SPL REPAIRS TO AMMUNITION WORKSHOP P 208 FIRE STATION P 203 AT NAD BHEEMUNIPATNAM PROVN OF COMPOUND WALL AROUND CERTAIN GOVT MARRIED ACCNS IN PH II AT NAVAL STN AND CERTAIN MINOR WORKS AT INS KALINGA KARNA AND NAD BHEEMUNIPATNAM VISAKHAPATNAM

Amount

Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed by the Engineer-in-Charge.

Removing excavated material from site to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre from the starting point complete all as specified.

M&L hard core of broken stone or boulders of gauge n.exc 63mm deposited, spread, levelled in layers n.exc 15cm thick watered and well rammed to true surface complete all as specified and as directed.

M & L 75mm thick cement concrete 1:2:4 type B-1 (using 40 mm graded stone aggregate) as in flooring/ hard standing and finishing the concrete surfaces even and smooth without using extra cement complete all as specified and as directed.

S&F of Precast RCC benches with Back rest and without arms of overall size 1.5m x 0.6m x 1.0m height & specifications are as follows :- (a) SEATS : (i) 02 in no Planks of size 1.50m in length, 100mm in Width and 50mm thick. (ii) 01 in no planks of size 1.5m in length, 210mm in width and 50mm thick (b) BACK REST : (i) 03 in no Planks of size 1.50m in length, 100mm in Width and 50mm thick. (c) LEGS : (i) 02 in no Planks of size 0.6m in width, 1.0m in height and 100mm thick, including two coats of plastic emulsion over a coat of primer complete all as specified and as directed by Engr-in-Charge.

Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, cable etc. n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil complete all as specified and as directed.

M & L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M&L for brickwork with subclass 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge.

M & L providing cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as cast in situ in lintels upto 1.5m span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets, railing upto 60 cm in height, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for rendering 15mm thick with CM 1:4 on fair faces of brick work or concrete surfaces, complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint complete all as specified and as directed by the Engineer-in-Charge.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified.

Removing excavated materials (soil) exc 500m and n. exc 1.5 Km and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed

Excavating in post holes (or similar holes) each n.exc 0.5 Cu.m getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and getting out in any type of soil complete all as specified and as directed.

M&L for PCC 1:2:4 type B2 (Using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed by the Engineer-in-Charge.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St-240 complete all as specified and as directed.

S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality-A complete all as specified and as directed by the Engineer-in-Charge.

S&F 12mm dia. mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n. exc. 5cm long complete all as specified and directed by the Engineer-in-Charge.

M&L for preparation of new or previously untreated steel and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by the Engineer-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard/ dense soil complete all as specified and as directed.

M & L Reinforced Cement Concrete type A-1, 1:1 1/2:3 (20mm graded granite stone agg) as in foundations, including rafts, footings, plinth beams etc and mass concrete complete all as specified and as directed.

All as per Srl item No. 22 here-in-above but for columns, pillars, piers, posts and struts etc complete all as specified and as directed.

Use and waste of form work to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sided and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surface of concrete completed all as specified and as directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished concrete surface complete all as specified and as directed.

M&L TMT bars 10mm dia and over, as reinforcement. cut to length, bent to shape required including cranking bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and as directed.

M&L TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length , bent to shape required including cranking bending hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips complete all as specified.

S&F framed work such as grills, grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc for ornamental and intricate design complete all as specified and as directed.

M&L Brick work with fly ash bricks straight or curved on plan exc 6.0 mtr mean radius built in cement mortar (1:6) complete all as specified and as directed

M&L for rendering 10mm thick with CM 1:4 on fair faces of brick work or concrete surfaces, finished even and fair without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

M&L for applying two coats of weather shield exterior emulsion paint over a coat of primer including preparation of wall surfaces complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed

Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc built in cement mortar complete all as specified and as directed by the Engineer-in-Charge.

Demolition of Brick work or stone boulders masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed

Demolition of old un-reinforced cement concrete in ground floor and pavings not exceeding 15cm thick (un reinforced) and removing debris from site of work complete all as specified and as directed.

Dismantling of wall and ceiling boards (fiber, pulp insulation etc) or insulation board /slab/blankets any thickness including cover fillets, including removing of dismantled material from work site all as directed.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) each area exc 1.5 sqm but n.exc 4.00 sqm each complete all as specified and as directed.

Taking down chowkats or frame shutter (without taking off shutter from the frame) n.exc 1.5 m each complete all as specified and as directed.

S&F solid PVC door frames of size 100mm X 60mm made out of 5 mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube complete all as specified & directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90*) used instead of exposed portion of PVC sheet beading and the panelling of wood grain printed PVC sheet to be fitted in the MS frame, welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent complete all as specified and directed.

S&F 35mm thick flush shutters solid core construction with block board core and plywood face panels with both side covered with decorative face veneer complete all as specified and as directed.

S&F 2nd class hard wood (well seasoned) plain, solid, straight, chowkats and frame,wrought,framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified.

M & L applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces over 10 cm width or girth, complete all as specified and as directed.

M & L applying one coat of synthetic enamel paint including preparation of old painted wood and wood based surfaces over 10 cm width or girth, complete all as specified and as directed.

S&F 125mm size MS butt hinges medium weight cold rolled fixed to frame complete all as directed.

S&F 100mm size stainless steel butt hinges medium weight cold rolled fixed to frame complete all as specified and as directed.

S & F 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as directed.

S & F 125 mm size aluminium handles, cast type, anodised complete all as directed.

S & F 100 mm long, aluminium, anodised, barrel tower bolts of extruded section complete all as directed.

S & F 200 mm long, aluminium, anodised, barrel tower bolts of extruded section complete all as directed.

S & F 150mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium allow complete all as specified and as directed

S & F 300mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium allow complete all as specified and as directed

S&F aluminium extruded section door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000mm in width complete all as specified and as directed.

M & L 25mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub base of floors complete all as specified and as directed.

M&L 75mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed.

M&L for non skid/matt finish ceramic tiles 7 to 8mm thick area of each tile exc. 0.18 Sq.m. but n. exc. 0.38 Sq.m., in floors etc. set and jointed in neat slurry and pointed in white or coloured cement to match for joint free over screed bed or bedding layer 15mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed by the Engineer-in-Charge.

M&L for non skid/matt finish ceramic tiles 7 to 8mm thick area of each tile exc. 0.18 Sq.m. but n. exc. 0.38 Sq.m., in vertical surface like skirtings dado etc. set and jointed in neat slurry and pointed in white or coloured cement to match for joint free over backing coat of mortar 10mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed by the Engineer-in-Charge.

M & L for glazed ceramic coloured tiles 350 x 250 or 450 x 350 x 7 mm thick (Ist quality), as in vertical surface such as skirting/dado set in neat cement slurry and pointed in white coloured cement to match the surface over and including 10 mm thick backing coat of cement mortar 1:4 complete all as specified and as directed.

M & L Brick Work in with fly ash Bricks straight or curved on plan to any radius in half brick thick wall, built in Cement Mortar 1:4 complete all as specified and as directed.

M&L for rendering 10mm thick with CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth with using extra cement complete all as specified and as directed by the Engineer-in-Charge.

M&L for providing and fixing gypsum board 12mm thick in false ceiling concealed type fixed with screw in GI framework alongwith hanging bars and applying two coats of oil bound distemper over one coat of 2 mm thick putty over a coat of primer complete all as specified and as directed.

S & F anodised powder coated aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc, (minimum thickness of powder coating 50 micron) complete all as specified and as directed.

S & F powder coated coloured anodised aluminium window and ventilator shutters, sliding type without sash bar, including necessary jointing cleats, glazing clips, rubber packing aluminum snap beading, screws anodised aluminium fittings such as suitable handle (1 No.) (thickness of powder coating 50micron) complete all as specified and as directed.

S & F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm each pane complete all as specified and as directed

S&F aluminium XPM wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

S&F anodised colour aluminium grill of design No. DG-117, 10 mm thick fixed with and including 'F' sections complete all as specified and as directed. Make. DECOGRILLE or equivalent make as approved by GE

S&F 4mm thick figured glass & glazing with oil putty including steel pin as in steel frame, in square n-exc. 0.5 sqm in each pane complete all as specified.

M&L applying two coats of white wash including complete removal of existing surface of ceiling complete all as specified and as directed.

M&L for complete removal of existing treatment on internal surfaces of walls and applying two coats of distemper oil emulsion over a coat of 2 mm thick putty over and including one coat of primer as priming coat complete all as specified and as directed.

M&L for applying two coats of weather shield exterior emulsion paint over a coat of primer including complete removal of existing treatment on external wall surfaces complete all as specified and as directed.

S&F in repairs vitreous China wash down water closet pan (Pedestal pattern) white including fixing bolt, low level flushing cistern of 10 ltr capacity and seat cover complete all as specified and as directed.

S&F in repairs vitreous china urinals, half stall type, white (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (excluding supply of flushing cistern and flush pipe) complete all as specified and as directed.

S&F stainless steel tubular towel rail 20mm dia, D type 600mm long between flanges of brass chromium plated fixed with and including CP brass screws complete all as specified and as directed

S & F soap dish, chromium plated, fixed to wall with plugs with chromium plated screws complete all as specified and directed

S & F 15 mm dia two way bib cock chromium plated fancy type complete all as specified and as directed.

S & F 15 mm dia bib cock chromium plated screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed.

S&F 15mm bore Health faucet with 1.5m long easy flex tube in chrome finish and wall hook, complete all as specified and as directed

S & F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S & F in repair 15mm dia stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed

S & F in repair 40mm PVC (SWR) pipes single socketed in any length with rubber ring jointed to wall complete all as specified and directed.

Taking up or down 25mm bore old steel water tubings and fittings etc complete all as specified and as directed.

Taking up or down 20mm bore old steel water tubings and fittings etc complete all as specified and as directed.

Taking up or down 15mm bore old steel water tubings and fittings etc complete all as specified and as directed.

S&F three layer PP-R (Polypropylene random copolymer) pipes of inner dia 15 mm bore pipes SDR 7.4 & SDR 11 UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.

S&F in repair three layer PP-R (Polypropylene random copolymer) pipes of inner dia 20 mm bore pipes SDR 7.4 & SDR 11 UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.

S&F three layer PP-R (Polypropylene random copolymer) pipes of inner dia 25 mm bore pipes SDR 7.4 & SDR 11 UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.

S & F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) (conforming to IS 12701-1996) multi layer hoisted and fixed in position 750 ltrs capacity complete all as specified and as directed.

S&F PP-R ball valves (brass insert) suitable for 25 mm bore PP-R pipe including connection & testing complete all as specified and as directed.

S&F in repair PP-R gate valves (brass insert) suitable for 25mm bore PP-R pipe including connection & testing complete all as specified and as directed.

S & F 75mm PVC (SWR) multi floor trap, with grating including jointing with solvent cement complete all as specified and as directed.

S & F in repairs 110mm PVC (SWR) pipes single socketed in any length with rubber ring jointed to wall complete all as specified and directed.

S & F in repairs 75mm PVC (SWR) pipes single socketed in any length with rubber ring jointed to wall complete all as specified and directed.

S&F 25mm bore dia curtain rod stainless steel for window, door opening etc complete all as directed.

S&F fancy type CP knob for fixing curtain rod complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and as directed.

Demolition of chajja/ roof drop of thin RCC section of depth 10 to 20 cm, thick 7 to 10 cm and finishing the concrete surfaces with CM 1:3 complete all as specified and as directed.

Removing debris to a distance of 2 Km including loading and dumping / levelling at the destination complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing unserviceable materials from site of work complete all as specified and as directed.

M&L 50 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floors laid in panels and finishing top surface of cement concrete even and smooth without using extra cement including fixing only glass 3mm thick glass dividing strips 28mm wide inserted in position to confirm to design complete all as specified and as directed.

M & L for Non skid/ matt finish ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) of size 600 mm x 600 mm or more as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 15 mm thick screed bed of cement mortar 1:6 complete all as specified and as directed.

M & L for Non skid/ matt finish ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) of size 400 mm x 400 mm or more as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 15 mm thick screed bed of cement mortar 1:6 complete all as specified and as directed.

M&L machine cut kota stone slab 20 to 25mm thick as in floor laid over and including 15 mm thick cement screed bedding of CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.

M&L machine cut kota stone slab 20 to 25mm thick as in riser of steps,skirting,dado and pillar laid over and including 10 mm thick cement screed bedding of CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.

S&F granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillar, window, cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dist with admixture or pigment to match with shade of granite over a screed bed of 20 mm thick in CM 1:4 complete all as specified and as directed.

M&L for brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge.

M & L Precast Reinforced Cement Concrete type B 1, 1:2:4 (20mm graded stone agg) as in for manhole/ drain covers etc set in cement mortar 1:4 finishing the exposed faces finished even and smooth without using extra cement complete all as specified and as directed. Note : Reinforcement shall be measured and paid separately.

Use and waste of formwork to sides and soffits of drops, facia, chajja, parapets and similar work for fair finished surfaces complete all as specified and as directed.

M&L TMT bar 6 mm to 8 mm dia and over cut to length , bent to shape required including cranking ,bending hooking ends spirally and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and as directed.

S&F solid PVC door frames of size 100mm X 60mm made out of wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube complete all as specified & directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90*) used instead of exposed portion of PVC sheet beading and the panelling of wood grain printed PVC sheet to be fitted in the MS frame, welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent complete all as specified and directed.

S & F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door, hinges anodised aluminium snap beading, screws, with locking arrangements etc (thickness of powder coating not less than 50 micron) complete all as specified and as directed.

M&L 12mm thick prelaminated board interior grade prelaminated both side complete all as specified and as directed.

S & F 150 mm long, aluminium, anodised, barrel tower bolts of extruded section complete all as directed.

S & F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm each pane complete all as specified and as directed

M&L rendering 5mm thick in cement mortar 1:3 in ceiling including 3 mm thick wall care putty complete all as specified.

M&L applying three coats of white wash including preparation of new surface of ceiling complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 2 mm thick putty over and including one coat of primer as priming coat complete all as specified and as directed.

M&L for complete removal of existing treatment on walls and applying two coats of weather shield exterior emulsion paint over a coat of primer including preparation of wall surfaces complete all as specified and as directed.

M&L for complete removal and applying three coats of white wash on ceiling complete all as specified and as directed.

S&F half pedestal wash basin vitreous China flat back/ angle back white of size 550x400mm including a pair of bracket cutting for and pinning in ends of brackets or erecting stand including 32mm dia CP waste coupling, PVC waste pipe 32mm dia of standard length complete all as specified and as directed.

S&F grating doom 125mm dia of PTMT approved quality (minimum weight 40 gms) complete all as specified.

S&F 15 mm dia brass chromium plated pillar tap, with capstan head, screwed down pressure with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, screwed for iron pipe complete all as specified and as directed.

S & F in repair PVC (SWR) gully trap 110mm dia setting and jointing with solvent cement complete all as specified.

S & F in repair PVC (SWR) 'S' trap 110mm dia complete all as specified.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, size of mesh 12 mm complete all as specified and as directed.

Supply only mild steel medium grade shaft pipe of 50 mm dia as required for rolling shutter complete all as specified and as directed.

Supply only ball bearing for 50 mm dia of approved make complete all as specified and as directed.

Supply only guide channel, made out of MS sheet 3.15 mm thick and 75 mm wide complete all as specified and as directed.

S & F steel rolling shutter 1.25 mm thick without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete gear operated type with bevel gear box and crank handle complete all as specified and as directed by Engr-in-Charge

Taking down roof WPT/ plaster of any description

M&L for brushing neat cement slurry with 3.0 Kg of cement per sqm plain cement concrete complete all as specified and directed.

M & L 25mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in sub base of floors complete all as specified and as directed.

M&L 10 mm thick rendering on fair faces of brick/concrete surfaces in cement mortar 1:4, finished fair and smooth including mixing WPC as per manufacturer instruction complete all as specified. (Note :- WPC will be measured and paid separately under appropriate item as supply only).

Supply and laying 3mm thick APP based polymeric membrane of approved manufacturer with weight not less than 3.0 Kgs per Sqm reinforced with non-woven polyester fabric weight not less than 150gms per Sqm, laid on primed surface by forced application complete all as specified and applying a coat of solar reflective bituminous aluminium paint complete all as specified.

Supply only integral water proofing conforming to IS-2645-2003 complete all as specified.

M & L providing cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) as in coping of poles including necessary formwork complete all as specified and as directed.

