CA NO. CWE/HILLS/RKT/26 OF 2025-2026 SPECIAL REPAIR TO BLDG NO P-09 (12 X OR MD ACCN), REPAIR TO PATH, REPAIR TO DRAIN AND SEWAGE AT ALMORA CANTT (22 RAJPUT) UNDER GE RANIKHET

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness.(below or above ground level) Complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.Complete all as specified and directed.

M & L for screed bed or bedding layer 15mm thick in cement mortar (1:6) for laying floor finishes Complete all as specified and directed.

M&L for Anti skid floor tiles 10-12mm thick square of size 400x400mm set and jointed in neat cement slurry and pointed in white or coloured cement to match to match with the colour of tiles laid on, Complete all as specified and directed.

M & L Anti skid floor tiles 10-12mm thick square of size 600x600mm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on, Complete all as specified and directed.

All as per item no 5 here in before, but for dado /skirting Complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:4 for dado / skirting complete all as specified and directed.

M & L for glazed ceramic Coloured/ Printed tiles 300mm x 450mm x 7mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/coloured cement to match the tiles, and including 10mm thick rendering in cement mortar 1:4 etc. Complete all as specified and directed.

M & L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in cement mortar 1:4 set & jointed with grey cement slurry and pointed in white cemengt mixed with pigment to match the shade of the slab including cutting, rubbing and polishing incl taking down cement plaster on brick or concrete surfaces all as specified and directed.

M & L Black Granite (of any type) tiles 20 mm thick machine cut , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishig types in cooking platforms and like Complete all as specified and directed.

Dismantling of boarding , any description fixed in any position like wall ,wooden flooring and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet Complete all as specified and directed.

S & F Second class hardwood 25 mm thick boarding plain one side with butt joint fixed with nails in any situation. Complete all as specified and directed.

Fixing only second class hardwood boarding of any thickness complete all as specified and directed . ( Note :- Old but serviceable boarding reterived from item No. 11 shall be used as directed by engineer in charge)

M&L 18/19mm thick prelaminated particle board, interior graded, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in cupboards/ kitchen cupboards with teak beading of all sides fixed in repair complete all as specified and directed.

S& F ball catches / magnet catches 8mm dia for cupboard shutter, brass body and striking plate including letting in all as speciofied and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for. Complete all as specified and directed

M & L for RCC Type B1 1:2:4 (20mm graded aggregate) for Chajjas complete all as specified and directed.

Formwork to rough finished surface of concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping). Complete all as specified and directed

M & L for TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection finishing the surface even and smooth without using extra cement Complete all as specified and directed.

Dismantling laid, bedded and pointed in any mortar Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc.&removing rubbish to a disance not exc 250m Complete all as specified and directed.

M&L for rendering 15 mm thick readymade plaster on inner/outer walls with Ultra Tech READIPLAST or equivalent in JSW Enduroplast/ACC Suraksha ready use plaster, by adding 17-19% of potable water by weight of material or as per manufacturers instructions, for thickness above 15mm, it is recommended to be applied in multiple layers. Ready mix plaster shall complies with IS 1661-1972, IS 2250-1965, IS 2402-1963 and confirms the Compressive strength @ 28 days, 10-12 Mpa/Bulk density 1500-1600 kg/cum. Note : The rate quoted by the contractor shall include cleaning of surface, application as per instruction and scaffolding upto 10 mtr height, complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finished smooth and even in ceiling without using extra cement. Complete all as specified and directed

M&L for preparing newly plastered wall surfaces and applying two coat of distemper oil emulsion over a coat of primer(Priming the plastered and other surface preparatory to distempering) complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre /10 sqm over new surface. Complete all as specified and directed.

M&L for complete removal of existing treatment for preparing old painted surfacess and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for preparing old plastered surfaces of ceilings and applying two coats of white wash incl complete removal of old plastered surfaces. Complete all as specified and directed

M&L for complete removal of existing treatment for preparing old painted surfacess and applying two or more coats of 100% premium acrylic emulsionpaint having VOC less than 50 gm /litre and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exteriror paint of requird shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and includidng priming coat of exteriror primer applied @ 0.90 litre/10 sqm complete all as specified and directed.

M & L for applying two coat of roof paint (Coptic of Jenson & Nicholson Paints or Antisol of Berger Paints) over primer red oxide on steel and iron surfaces of CGI / PGI sheet roof of any description not otherwise described over 10 cm by applying with mordant solution, including washing & cleaning etc. Complete all as specified and directed.

