REPAIR AND MAINTENANCE OF MECH LAUNDRY BLDGS MES INSTALLATIONS AGE(I) (P) OFFICE COMPLEX AND CERTAIN EW BLDGS UNDER AGE BR I AT IMA DEHRADUN

Amount

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as directed.

Taking down shutter of any description exc 1 sqm and not exc 2 sqm each complete all as directed

Taking down shutter of any description n.exc 1sqm each complete all as directed.

Taking down chowkhats or frame area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as directed.

Taking down shutter of any description exc 1 sqm and not exc 2 sqm each and refixing in same opening complete all as directed

2nd class, hard wood, plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as directed.

PCC 1:3:6 type C1 using 20mm graded stone aggregate as in bed blocks etc for embedding hold fasts complete all as specified and directed

Mild steel works as in bands, straps, hold fast, wall/wind ties, angle cleats and similar small articles etc complete all as specified and directed

Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, and treating ends of posts, back of chowkats, etc with tar or coal tar black paint, area tarred exc 0.1 sqm but not exc 0.5 sqm each complete all as directed.

Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, and treating small articles such as holdfasts, covers, gully trap grating, etc with tar or coal tar black paint, area tarred not exc 0.1 sqm each complete all as directed.

35mm thick flush shutter solid core construciton with partical board core and plywood face panels commercial type on both sides complete all as directed.

35mm thick 2nd class H.W. factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing in SSR complete all as directed.

Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 etc complete all as directed

Steel window box type factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as directed as per drg No TD 088 Sheet 1/17 to 17/17.

Steel ventilator box type factory made with centre hung shutter including hinges and steel peg stay complete with glazing bars dovetailed or welded complete all as directed as per drg No TD 088 Sheet 1/17 to 17/17.

Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing and similar work complete all as directed.

Butt hinges, 100mm long, medium weight, cold rolled, mild steel complete all as specified and directed.

150mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed.

200mm long aluminium anodized, barrel tower bolts of extruded section complete all as directed.

250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed

Floor door stoppers of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in door, overall length of cover plate 150mm complete all as directed.

150mm extruded aluminium alloy handles, fabricated type, fixed in repair complete all as specified and directed.

200mm long aluminium anodized, barrel tower bolts of extruded section fixed in repair complete all as directed.

250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repair complete all as directed

Hacking out old broken glasses any thickness size quality or description from metal/wooden frame including punching or drilling out old glazing pins spring clips etc complete all as specified and directed.

3mm thick sheet glass, ordinary quality and glazing with oil putty or fixed with wooden beads in square and n exc 0.50sqm each pane complete all as specified and directed.

3mm thick frosted glass and glazing with oil putty or fixed with wooden beads in square n. exc 0.50sqm each pane complete all as specified and directed.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples fixed in repairs complete all as specified and directed

Chromium plated towel rail, 60 cm long between flanges fixed in repair complete all as directed. Jaguar ESSCO Cat Part No AEC 1111 or equivalent of Cera/Hindware.

Aluminium drapery rod with wooden finish, decorative including brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum) per RM fixed in repair complete all as directed.

Preparing surfaces holding the members in true position and welding in reparis n. exc 2.5 cm in length, thickness of metal to be welded exc 6 mm but n. exc 9 mm complete all as directed

Taking up or down 15mm dia steel tubing and connections including cleaning for refixing or removal from site complete all as directed.

Taking up or down 20mm dia steel tubing and connections including cleaning for refixing or removal from site complete all as directed.

15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) complete and jointed, tested and fixed to wall and ceiling or laid in floors, complete all as directed.

20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) complete and jointed, tested and fixed to wall and ceiling or laid in floors, complete all as directed.

Fixing only 15mm bore old steel tubing and connections in new or old position (wall, ceiling, floor etc.) with and including all new fittings (ISI Marked) complete all as directed. NOTE: Serviceable pipe retrieved under item No 36 shall be reused.

Fixing only 20mm bore old steel tubing and connections in new or old position (wall, ceiling, floor etc.) with and including all new fittings (ISI Marked) complete all as directed. NOTE: Serviceable pipe retrieved under item No 37 shall be reused.

PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as directed.

Vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket etc fixed in repair complete all as directed.

Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including replacement of 'P' or 'S' CI trap, concrete bedding and making good existing floor fixed in repair complete all as directed.

Vitreous china wash down water closet pedestal pattern white with 100mm CI ‘P’ or ‘S’ trap including seat cover close pattern with flat bottom and connection to trap and to flushing pipe etc fixed in repair complete all as directed.

Vitreous China urinal half stall white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws pointing around urinal back in cement fixed in repair complete all as directed.

PTMT waste coupling(half or full threaded) 32mm dia suitable for wash hand basin (Minimum weight 45gms) fixed in repair complete all as directed.

PVC conections 15mm size with PTMT nuts of 450 mm long fixed in repair complete all as directed

PVC conections 15mm size with PTMT nuts of 600 mm long fixed in repair complete all as directed

Chromium plated angle cock 15mm dia screwed for iron pipe or brass ferrule fixed in repair, complete all as directed. Make - Jaguar ESSCO Cat Part No MQT-526 or eqquivalent of Cera/Hindware

15mm bore short body fancy type bib tap chromium plated fixed in repair complete all as directed. Make- Jaguar ESSCO cat part No MQT-511 or equivalent of Cera/Hindware

PVC internal fitting for low level flushing cistern (including PVC float, symphon etc) suitable for existing flush tanks, fixed in repair complete all as directed

Swivel shower of PTMT any colour (Minimum weight 40gms) with Shower arm 15 mm size, 195mm long fixed in repair complete all as directed

Brass spindle for existing 15mm bib cock, wall mixture, WHB mixture as per sample fixed in repair complete all as directed

15 mm bore Pillar taps rocket type with arreator fixed in repair complete all as specified and directed in repair complete all as directed. Make- Jaguar Essco Cat Part No MQT-507 or equivelent of Hindware/ Cera

15mm bore chromium plated hot & cold centre hole basin mixer with 'U' shape round casted spout with 450mm long braided hoses fixed in repair complete all as directed. Make- Jaguar ESSCO cat part No MQT-516A or equivalent of Cera/Hindware

15mm bore chromium Plated hot & cold wall mixture for mixing hot & cold water with 115mm long bend pipe for connecting to overhead shower (with bush & piston divertor fittings) with aerator etc fixed in repair complete all as directed Make- Jaguar ESSCO cat part No MQT-517B or equivalent of Cera/Hindware

Plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device fixed in repair complete all as directed.

Grating doom 100 mm dia of PTMT(Minimum weight 25gms) fixed in repair complete all as directed.

32mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight -45gms) suitable for wash basin fixed in repair complete all as directed.

PVC waste pipe 32 mm dia suitable for wash basin fixed in repair complete all as directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n' exc. 1.5 m in depth and getting out in any type of soil complete all as specified and directed

110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors or trenches or fixed to walls with MS clamp including taking down existing pipes complete all as specified and directed.

75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors or trenches or fixed to walls with MS clamp including taking down existing pipes complete all as specified and directed.

110mm PVC (SWR) WC connector with lip ring fixed in repair complete all as specified and directed.

PVC (SWR) bends any radius 110mm bore fixed in repair complete all as specified and directed.

PVC (SWR) bends any radius 110mm bore with acess door fixed in repair complete all as specified and directed.

PVC (SWR) bends any radius 75mm bore fixed in repair complete all as specified and directed.

PVC (SWR) bends any radius 75mm bore with acess door fixed in repair complete all as specified and directed.

PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm bore of outlet, fixed in repair complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in soil complete all as specified and directed

Removing surplus excavated soil to a distance n.exc 50 metre & depositing where directed at a level n.exc 1.5 metre above the starting point complete all as specified and directed.

500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed

1000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed

Ball valve 25mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 455 gms complete all as specified and directed.

Ball valve 25mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 455 gms fixed in repair complete all as specified and directed.