S & F in repairs PVC connection 15 mm Size with PTMT nuts of length 600 mm complete all as specified and as directed

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, utility light fittings and lamp holders etc removing materials from site and making good disturbed surfaces of walls, roof and floors, etc as per existing specifications complete all as specified and as directed.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixture such as switches, ceiling roses, lamp holders, sockets, ceiling fittings, bulk head fittings, tube light fittings and fan regulators etc for reuse at site complete all as specified and as directed. (Note : to be measured only when found serviceable in all respect complete for reuse)

M&L for concealed point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLS PVC insulated and unsheathed 1100 V grade multi stranded copper conductor single core cable drawn through existing/ new concealed conduit of adequate size with all fittings and accessories including one run of FRLS PVC insulated and unsheathed single core multi stranded copper conductor cable of size 1.5 Sqmm as earth continuity conductor to common earth and earth dolly including new pressed steel sunken boxes readily available (having thickness not less than 1.22 mm for boxes upto a size of 200 mm x 300 mm and beyond that the wall thickness shall not be less than 1.63 mm) concealed type with 3 mm thick bakelite sheet cover for mounting switches, sockets, fan regulator etc including testing complete all as specified and as directed for the following :- Item continued as 141 to 145

All as per Srl Item No. 140 here-in-above but for One light point controlled by one, one way switch.

All as per Srl Item No. 140 here-in-above but for One E/ fan point controlled by one, one way switch and regulator.

All as per Srl Item No. 140 here-in-above but for One switch socket outlet point 3 pin 5 A on independent board.

All as per Srl Item No. 140 here-in-above but for One switch socket outlet point 5 A on same board with other switches

All as per Srl Item No. 140 here-in-above but for one switch socket out let 3 pin & 5 pin 16 Amps on independent board with 4.0 Sqmm cable and 4.0 Sqmm earth wire.

M&L for concealed Sub main wiring with two run of 4.00 Sqmm (nominal cross-sectional area) FRLS PVC insulated and unsheathed 1100 V grade multi stranded copper conductor single core cable drawn through and including PVC medium grade conduit of 25 mm dia with all fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLS PVC insulated and unsheathed single core multi stranded copper conductor cable of size 4.00 Sqmm as earth continuity conductor connected to common earth and earth dolly for main DB to sub DB including cutting chases pinning in making good to facing and pointing in using cement mortar 1:3 to the ends with taking down old unserviceable sub main wiring and making good the disturbed surfaces complete all as specified and as directed. Note : Two runs of 4 sqmm conductor for main and one run of 4 sqmm conductor as earth wire with PVC conduit shall be measured as one unit length.

M&L switch socket outlet multipurpose 3 pin 15 Amps and one 3 pin 5 Amps controlled by and including one 15 Amp switch flush type 240 Volts complete all as specified and as directed.

S & F Switch Piano flush button single pole one way 5 Amp, 240 volt , complete all as specified and as directed.

Fixing only Switch flush button single pole one way 5 Amp, 240 volt , complete all as specified and as directed. (Note : Material obtained from Srl item No. 139 here in before shall be used)

S&F ceiling rose, surfaces bakelite 65x50 mm three terminal complete all as specified and as directed.

Fixing only ceiling rose, surfaces bakelite three terminal complete all as specified and as directed. (Note : Material obtained from Srl item No. 139 here in before shall be used)

S&F electronic deluxe rotary type fan regulator step type complete all as specified and as directed.

S & F Switch flush button single pole two way 5 Amp, 240 volt , complete all as specified and as directed.

S&F of MCCB, DB, TPN, 4-ways, DOUBLE DOOR, IP-43, Ik-09, 415 volt with metal door, rated bus bars, earth bar, neutral links complete including blanking plates as required and fixed flush to wall / other surface complete all as specified and as directed.

S&F of MCB, DB, SPN, 8-ways, DOUBLE DOOR, IP-43, Ik-09, 240 volt with metal door, rated bus bars, earth bar, neutral links complete including blanking plates as required and fixed flush to wall / other surface complete all as specified and as directed.

Supply and fixing in proper position MCCB four pole of capacity 100 amps, 415 Volts 25kA breaking capacity all as specified and as directed.

S&F MCB, FP, rupturing capacity 10 kA, ‘C’ curve, 63 Amp, 415 volts ISI marked complete all as specified and as directed.

S&F of MCB, rupturing capacity 10 kA, ‘C’ curve, Single Pole, 6 to 32 Amp complete all as specified and as directed.

