even and smooth without using extra cement, complete all as specified and directed.

"Supply only" water proofing compound (ISI Marked), complete all as specified and directed.

Demolition of stone slabs & tiles of any description or thinkness in floors aprons etc laid bedded & pointed in any mortar, complete all as specified and as directed.

S&F 75mm thick Jodhpur type stone slab not exc 2m in length dressed all face & along exposed edged size faced both sided as in drain cover, complete all as specified and directed.

S&F of PVC (SWR)125mm /110mm bore gully trap, setting and jointing with solvent cement, complete all as specified and as directed.

S&F for salt-glazed stoneware gully traps, square or round mouthed,type 'P' of size 15mm x 150mm,complete all as specified and as directed.

S&F cast iron foot steps n exc 5kg each manhole,complete all as specified and as directed.

Dismantling of posts or struts (wood, steel or RCC) any section,embedded in Cement concrete under natural ground including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Dismantling of barbed wire or fencing wire mesh, any type and any size complete all as specified and as directed.

Excavation in post holes each not exceeding 0.5 cu.m, getting out in hard / dense soil, including returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed.

PCC 1:4:8 type D2 by using 40mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and directed.

S&F mild steel sections like angle, flat etc in post and struts in fencing including cutting top to shape as directed,drilling holes,notching for wire etc;flat iron fillets (for securing wire mesh etc including all necessary drilling,bolting or riviting etc confirming to Fe-290Gde E-165 complete all as specified and as directed.

Rolled mild steel work confirming to Fe 410-W, Grade-E- 250, Quality-A as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings [exclusive of steel sheeting or other covering, running rails and guides] and hanging, also fastening and fixing complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n. exc 10cm long and dia 5 to 10 mm complete all as specified and as directed.

Supply only chain link MS galvanised fencing, any size or type (size as approved by GE) complete all as specified and as directed.

Fixing only mild steel galvanised chain link fencing including line wires,any mesh,size and type to any type of standards, rails, straining bolts, etc including provision of binding wire, & bar complete all as specified and as directed.

Supply only Mild steel round or square bars 10mm dia.,in available length Fe-290 (Gde-165) for fixing of chain link fencing complete all as specified and as directed.

M&L for applying 2 coats of synthetic enamel paint on new steel surfaces over a coat of red oxide primer including preparation of surfaces exc 10 cm in width or girth complete all as specified and as directed.

M&L preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and as directed.

Supply, Installation, testing & commissioning of Split type air conditioner electric driven (single phase), cooling capacity 1.5 Ton BEE 5 Star rating, including M&L all acessoseries like copper tubes with insulation puffs, drainage pipe of required length as per site requirement, stand for mounting the outdoor unit on wall/roof etc. complete all as per specified & directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 150 V to 290 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA, complete all as specified and as directed.

M&L for submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLSH PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including 20mm dia PVC conduit with accessories fixed on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 6 sqmm and one run of PVC conduit pipe shall be measured as one length for the purpose of measurement.

Single pole and neutral enclosure with 2 pin earth industrial plug and socket with one MCB SPN 32 Amps, complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no. 3 connected to Earthing test point all as specified or indicated including testing on completion Note : (i) Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover etc complete. (ii) Earth lead shall be up to 7.5 Mtr and rates are deemed to be included for GI pipe 15mm Light grade upto 7.5 mtrs for protection of earth wire 4.0 mm dia, complete all as specified and as directed.

Supply, fixing, testing and commissioning SP 5 to 32 Amps 240V 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the DB complete with connection, complete all as specified and as directed.

Supply, fixing, testing and commissioning SPN 40 Amps 240V 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the DB complete with connection, complete all as specified and as directed.

S&F and testing factory made sheet metal enclosure for MCB DB SPN 8 way 240 volt with double door, IP - 43 protection duly fixed/concealed in wall complete and making good disturbed surfaces of wall, floor etc including necessary connection lugging with copper lugs pin/ring type, complete all as specified and as directed.

