Inviting e-tender for the Interior Furnishing Works at Thiruvananthapuram

Amount

e-tender for the Interior Furnishing Works at Thiruvananthapuram For more details refer tender documents

Executive High back Chair for Department Heads The seat cushion of the chair should be made up of 50mm thick High Density of 45±2 Kg/m3 polyurethane mould and back cushion should be made up of 38mm thick High Density 33±2 Kg/m3. The polyurethane foam shall be as per manufacturer’s specification. The hardness of foam shall be 20 kg on hampden machine and 25% compression and it should be covered with fabric as per manufacturer’s shade card. The arms of the chairs should be black . The Gas lift mechanism should be tested as per Standards. The pedestal should be five legged injection moulded in black nylon and fitted with 5 nos twin wheel castors. The castors of the chairs should be glass filled, twin wheel castors and tested to perform 1,00,000 cycles with 225 lbs Load. Note -The back and base of chair should be supplied with fabricupholstered .Overall Height of chair should be minimum 1200 mm (Inclusiveof maximum adjustment of gas lift mechanism)

Semi Executive Visitors Chair Providing and Supplying of Fixed Base Cushion chair for Visitors. The back chairs for Visitors shall be low back chair. The arms of the chairs should be black. The chair shall be supplied with PU moulded seat and back. The under structure should be made of tubular cantilever type MS ERW tube black powder coated. The chair shall be supplied with fabric of approved make and shade for seat and back. Note -The back and base of the chair should be supplied with fabric upholstered. Overall Height of chair : 750 mm max.

Executive Visitors Chair Providing and Supplying of Fixed Base Cushion chair for Visitors.The back chairs for Visitors shall be low back chair. The arms of the chairs should be black. The chair shall be supplied with PU moulded seat and back. The under structure should be made of tubular cantilever type MS ERW tube black powder coated. The chair shall be supplied with fabric of approved make and shade for seat and back. Note -The back and base of the chair should be supplied with fabric upholstered. Overall Height of chair : 920 mm max.

Dining Chairs Wooden seat with Steel Back

Premium High Back Revolving Chair for CMD, CEO, Secretary Providing and supplying of ergonomically designed fabric upholstered high back revolving chair. The seat cushion of the chair should be made up of 50mm thick High Density of 45±2 Kg/m3 polyurethane mould and back cushion should be made up of 38mm thick High Density 33±2 Kg/m3. The polyurethane foam shall be as per manufacturer’s specification. The hardness of foam shall be 20 kg on hampden machine and 25% compression and it should be covered with fabric as per manufacturer’s shade card. The arms of the chairs should be black. The Gas lift mechanism should be tested as per Standards. The pedestal should be five legged injection moulded in black nylon and fitted with 5 nos twin wheel castors. The castors of the chairs should be glass filled, twin wheel castors and tested to perform 1,00,000 cycles with 225 lbs Load. Note -The back and base of chair should be supplied with black polypropylene fabric upholstered . Overall Height of chair should be minimum 1225 mm (Inclusive of maximum adjustment of gas li?? mechanism)

Premium High Back Revolving Chair for Conference Hall Providing and supplying of ergonomically designed fabric upholstered high back revolving chair. The seat cushion of the chair should be made up of 50mm thick High Density of 45±2 Kg/m3 polyurethane mould and back cushion should be made up of 38mm thick High Density 33±2 Kg/m3. The polyurethane foam shall be as per manufacturer’s specification. The hardness of foam shall be 20 kg on hampden machine and 25% compression and it should be covered with fabric as per manufacturer’s shade card. The arms of the chairs should be black. The Gas lift mechanism should be tested as per Standards. The pedestal should be five legged injection moulded in black nylon and fitted with 5 nos twin wheel castors. The castors of the chairs should be glass filled, twin wheel castors and tested to perform 1,00,000 cycles with 225 lbs Load. Note -The back and base of chair should be supplied with black polypropylene fabric upholstered . Overall Height of chair should be minimum 1225 mm (Inclusive of maximum adjustment of gas li?? mechanism)