S&F MCB, DP, rupturing capacity 10 kA, ‘C’ curve, 40 Amp, ISI marked complete all as specified and as directed.

Supply and fixing indoor luminaire decorative batten for wall/ ceiling mounting box type Extruded aluminium housing, PC Diffuser, energy efficient saving LED BATTEN LIGHT 20W, 230 V, 50 HZ, slim integrated design easy install including twin twisted copper conductor flexible wire from ceiling rose to connector all as specified and as directed. [Make:CG Cat Part no.CCS-100-20-65-HL2-DP-NWH or its equivalent as approved by GE]

S&F Recess Mounting luminaries LED down lighter 2' x 2' square of 42 W pearl white colour complete all as specified and as directed.

S&F Lamp holder, insulated body, with back plate suitable for retrofit lamp complete all as specified and as directed.

S&F energy saving & environment friendly long life 25 W, CT >= 5700 K, LED building security light made up of pressure die-cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance not less than IK-07 complete with integrated type, with high efficiency electronic driver, surge suppressor of 5 KV or more and high brightness LEDs, luminaire efficacy > 110 lumens / Watt, power factor >= 0.90 operating range – 140 to 270 V, 50 Hz complete including bracket made out of 25 mm dia medium grade GI pipe of 1 m long duly fixed with MS clamps, nuts, bolts etc. including connecting up with and including twin / three core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply, installation, testing and commissioning of Heavy Duty exhaust fan 300 mm sweep, 1400 RPM, Air Delivery not less than 1900 CMH, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of hold fast for fixing fan and louver shutter with cutting of hole and necessary PCC (1:3:6) and making good the disturbed surfaces (if any) complete all as specified and as directed.

Taking down carefully ceiling fan any sweep and any make after disconnecting the electrical connections dismantling the blades and removing fan including blades for safe custody for reuse and re-assembling the fan complete and refixing the fan in same position including all electrical connections complete all as specified and as directed.

M&L for painting of ceiling fan complete of any sweep/ make with one coat of first quality synthetic enamel paint of approved tint by spray including preparation of old painted surface and removing all dust, oil mark etc and filling cavities with filler materials and writing serial/ MES number as specified (with paint of black colour with each letter/ figure in Block of height n. exc 2 cm) complete all as specified and as directed.

S&F for ceiling fan 230 Volts 1200mm sweep, 5 STAR rating with decorative blades pearl white complete incl fan hook made out of 16 mm dia mild steel hook with all accessories including fan regulator complete all as specified and directed. (Havells Model No. ES 40 or equivalent as approved by GE)

M&L for sand cushioning for protection of underground cable consolidated and compacted with clean dry sand complete all as specified and as directed

Supply, laying, jointing & testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4.0 core in trenches / through GI pipe / fixed along with pole structure etc with all fixing & connecting accessories complete all as specified & as directed.

M&L for brick protection cover to under ground cable with sub-class ‘B’ of size 230 x 113 x 75 mm over burnt bricks laid dry and flat across the axis of cable complete all as specified and as directed by the Engr-in-Charge.

M&L for earthing complete with 7.5m CI pipe 80 mm dia with flanged ends, centrifugally cast, class A, in any length, joints with stainless steel nuts and bolts and sufficient slot upto 2.5 mtr length buried directly and preferably vertically in ground with top flanged ended 2.5 mtr below ground level welded/ connected with GI strip 32 x 6 mm size on the top edge of the flange to bottom edge of the flanged for earthing including filling the pit with charcoal common salt surrounding the earth pipe including drilling 400 mm dia bore any strata of soil to lower the CI pipe complete including necessary excavation and earth work PCC (1:3:6) type C-1 with 50 mm thick precast RCC (1:2:4) type B-1 cover slab and necessary testing on completion complete all as specified and as directed.

M&L switch socket outlet 5 pin 5 Amps flush type including switch flush type 240 Volts complete all as specified and as directed.

Fixing only switch socket outlet 5 Amps flush type complete all as specified and as directed. (Note : Material obtained from Srl item No. 139 here in before shall be used)

S&F Recess Mounting luminaries LED down lighter 2' x 2' square of 36 W pearl white colour complete all as specified and as directed. (Make : CG Cat Part No. CCR-127-36-57-SL-NWH or equivalent as approved by GE)

S&F Lamp holder, insulated body, with back plate suitable for retrofit lamp including 9 watt LED lamp complete all as specified and as directed.