Supply,fixing, testing and commissioning of addressable smoke (white colour) detector with mounting base, with inbuilt test button and with power operated / ultra alkaline battery, wireless signal output, max area coverage 49 Sqm with 13 f eet height, including wireless optical smoke sensor, analogue system through radio waves compatibility, plugs into surface base mounting, red LED indication, photo electric light scatter detection principle, 12 V power connection / 9 volts DC battery operating voltage, unique address embedded in detector addressing method, indoor type, moulded ABS, Dimensions: 106mm (Dia) x 36mm (H), complete all as specifeied and directed by Engr - in - Charge. Make GE/Honeywell/Bluestar as approved by GE

Supply, install and testing Intelligent hooter (Red color) with flasher light wireless type in heavy abc engineering plastic box all mounting accessories, complete as required. Inclding transmitter to transmit signal of manual call point / smoke detector, wireless hooter cum flasher with module, analogue smoke sensors through radio waves compatibility, plug into surface base mounting, hooter cum flash light indication, 105 db sound, reads different zones of smoke sensors principle function and push the signals so as to collect and read by wireless panel, 12 volts DC operating voltage, 2 pin 5 Amp socket is required to be connected and charging, 10 Nos 1.2 V (AAA size) battery, 6 Hours power backup, unique address embedded in detector, indoor type, made out ABS Plastic body, complete all as specifeied and directed by Engr - in - Charge. Make GE/Honeywell/Bluestar as approved by GE

Supply,fixing, testing and commissioning of intelligent wireless manual call station (red colour), modern push type emergency button with set & reset button with safety cover, with Lock / un-lock facility optional, radio transmitter through radio waves, fix into moulded box, unique address embedded, indoor type, moulded ABS, complete all as specifeied and directed by Engr - in - Charge. Make GE/Honeywell/Bluestar as approved by GE

Supply,fixing, testing and commissioning of microprocessor based Intelligent wireless digital addressable fire alarm centralised panel, digital type alarm control panel with capacity 100 devices, event historical logging, input AC power supply, automatic battery charger, 12 volts sealed maintenance free lead acid batteries complete with Compatibility - radio emitter through radio waves,Indication, Alarm 105 db, displays different zones of smoke sensors transmitted by Hooter cum flasher, 12 volts DC ( Rechargeable batteries) Operating voltage, two pin 5 Amp socket is required to be connected for charging, 7 to 8 Hours Power Backup, digital nos. display on screen with display manual chart,Indoor type, mild steel body, 12V DC, 1.2 AH Battery, complete all as specifeied and directed. Make GE/Honeywell/Bluestar as approved by GE

M&L for submain wiring with two runs of 1.50 sqmm with one run of 1.00 Sqmm earth wire of 1100V grade FRLSH PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including 20mm dia PVC conduit with accessories fixed on wall / ceiling mounted with PVC saddles and cadmium plated steel screws and connected to common earth dolly complete all as specified and directed. Note :- Two runs of 1.50 sqmm, one run of 1.00 Sqmm as earth wire and one run of PVC conduit pipe shall be measured as one length for the purpose of measurement.

Supply,fixing, testing and commissioning of ABC type fire extiguisher (minimum capacity 6 kg) including fixing accessories such as stand, fasteners etc complete all as directed. Make GE/Honeywell/Bluestar as approved by GE

Note:- (i) All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Repairs/Replacement unless otherwise specifically mentioned as "Supply only" or Fixing only" in BOQ Bidders are required to quote their rates accordingly. (ii) The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount (iii) Makes of materials will be approved by GE in writing before commencement of work. (iv)- Quantities are clubbed in BOQ for different Jobs. For which ref. Annexure-I on Sl. page. No. 31 of tender document.

m/s Firoz khan

JAMWAY MATA CONSTRUCTION COMPANY