Semi Executive High Back Chair for Programme Managers The seat cushion of the chair should be made up of 50mm thick High Density of 45±2 Kg/m3 polyurethane mould and back cushion should be made up of 38mm thick High Density 33±2 Kg/m3. The polyurethane foam shall be as per manufacturer’s specification. The hardness of foam shall be 20 kg on hampden machine and 25% compression and it should be covered with fabric as per manufacturer’s shade card. The arms of the chairs should be black . The Gas lift mechanism should be tested as per Standards. The pedestal should be five legged injection moulded in black nylon and fitted with 5 nos twin wheel castors. The castors of the chairs should be glass filled, twin wheel castors and tested to perform 1,00,000 cycles with 225 lbs Load. Note -The back and base of chair should be supplied with fabric upholstered . Overall Height of chair should be minimum 1100 mm (Inclusive of maximum adjustment of gas lift mechanism)

Semi Executive Medium Back Chairs The seat cushion of the chair should be made up of 50mm thick High Density of 45±2 Kg/m3 polyurethane mould and back cushion should be made up of 38mm thick High Density 33±2 Kg/m3. The polyurethane foam shall be as per manufacturer’s specification. The hardness of foam shall be 20 kg on hampden machine and 25% compression and it should be covered with fabric as per manufacturer’s shade card. The arms of the chairs should be black . The Gas lift mechanism should be tested as per Standards. The pedestal should be five legged injection moulded in black nylon and fitted with 5 nos twin wheel castors. The castors of the chairs should be glass filled, twin wheel castors and tested to perform 1,00,000 cycles with 225 lbs Load. Note -The back and base of chair should be supplied with fabric upholstered . Overall Height of chair should be minimum 1050 mm (Inclusive of maximum adjustment of gas lift mechanism)

Semi Executive Medium Back Revolving Chair for Conference Hall and Board Room The seat cushion of the chair should be made up of 50mm thick High Density of 45±2 Kg/m3 polyurethane mould and back cushion should be made up of 38mm thick High Density 33±2 Kg/m3. The polyurethane foam shall be as per manufacturer’s specification. The hardness of foam shall be 20 kg on hampden machine and 25% compression and it should be covered with fabric as per manufacturer’s shade card. The arms of the chairs should be black .The Gas lift mechanism should be tested as per Standards. The pedestal should be five legged injection moulded in black nylon and fitted with 5 nos twin wheel castors. The castors of the chairs should be glass filled, twin wheel castors and tested to perform 1,00,000 cycles with 225 lbs Load. Note -The back and base of chair should be supplied with fabric upholstered . Overall Height of chair should be minimum 1050 mm (Inclusive of maximum adjustment of gas lift mechanism)

Executive Visitors Chair Providing and Supplying of Fixed Base Cushion chair for Visitors. The back chairs for Visitors shall be low back chair. The arms of the chairs should be black. The chair shall be supplied with PU moulded seat and back. The under structure should be made of tubular cantilever type MS ERW tube black powder coated. The chair shall be supplied with fabric of approved make and shade for seat and back. Note -The back and base of the chair should be supplied with fabric upholstered . Overall Height of chair : 920 mm max.

Semi Executive Low Back Chairs (Peon) The seat cushion of the chair should be made up of 50mm thick High Density of 45±2 Kg/m3 polyurethane mould and back cushion should be made up of 38mm thick High Density 33±2 Kg/m3. The polyurethane foam shall be as per manufacturer’s specification. The hardness of foam shall be 20 kg on hampden machine and 25% compression and it should be covered with fabric as per manufacturer’s shade card. The arms of the chairs should be black . The Gas lift mechanism should be tested as per Standards. The pedestal should be five legged injection moulded in black nylon and fitted with 5 nos twin wheel castors. The castors of the chairs should be glass filled, twin wheel castors and tested to perform 1,00,000 cycles with 225 lbs Load. Note -The back and base of chair should be supplied with fabric upholstered .Overall Height of chair should be minimum 970 mm (Inclusive of maximum adjustment of gas lift mechanism)

Sofa (3+1+1) Supplying sofa of specified size and dimension . Seat rest ,Back rest and Side arms assembly consists of a fabricated inner frame assembly with moulded polyurethane foam having density = 45 ± 2 Kg./cm which provides strength as well as comfort to the sofa. The complete moulded backrest assembly is covered with a replaceable fabric/ foam leather upholstery cover.

