Providing and fixing of aluminum partition at DH Ganderbal

Providing and fixing of aluminum partition at DH Ganderbal

Providing and fixing aluminum work for doors,windows,ventilators,and partitions with extruded built up standard tubular section\appropriate Z section and other sections of approved make conforming to IS:733 and IS:1285,fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions,I,e.at top ,bottom and sides with required EPDM rubber\neoprene gasket etd. Aluminum sections shall be smooth, rust free, strainght, mitred and jointed mechanically wherever required including cleat angle, anuminium snap beading for glazing\paneling,C.P.brass00 \stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately).

For fixed portion:Anodised aluminum(anodized transparent or dyed to required shade according to IS1868,Minium anodic coating of grade AC 15)

For shutters of doors ,windows and ventilators including providing and fixing hinges\pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber\neoprene gasket required(Fittings shall be paid for separately) Anodized aluminum (anodized transparent or dyed to required shade according to IS;1868 ,Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminum door,window,ventilator shutters and partitions etc,with EPDM rubber\neoprene gasket etc.complete as per the architectural drawing and the directions of engineer-in-charge.(Cost of aluminum snap beading shall be paid in basic item):with float glass panes of 4.0 mm thickness(weight not less than 10 KG/sqm)

Providing and fixing pre-laminated medium density fiber board exterior grade (Grade I)IS;14587;1998 marked, to frame, backing or studding with screws etc.complete(Frames, backing or studding to be paid separately):pre-laminated with decorative lamination on both side exterior grade _IMDF board 12 mm thick confirming to IS;14587

Providing and fixing bright finished brass handles with screws etc .complete ;125 mm

Providing and fixing aluminum tower bolts,ISI marked ,anodized(anodic coating not less than grade AC 10 as per IS;1868)transparent or dyed to required color or shade, with necessary screws etc.complete:300x10 mm each 117.65

Providing and fixing bright finished 100 mm mortice lock with 6 lavers without 100 mm mortise lock with 6 levers without pair of handles of approved quality for aluminum door,with necessary screws etc completed as per direction of Engineer-in charge.

Finishing wall with 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489;2004,Alkali and fungal resistance, dirt resistance exterior paint of required shade(company,depot,tinted)with silicon additives including necessary scaffolding at any height, scraping of moss, blister etc.thoroughly from exterior surface of wall by the use of scraper, wire brush etc complete. New or old work(two or more coats applied @1.43 litre/10 sqm over and including priming coat of exterior primer applied @0.90 liter/10 sqm.Make:ICI weathershild Max/Asian paint Apex Ultima or equivalent.

Applying priming coat(one or more coat) with ready mixed red Oxide\zinc chromate primer of approved brand and manufacture on steel galvanized iron\steel work, including removing of rust, old paints and smoothening of surfaces by sand papering etc all complete.

Painting with synthetic enamel paint of approved brand and manufacture(ICI Deluxe 5 1 or Equivalent )to give an even shade: Two or more coats on wood work(hard and soft wood),steel works etc.

Providing and applying white cement based putty of average thickness 1 MM,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth all complete including removing of old\dilapidated putty wherever necessary.

Applying priming coats(one or more coat)with water thinnable cement primer of approved brand and manufacture on wall surface, having low VOC(Volatile Organic Compound less than 50 grams/litre)content including scraping and preparing the surface thoroughly ,removing of dust etc all complete as per manufacturer’s specification and direction of the EIC(At any Floor).Make:Asian Paints/ICI Deluxe/Berger .

Wall painting with premium acrylic emulsion paint of interior grade, having VOC(Volatile Organic Compound)content less than 50 grams/litre of approved brand and manufacture(Asian Paints Apcolite/ICI Dulux Super Clean/Berger Easy clean),applying two or more coats to achieve even shade and color as per direction and satisfaction of EIC.

Plain and reinforced concrete and allied works 1) Ordinary cement concreate mix(1:2:4)with graded stone 20 mm size rate in per cum.

2) (1:3:6) 1 cement is to :3 coarse sand 6 graded stone aggregate 40 mm normal size(rate in per cum.

3) Plaster repairing works in 1:4 mix 1 cement :4 course sand per suq meter

M/S TARIQ AHMAD DAR

A H TRADERS

M/S BILAL AHMAD WANI

M/S NASEER AHMED RATHER

M/S GHULAM MOHAMMAD WANI

SYED MUNEEB-UL-MUKHTAR QADRI