Servicing connection in fire pump and HT cable work of 100 bedded COVID ward at Ranaghat SDH

Amount

Supplying & delivery of HT 11 KV (E) Grade 3 core 240 sq. mm circular Armored Al. XLPE (E) insulated with extruded semi conducting compound in combination with copper tape, inner sheath of PVC tape armored & overall PVC sheathed cable (Make: Gloster / Universal / Polycab / Havells) confirming to IS:7098 / part - II / 2011 with latest amendments. [ NS ]

Laying of one cable above 150 sqmm and upto 300 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand [ F3 / 4(b)]

Supplying & fixing of 3 Core 240 sq. mm 11KV XLPE (E) cable termination heat shrinkable end kits 3M (M-seal) make including S&F heat shrinkable 11KV XLPE (E) cable termination end kits and other necessary materials complete for Indoor & Outdoor termination .also including socketing long barrel type 3 M (M-seal) / Dowels make by crimping method complete including S & F 11 KV HT tape & necessary materials also maintain proper method of 11 KV HT kit fixing. (NS )

Supply of 1.1 kV Gr. 4 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cable [Make Gloster/Polycab/ Havells] of following sizes -- 120 sq. mm (NS) [From New Sub-Station Main Panel to Fire Hydrent LT Panel ]

Laying of one cable above 150 sqmm and upto 300 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand [ F3 / 4(a)]

Laying only Cable above 4 core 50 sq. mm but not exceeding 4 core 400 sq. mm through existing RCC/ Hume/GI Pipe/open masonry trench. [3 (b)/F-2 ]

Laying of following sizes 4 core Armoured/Aluminum conductor cable on wall/surface including S & F MS clamps with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting 90-150 / 185 sq. mm [ F 1 / 2 (e)]

Laying of following sizes 4 core Armoured/Aluminum conductor cable as below after cutting floor/pavement/wall and making holes incl. embedding the cables at an average depth as below and nending good the damages to original finish incl. removing the rubbish 185 sq. mm at an average depth of 100 mm in floor/pavement/wall etc. [ F 3 / 5 (iii)]

Supplying and fixing compression type gland complete with brass gland , brass ring & rubber ring for dust & moisture proof entry of XLPE / PVC armoured cables as below Dowels make gland as per GS 4 Core 120 Sq.mm [7(c)/F4 ]

Finishing of the XLPE / PVC insulated armoured cable ends by crimping method incl. supplying & fixing solder less socket ( DOWELS ) make , tapes , anticorrosive paste & jointing materials as per GS. 4 Core120 sq.mm [ 8(b)/ F5 ]

Supplying & fixing medium gauge GI pipe (ISI - Medium) protection with necessary fittings and jointing materials as required . 80 mm dia [F 6 / 11 f ]

M/S. GHOSH ENTERPRISE

GEM ENGINEERS CO-OP SOCIETY LTD