Pantry Chair Wooden seat with Steel Back

Semi Executive Medium Back Chairs (Secretary) The seat cushion of the chair should be made up of 50mm thick High Density of 45±2 Kg/m3 polyurethane mould and back cushion should be made up of 38mm thick High Density 33±2 Kg/m3. The polyurethane foam shall be as per manufacturer’s specification. The hardness of foam shall be 20 kg on hampden machine and 25% compression and it should be covered with fabric as per manufacturer’s shade card. The arms of the chairs should be black . The Gas lift mechanism should be tested as per Standards. The pedestal should be five legged injection moulded in black nylon and fitted with 5 nos twin wheel castors. The castors of the chairs should be glass filled, twin wheel castors and tested to perform 1,00,000 cycles with 225 lbs Load. Note -The back and base of chair should be supplied with fabric upholstered . Overall Height of chair should be minimum 1050 mm (Inclusive of maximum adjustment of gas lift mechanism)

Vertical Blinds Providing and fixing window blind shade system shall be a chain operated roller system utilizing a bidirectional, wrap spring clutch. The system must be capable of smoothly raising and lowering the blind to any desired height, and the material coiling round a top tube on raising, a mechanism incorporated in a top tube holds the shade at any required height with no slippage. Clutch size is adjusted based on the weight of fabric. The fabric shall be attached to the tube with an adhesive strip. A minimum of one turn of fabric must be placed on the roller before the working section of fabric starts. It has long been known as an efficient means of sun protection and light exclusion.(Approximate area)

12mm Glass Partitions & Doors with 12mm clear glass Providing and fixing glass partition and doors made out of 12mm thick clear glass, on powder coated aluminum angle of size 25mmx25mm with silicon- 789/equivalent. and providing glass door with brush steel finished stainless steel handles and multi lock and key, as per design.((Approximate area)

Toilet Sanitary Fitting, Accessories, water closet and Health Faucet. Providing and fixing for 9 Toilet With water closet, health faucet, sanitary fittings and plumbling works

Wash Area Fittings & Accessories Providing and fixing below counter wash basin on black granite slab with pillar cock, stop cock, mirror and standard accessories of jaguar or equivalent. (as per design)

Partion Walls & Fixed Seperators Providing and fixing wall made with 2" sandwich board with MS channel, gap filling, pointing and all necessary labour and materials.(Approximate area)

Floor & Wall Tile Laying Providing and fixing vitrified / ceramic tiles Under no circumstances warped, cracked or chipped tiles shall be used. The tiles shall be laid in maximum thickness of 2mm tile gum and shall be jointed and pointed in the relevant colour joint filler, according to the design.(Approximate area)

False Ceiling Providing and fixing gypsum board false ceiling with cove lighting. All internal G.I frame "True Steel Channel'' by fixing intermediate in 3 feet distance and ceiling section in 1.5 feet distance support with angle 3 feet distance. All Gypsum Boards will be 12.5mm thick for false ceiling, drops and cover and12.5 mm thick. Cut out for light fixtures to be accounted and False ceiling levels as indicated in reflected ceiling layout. (Approximate area)

Electrification Supply and fixing General electrical wiring for light, tube, fan, A/C, EB Socket and other electrical point with 1sqmm cable, PVC conduits, modular switch, modular plate, surface/ metel box, and all related materials with labour cost, as per design.

Light Fittings Supply and fixing of light fittings (LED Hanging light, LED panel light, LED strip light) with it's accessories, ss screw, and labour cost, as per design.

Networking Providing and fixing network with I/O switch, cable face plate key stones, 24 port switch, rack patch panels, box, patch codes, and all necessary materials with labour cost, as per design.

Painting Supply and application of necessary materials by preparation of wall and ceiling surfaces to be painted by removing all loose material/ paint, dust, stain etc. and providing putty, primer, and 2 coats of emulsion paint, as per design.(Approximate area)

Masonry Works Providing necessary walls, flooring, kerb sides, concrete, plastering etc. including demolition of unwanted existing masonry and concrete works.

Cleaning Upon completion of the work all the areas should be cleaned. All floors, doors, windows, surface, etc. shall be cleaned down in a manner.All rubbish due to any reason shall be removed from the site.

Loading,Unloading,Leading,Lifting

Transportation

A/C supply of 0.75 TR split air conditioner having 3 star rating with copper condenser. (14 nos.) supply of 1.5 TR split air conditioner having 3 star rating with copper condenser. (5 nos.) supply of 2 TR cassette type split air conditioner having 3 star rating with copper condenser. (3 nos.)supply of 3 TR cassette type split air conditioner having 3 star rating with copper condenser. (4 nos.) supply of V guard make VG 400 stabilizer (19 nos.) supply of V guard make VG 500 stabilizer (3 nos.) Erection charges for split A/C units (19 nos.) Erection charges for cassette A/C units (7 nos.)

vavatraders