Supply & laying GI tubing light grade of 25 mm bore ISI marked for cable protection laid in trenches/ floor/ wall including necessary all clamp, bolt, nut etc complete all as specified and as directed. (Note : Excavation and earthwork shall be measured and paid separately under relevant item)

S & F steel tubular swaged pole complete with cast iron base plate, finial taper plug, bots, nuts and screws, pole cap type 410 SP – 31 ( 09 metre long ) as per IS 2713-1980 complete all as specified and as directed. (Note :- Excavation, PCC shall be measured and paid separately.)

S&F energy saving & environment friendly long life 45 W, CT >= 5700 K, LED building security light made up of pressure die-cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance not less than IK-07 complete with integrated type, with high efficiency electronic driver, surge suppressor of 5 KV or more and high brightness LEDs, luminaire efficacy > 110 lumens / Watt, power factor >= 0.90 operating range – 140 to 270 V, 50 Hz complete including connecting up with and including twin / three core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. (Make : Havells Model No. ENDURACITYLINEARNEXAGENNSL45WLED757SASYBOPC or equivalent as approved by GE)

S&F HOT moulded (FRP) junction box for street light pole with locking arrangements with IP-65 protection of size 185 x 165 x 60 with 32 Amp 4 way heavy duty terminal block with 10 Amps MCB SP with two steel bracket to fix with pole and aluminium bus bar of rating 200 Amps complete all as specified and as directed.

S&F PVC insulated sheathed multi stranded copper conductor cable of size 1.5 sqmm 3 core complete all as specified and as directed.

M&L for brick protection cover to underground cable with sub-class ‘B’ of size 200 x 100 x 80 mm over burnt bricks laid dry and flat across the axis of cable complete all as specified and as directed by the Engr-in-Charge.

Supply and install hi wall split AC units indoor/ outdoor complete with cordless remote control unit and with inbuilt air ioniser, working on Dual Rotor Inverter Technology, precision cooling technology, having brushless DC motor, high cooling performance and plasma filter with climate control for better indoor air quality with minimum 5 star rating and ISEER 4.56 of capacity 2 ton complete all as specified and as directed by the Engr-in-Charge. Note : The unit rate quoted include the installation of air conditioner and there should be warranty of 10 years on the compressor

S&F voltage stabilizer for automatic operation single phase, 5 KVA capacity, naturally air cooled indoor type & designed for input variation between 130 Volts to 500 Volts with out put voltage 230 Volts with accuracy of +-2.5% and capacity of 5 KVA complete all as specified and as directed by the Engineer-in-Charge. Note : The unit rate quoted include the installation of air stabilizer and there should be warranty of 03 years on the stabilizer on whole

M&L for concealed point wiring with 6.0 Sqmm (nominal cross-sectional area) FRLS PVC insulated and unsheathed 1100 V grade multi stranded copper conductor single core cable drawn through and including new PVC concealed conduit of adequate size with all fittings and accessories including one run of FRLS PVC insulated and unsheathed single core multi stranded copper conductor cable of size 6.0 Sqmm as earth continuity conductor to common earth and earth dolly including concealed metal box for 6/16 Amp socket and AC power socket etc including testing complete all as specified and as directed.

S&F single pole and neutral enclosure with two pin earth plug and socket 240 volts, 50 Hz with 01 Nos of MCB SP 20 Amps 'C' series complete all as specified and as directed.

M&L for concealed Sub main wiring with two run of 6.00 Sqmm (nominal cross-sectional area) FRLS PVC insulated and unsheathed 1100 V grade multi stranded copper conductor single core cable drawn through and including PVC medium grade conduit of suitable size with all fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLS PVC insulated and unsheathed single core multi stranded copper conductor cable of size 6.00 Sqmm as earth continuity conductor connected to common earth and earth dolly complete all as specified and as directed. Note : Two runs of 6 sqmm conductor for main and one run of 6 sqmm conductor as earth wire with PVC conduit shall be measured as one unit length.

S&F decorative ultra slim aluminium square profile 24 watt LED lighting fixture with high lumen output, environmental friendly, energy efficient complete all as specified and as directed. Make : Crompton Cat Part No. LHEXACP7IN1S024 or equivalent as approved by GE

SRI GOWRI ENGINEERING WORKS