15th Finance Commission Untied Grant (2025-26) 1st installment

Providing and applying primer coat with bitumen emulsion . The rate including cost and conveyance of all material, labour charges, etc., complete as per SS and as directed by the departmental officer in charge of the work.

Providing and applying tack coat with bitumen 80/100 grade (Medium setting) (Bulk) using Emulsion pressure distributor at the rate of 0.25 TO 0.3 kgs kgs per sqm on the prepared bituminous / granular surface cleaned with mechanical broom for finished item of work as per MORTH & specification 503 (4th revision) and as directed by the Engineer-in-Charge, but excluding seigniorage charges

Providing and laying of 50 mm thick Bituminous Macadam (BM) with Hot mix plant producing and average output of 37.5 tonnes per hour using hard blasted granite crushed aggregates of grading - II as per table 500-4 of MORTH specification 504 (4th Revision) premixed with bituminous binder of 80/100 grade @ 3.3% by weight of total mixture, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction for finished item of work as directed by the Engineer-in-Charge including hire and operational charges all T & P and all other contingent charges necessary including cost of seigniorage charges on all materials etc., complete and as per MORTH specification No.504 (4th Revision) and as directed by the departmental officer in charge of the work but excluding seigniorage charges.

Providing and laying Bituminous concrete with 40-60 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading -II, premixed with bituminous binder @ 5.4 to 5.6 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects, etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges.