Renovation of Internal Electrification work at newly renovated Forms _ Stationery annex building _Machine Section located under the premises of Tripura Government Press GA _Printing Stationary_ Department Agartala West Tripura

Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with 6/10 amps modular type switch, cover plate, surface modular switch board including connection etc as required:-

Short Point :-

Medium Point :-

Long Point :-

Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) on surface modular switch board, earthing the 3rd pin etc. as required:-

Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) on surface modular switch board, earthing the 3rd pin etc. as required:-

Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required.

2 X 1.5 sq mm

2 X 2.5 sq mm

4 X 6 sq mm

4 X 10 sq mm

Wiring for Circuit/Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping/ conduit in recess/surface including connection etc. as required:-

1 X 1.5 sq mm

1 X 2.5 sq mm

1 X 10 sq mm

1 X 16 sq mm

4 X 50 sq mm

4 X 95 sq mm

Wiring for Circuit/Sub-main with the following sizes PVC insulated Copper conductor cable (FR) in PVC conduit including connection etc. as required:-

4 X 6 sq mm

Supplying and laying of following sizes XLPE insulated PVC sheathed Aluminium conductor Un-armoured cable including necessary connection etc as required.

3 core 4 Sq mm

Earthing with 40 mm dia G.I. Earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top CI cover plate size 12"x 12" having locking arrangement including CC work, holes on earth pipe etc. as required.

Extra for using salt (5 kg) and charcoal (46kg) for pipe earth electrode as required.

Proving and fixing / drawing of 4.06 mm dia (8 SWG) G.I. wire on surface or in existing G.I/ PVC/ Polythene pipe for loop earthing as required.

Providng and laying 15mm dia(medium gauge) G.I. pipe for drawing of 4.06mm (8SWG) dia G.I./ Copper wire for earth connection from earth electrodes etc as required.

Providing earthing system with maintenance free earthing electrode of 50 mm dia & 3 mtr long of dual electrode technology filled with highly conductive compound and back fill compound of 2 nos. 25 kg bag, terminal size 32mmx 6mm including accessories with masonry enclosure of CI cover plate size 12"x 12" having locking arrangement including CC works etc as required:-

Supply and fixing of 25mm x 5mm GI strip on wall/ floor of the building for horizontal/ vertical run including necessary spacers and porcelain insulators at regular intervals.

Supplying and installation of Switch disconnector fuse unit (main switch) of the following ratings with all accessories including necessary connection etc. as required:-

100 amps 415 volts TPN main switch (rewireable):-

Supplying and installation of Bus bar chamber of the following ratings and sizes made of steel sheet enclosure with all accessories including necessary connection etc. as required:-

100 amps 415 volts four strip Copper busbar chamber 6 ways of size (610mmx410mmx120mm):-

400 amps 415 volts four strip Copper busbar chamber 4 ways of size (455mmx330mmx120mm):-

Supplying & installation of TP/FP MCCB of following ratings in the existing MCCB enclosure/ panel board including connection etc as required (Ics=100% of Icu with adjustable settings):-

250 amps FP MCCB, Breaking capacity 36KA (Thermal Magnetic) :-

160 amps FP MCCB, Breaking capacity 25KA (Thermal Magnetic) :-

16 to 100 amps FP MCCB, Breaking capacity 16/18KA (Thermal Magnetic):-

Supplying and installation of powder coated steel sheet enclosure for 415 volts MCCB (TP/FP) complete with necessary connection etc as required:-

Enclosure suitable for MCCB upto 100 amps:-

Enclosure suitable for MCCB above 100 amps upto 250 amps:-

Supplying & installation of RCCB (sensitivity 30mA to 300mA) of following ratings in the existing MCB DB including connection etc as required:-

25 to 40 amps FP RCCB:-

Supplying and installation of fuse unit kitkat/HRC/HBC of the following ratings in existing main switch/panel board including necessary connection etc as required:-

200/250 amps kitkat porcelain fuse unit with base(rewireable):-

100 amps kitkat porcelain fuse unit with base(rewireable):-

Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required.

6 way horizontal TPN MCB DB (Single door):-

4 way horizontal TPN MCB DB (Single door):-

4 way SPN MCB DB (single door):

Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connection as required:-

6 to 32 amps SP MCB:-

6 to 32 amps FP MCB:-

Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):-

Surface mounted box type batten suitable for single 18/20 watt integrated LED tube lamp (without lamp):-

Surface mounted box type batten suitable for double 18/20 watt integrated LED tube lamp (without lamp):-

Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:-

18/20 watt LED tube with integral driver and polycarbonate diffuser (50000 burning hours and minimum lumen output of 100lm/watt):-

9 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :-

Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):-

90 watt LED street light fixture with integral driver and secondary lens (IP 66):-

Supplying & fixing of 1200 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated Copper conductor cable(FR) (ISI marked, BEE 1 star/minimum service value 4.0 m3/min/W) : -

Supplying & installation of 225/230 mm sweep metalic body exhaust fan including connection etc as required

Supplying & installation of 450 mm sweep 1400 rpm metalic body exhaust fan including connection etc as required (ISI marked) :-

Supplying and fixing of the following modular accessories including necessary connection etc. as required.

4 step fan regulator (1M):-

3/6 pin 16/20 amps socket outlet (2M) :-

20/25 amps single phase motor starter switch (2M):-

Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required.

1-2 module plastic switch board:-

Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required.

1-2 module :-

Supplying and fixing of the following electrical accessories including necessary connection etc. as required.

32 amps DP kit kat switch:-

Supplying and fixing of the following sizes PVC conduit (medium gauge) on surface with all accessories etc. as required.

32 mm dia

Supplying & fixing of G.I. pipe (medium gauge) bracket fabricated at suitable angle for fixing of outdoor light on wall/ RCC base with necessary MS clamp, nut, bolt etc as required:-

40 mm dia

Supplying and fixing of MS frame made of (25mm x 25mm x 5mm) MS angle with necessary support by (40mm x 6mm) MS flat and 12 mm thick marine plywood on top, grouted on wall with 4 nos legs (25mmx25mmx5mm MS angle 20 cm long) finished with red oxide and 2 coat synthetic enamel paint including necessary cc work, mending the damages & painting etc as required:-

Drawing of armoured/un-armoured cable with proper saddling etc as required:-

Supplying & installation of shutter for 225/230/300 mm sweep metalic body exhaust fan in the existing hole as required:-

Making different sizes of hole in the wall for fixing of exhaust fan including finishing the same with cement plastering and painting etc as required:

Supplying and fixing of thermoplastic cable junction box with connectors suitable for following sizes cable :

1.5 sqmm - 4 sqmm Cable:-

Supplying and fixing of Copper terminal ends (LUGS) - long barrel of following sizes: -

Supplying and fixing of aluminium terminal ends (LUGS) - long barrel of following sizes : -

Please Enable Macros to View BoQ information