Glazed ceramic coloured tiles of size 300 mm x 200 mm x 7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

Machine cut Kota stone slab flooring 20-22 mm thick laid over and including 20mm screed bed in CM 1:6 laid and jointed with grey cement slurry, mixed with pigment to match the shade of slab including grinding,rubbing and polishing mirror finish including dismantling of the existing kota stone flooring of any description etc complete all as specified and directed

Machine cut kota stone slab 18-20mm thick as in vertical surfaces such as riser of steps, skirting/dado, pillar etc over and including 10mm th rendering in cm 1:4 and jointed with grey cement slurry mixed with pigment to match the shade including grinding, rubbing and mirror polishing finish and dismantling of the existing kota stone skirting/dado of any description etc complete all as specified and directed

Machine pressed precast coloured concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade laid, jointed and pointed in grey cement with pigment to match the shade of tile with and including 25mm thick sand cushioning layer including dismantling of existing damaged tile flooring etc complete all as specified and directed

Rubber moulded Chequered cement concrete coloured tiles 25cm x25cmx 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment to match the surface of tiles over and including 20mm thick screed bed in CM 1:6 and dismantling of existing tiles of any description or position complete all as directed.

25mm thick PCC 1:2:4 type B0 using 12.50mm graded crushed stone aggregate as in floors and finishing the concrete surface fair and rough including demolition of old existing concrete complete all as specified and directed.

40mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in floors and finishing the concrete surface even and smooth without using extra cement including demolition of old existing concrete complete all as specified and directed.

Glass Dividing Strips, 3mm Thick, 38mm wide and inserted in position to conform To design complete all as directed.

PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete and sub base of floor etc including demolition of existing old concrete complete all as specified and directed.

100mm thick PCC 1:2:4 type B2 using 40mm graded crushed stone aggregate as in floors and finishing the concrete surface even and smooth without using extra cement including demolition of old existing concrete complete all as specified and directed.

Forming construction joint 30 mm deep x10 mm wide filled with sealing compound Grade 'A ' etc complete all as specified and directed.

75mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork etc and including demolition of existing old cement concrete complete all as specified and directed

PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in surface channel and drains etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete, using extra cement, including forms, moulds, mi-tred/stopped ends etc complete all as specified and directed

Demolition of brick or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

All as per srl item No 94 here in before but except bricks complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Rendering 15mm thick plaster on brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick plaster on faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed

Prepration of plastered surface of wall and applying 1.5mm thick Asian/JK wall/Birla wall care putty as per manufactur instruction complete all as specified and directed.

Pre-cast RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in cover slabs (for manhole, drain etc) and simililar articles with plain faces including necessary form work etc, set in cement mortar 1:4 including demolition of existing RCC cover slab complete all as directed. (Note: Reinforcement shall be measured and paid separately under respective items of BOQ)

Mild Steel work as in posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wires etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting and riveting etc complete all as specified and directed.

Mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Dismantling post of struts (wooden steel or RCC) any section including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Pre-cast RCC 35 mm thick 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in louvers and jallies set in cement motar 1:4 including all mouldings inclduing dismantling existing RCC Jali complete all as specified and directed.

Cleaning of roof slab, chajja including picking sweeping cleaning and washing with water to remove dust including taking down of existing roof treatment and providing water proofing treatment under:- (a) Applying a coat of STAR PROOF MB-602 with help of brushes on the cleaned RCC slab/Chajja. (b) Laying a layer of fiber cloth on wet MB-602 coating and applying another cost of MB-602 (c) After drying of surface finaly applying a coat of STAR PROOF SP-600 of any colour as per manufacturers instruction. NOTE:- The work of above water proofing treatment sall be got executed as per manufacture instructions through expert team or authorised applicator of manufacturing MS STAR SS PL Make:- APURVA INDIA/ STP/ apply treatment by using DAMPGUARD treatment of Dr Fixit as per manufacturer instructions and approved by GE.

Rendering 20mm thick plaster on concrete surface in CM 1:3 on roof without using extra cement and mixed with WPC as per manufactures instruction (WPC shall be measured and paid separetely) complete all as specified and directed.

Supply only liquid Water proofing compound complete all as specified and directed

Steel rolling shutters with 1.25mm thick laths, gear operated with bevel gear box including crank handle, top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position including taking down existing shutter complete all as directed.

