Construction of E-Library in Subhash Park, Municipal Council, Ambala Sadar. Recall

Supply and installation of stud partition using Cstud. 48x0.5mm C-stud (IS 15961) placed at 610mm c/c in 50x0.5mm (IS 15961) floor and ceiling channel . Floor and Ceiling channel is anchored to the floor and True ceiling using Rawl plug Ø8x45mm {Material-IS 513 CR1 grade, Zinc coating, Pull Out Load-6.8kN for M30 concrete grade} /Hilti Nail anchor fasteners at 600mm c/c in center line manner. Floor channel to be wrapped with 70µ Self Adhesive LDPE moisture barrier film to further improve corrosion resistance performance. A noggin channel {Material-IS 513,Y/S-300Mpa, Finish - AZ150 (IS 15961)} of 48x0.5mm width has to be provided at the horizontal joints of the two boards. The frameowrk to be packed with 50mm th. 48kg/Cum. density Rockwool insulation infill to be covered with RP Tissue placed in metal framework. Framing to be wrapped with Double layer of 12.5mm thick Standard Gypsum plasterboards (Confirming to IS 2095: Part 1) is screw fixed vertically to either side of wall Studs with 25mm long Drywall Screws at 300mm centers. The screw fixing of Gypsum plasterboards to the metal framing at the periphery, openings and cut edges should be at 150mm centers. The horizontal and vertical joints of the Gypsum plasterboards on both sides of the metal framework must be staggered so as to avoid through and through joints. All joints to be taped and finished with 50mm wide Paper tape and All Purpose Joint compound. (Confirming to ASTM C475). The junction of the partition with masonry and all penetration through the partition has to be treated with Hilti/Pyroplex fire and acoustic sealant. All other detailing and specifications to be followed as per manufacturer specifications

132mm thick Gypsteel ULTRA™ stud partition which includes two layers of tapered edge 15mm thick Gyproc® FRMR (conforming to IS 2095 Part 1 : 2011) fixed to either side of 72mm Gypsteel ULTRA™ Acoustud (0.5mm thick having one flange of 34mm and another flange of 72mm made of GI Steel). Studs are placed at 610mm centre to centre in 72mm Gypsteel ULTRA™ floor and ceiling channel (0.5mm thick have equal flanges of 32mm made of GI steel). Floor and ceiling channel are anchored to the floor and ceiling slab using suitable anchor fasteners(Anchor fastener HILTI HLC 8X40/HILTI X-GN20MX) at 600mm c/c in zigzag manner. 15mm thick Gyproc® FRMR board strip of 94mm width is placed between ceiling channel and ceiling slab to improve fire performance of the system. Stud and floor channel are crimped together by using crimping tool. A 92mm Gypsteel ULTRA™ noggin channel (0.5mm thick having two flanges of 40mm each) is to be fixed using Gyproc® Metal to Metal flat head screws at the horizontal joints of the boards. The boards are to be fixed vertically to the framework with joints staggered to avoid leakage through joints with Gyproc® drywall screws of 25mm and 35mm at 600mm C/C at centre and 300mm C/C at periphery of board. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc® Jointing compound, Gyproc Joint Paper tape (as per recommended practices of Saint- Gobain Gyproc India) The junction of the partition with masonry and all penetration through the partition has to be treated with fire sealant. M3 Rockwool of density 64Kg/m3 has to be provided with RP tissue cover in the framework.

SINGLE GLAZED TOUGHENED GLASS PARTITIONS-with SYSTEM-50 FRAME PROFILES: Supply and installation of Aluminium Framed Glass Partition for Access and Cabin System for minimal frame, room dividing solutions. Single glazed mullion free demountable glass partition using Toughened/ Laminated glass in proprietary natural anodised/Black aluminium sections ALT 50 of size 50mm x 30mm with Concealed sealing (No visible Gaskets/Seals) with acoustic rating of Minimum 32 db with third party test certificate. The profile will have Carpert Groove at the Bottom on both sides for accomodating max. 8mm carpets. THe Glass to be fixed with help of Proprietary Stability GRIPPER Clamp to have a stable system. It should consists of intermediate slim junction profiles for Glass to Glass vertical joints, 90 Degree L Junction and T Junction profiles suitably to be used as per room configuration designs.No VISIBLE Clip Lines to provide clutter free view at both side of section. The Glass to be Offset mounted towards outer edge leading to minimum aluminium frame on one side. Optional Profile Bottom Seal pair for additional accoustic. Glass thickness - 10( LSG).shall be included in the product.

Providing and fixing Philips LED 4` batten light.Philips, bajaj

Providing and Fixing 100 mm th. Wooden partition supported with Al. framing partition frame work consisting of 50mm x 25mm x 1.2mm (with 0.581Kgs / Rmt as per IS Standards of Jindal or equivalent make) thick extruded aluminum box section framework at spacing not exceeding 600mm both ways (horizontal and vertical). Framework formed using 50mm x 25mm x 1.2mm thick extruded aluminum box section connected using 50mm X 25mm X 1.2mm thick `L` angle support cleats fixed with 12mm galvanized metal screws. Partition framework to be secured to floor, structural support and nearest structural member using galvanized metal screws and wooden dowels. Framing shall be taken upto structural ceiling slab- with a horizontal member at top and bottom. Aluminum section to be cladded with 12 mm th. commercial plyboard on both the sides. Rate to be inclusive of making cut outs for services. Mode of measurement shall be as per elevational area.including rockwool insulation.Make ,Bhutan TUFF, ACTION. EXCLUDING FINISHING LAMINATE/ VENEER

Providing and Fixing 1mm thick laminate as/approved sample laminate over MDF/ Ply, joints should be staggered such that they do not overlap joints of MDF. Make Merino, greenlam, Virgo

Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1stclass hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. Inlcuding jointing pasting with as per design and grooves, matching with color of veneer. Complete in all respect.

Providing and fixing of modular trap doors as per architects approval. Make: Knauf (Trap Doors - 450X450mm)

Providing and Fixing necessary hardware like door closer,stopper, hinge(minimum 4 nos.), tower bolts, handle and lock, all in SS brushed finish

Supply and installation of GI open cell 600X600X100 mm ceiling with main runner 15 mm suprafine 32WH cross tee 4`15mm suprafine cross Tee 1` 15mm suprafine wall angle 19*19 make Armstrong