Taking down carefully existing Steel rolling shutters of any size and type including top cover, anchoring rod, hasp and staple, gear box and refixing in same position after repairs by replacing unserviceable components like ball bearing, bevel gear box,safety lever lock, laths etc including oiling, greasing to make the rolling shutter functional complete all as directed.

MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing including dismantling existing frame work complete all as directed.

Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with ri-veted or welded seams, including bending or turning up, mitred angles, etc. as required including taking down existing sheat complete all as directed.

Supply and fixing in repairs MS galvanised chain link fencing, of size 4mm dia and mesh size 100x100mm to any type of standards, rails, straining bolts etc including provision of binding wire including taking down dismantling existing fencing complete all as specified and directed

Mild Steel screw bolts 5 to 10 mm dia (machine made ) with hexagonal or squre head at one end and screwed the other or screwed both ends to be fitted with washers and one hexagonal or squre nuts exc 5 cm but n exc 10 cm long complete all as specified and directed.

Mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

4 mm thick cement plain building boards fixed in ceiling to timber framework with screws with and including all accessories and two coats of white wash including dismantling existing boards etc complete all as specified and directed. Note- Work to be carried upto a height of 7.5 m

2nd class hard wood, plain fillet, square, rectangular or triangular in section, clean sawn, secured with nails, sectional area exc 3 sqcm but n.exc 6 sqcm fixed in repair complete all as specified and directed.

600x600mmx4mm thick 'E' board classic factory finish as in false ceiling including supply and fixing 'Tee" grid frame work made of special section of MS galvanized sheet 0.30mm thick, bottom portion painted with cellular nitro painting, consisting angle cleats of size 25mm wide 1.6mm thick with flange fixed to RCC/CGI roofing with dash fastener or wraping the suspending wire around the existing wooden/steel purlin/rafter for suspending grid frame work of size 600mmx600mm suspended with 02 Nos, 1.60mm dia GI wire @ 600mm C/C on main Tee and fixed to T-grid ceiling fan work with the help of level clip or as per manufacturer direction. The section consisting of main Tee 37mm x24mmx0.60mm thick, cross runner tee 37mm x24mmx0.60mm and perimeter angle 24mmx 24mmx0.50mm thick shall be fixed to wall with GI screw of 40mm long @ 450mm C/C along the perimeter of wall all as per manufacturer's instruction and including taking down existing boards any thickness including cover fillets etc complete all as directed

6mm thick cement, corrugated or semi-corrugated sheets as in roofs, wall etc fixed with L-type or J-type or cranked hook bolts including washers etc complete including dismantling of existing corrugated AC/fibre/GI sheet any pattern as in roof covering etc complete all as specified and directed.

0.63mm thick plain galvanized mild steel sheeting with grade of Zinc coating 120 fixed with "L"or "J" type hooks and washer as in ridges, hips, valley gutter etc including dismantling old ridges, hips valley gutter any pattern etc complete all as specified and directed.

2nd class hard wood scantling clean swan 40 sqcm and over in section fixed with nails in framed work in any position including dismantling existing timber scantling complete all as specified and directed.

Mild steel works as in wind ties, fillets for securing fencing and similar work etc including dismantling existing MS Work complete all as directed.

Preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Preparing of new plastered or un-decorated surfaces of walls and applying three coat of white wash complete all as specified and directed.

Preparation of new or previously untreated wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparation of new or previously untreated wooden surfaces of any description, not exceeding 10cm width or grith when unconnected with other painting or when painted in different tint and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Preparation of old painted steel surfaces of any description not exceeding 10cm width or grith when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Preparation of old plastered surfaces of ceilings by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls complete all as specified and directed.

Preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

Preparation of old plastered or concrete surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, pillar etc and applying one coat of synthetic enamel paint on complete all as directed.

Complete removal of existing treatment of walls and preparing surfaces and applying two coat of weather exterior emulsion paint (Apex paint of Asian Paint / Weather proof of berger) on walls over a coat of primer complete all as directed.

M/S RAJESH KUMAR GOYAL