M & L for preparation of old painted steel and iron surfaces of CGI/PGI sheet roof of any description not otherwise described over 10 cm width or girth by straightening, cleaning , removing rust and washing cleaning etc to receive painting and making good with red lead puty whenever required and applying one coat of roof paint (Coptic of Jenson & Nicholson Paints or Antisol of Berger Paints) Complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each.& removing to or from store all as specifed & directed.

All as per item No 33 here in before but exc. 1.5 sqm n. exc. 4sqm each complete all as specified and directed.

Taking down and Refixing in the same opening shutter of any description exceeding 1.00 Sqm n. exc 2.00 Sqm each complete all as specified and directed.

Taking down shutters (per leaf) of any description exceeding 1.00 sqm each but not exceeding 2 Sqm each complete all as specified and directed.

M&L for second class hard wood plain, solid, straight chowkats and frames, wrought, frame rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F factory made shutters 2nd class hard wood rail and style 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treat complete all as specified and directed.

S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed.

S&F glazed and skeleton shutters 30 mm thick using second class hard wood open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc; sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.20(b); supplied and fitted in chowkats complete complete all as specified and directed.

S&F factory made single extruded WPC (wood polymer Composite) solid door/ window/ Ceosetory window & other Frames/ Chowkhat of size 45 x 70 mm comprising of PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded stat headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N / mm 2 and resistance to spread of flame of Class A catogory with property of being termite/ borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Complete all as specified and directed.

S&F factory made single extruded WPC (wood polymer Composite) solid plain flush door shutter of 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrwal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N mm2 modulus of elasticity 850 N / mm2 and resistance to spread of flame of Class A catogary with property of being termite/ borer proof, water/ moisture proof and fire retardanat and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-In-Charge (Note:- stainless steel butt hinges and necessary SS screws shall be paid separately. Complete all as specified and directed.

M&L for PCC 1:3:6 Type C1 (using 20mm graded coarse aggregate) as in hold fasts in masonry walls etc complete all as specified and directed.

S&F FI as in clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed.

S & F 100 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed. complete all as specified and directed.

S & F 150 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed. complete all as specified and directed.

S & F butt hinges, medium weight, Mild steel and fixed, size of hinges 75mm complete all as specified and directed.

S & F butt hinges, medium weight, Miled steel and fixed, size of hinges 100mm complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

M & L for Old painted surface to steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel including preparation of surfaces complete all as specified and directed.

M & L for newly painting to steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for. complete all as specified and directed.

S & F MS framed work such as grills, gratings, etc., with end of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290 Gde- E- 165. complete all as specified and directed.

M & L MS rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 290 gde E -165 complete all as specified and directed.

S & F in Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless steel wire staples. complete all as specified and directed.

S & F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless steel wire staples. complete all as specified and directed.

S & F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

M & L for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces. complete all as specified and directed.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store. complete all as specified and directed.

Taking up or down 40 mm bore steel tubing and connections, including cleaning for refixing or removal to store. complete all as specified and directed.

S&F GI water tubing of 15mm dia ,medium grade conforming to IS-1239 (Part-1) including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union dockets etc & fixed to walls, ceilings & laid on floors complete all as specified and directed.

Refixing of old 15 mm bore steel tubing and connections in new or old position (walls, ceiling, floors etc.) complete all as specified and directed.

S&F GI water tubing of 40mm dia ,medium grade conforming to IS-1239 (Part-1) including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union dockets etc & fixed to walls, ceilings & laid on floors complete all as specified and directed.

Refixing of old 40 mm bore steel tubing and connections in new or old position (walls, ceiling, floors etc.) complete all as specified and directed

S&F in repairs stop valves , cast copper alloy, fency type chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore dia of pipe. complete all as specified and directed.

S&F in repairs stop valves, cast copper alloy, fency type chromium plated, with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore dia of pipe complete all as specified and as directed.

S & F vitreous china wash basin, white, flat back, size 550mm x 400mm, (flat back or angle back type) including brackets and including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs complete all as specified and directed.

S & F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Complete all as specified and directed

S & F in repairs 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S & F in repairs bib taps, cast copper alloy, 15 mm dia, Chromium Plated, fancy type with crutch or butterfly handle, screwed down for iron pipe and fixed etc. complete all as specified and directed.

S&F in repair vitreous china coloured European type WC (single piece) including connection to drain, 'S' trap and fixing bolts, plastic water closet seat cover complete all as specified and directed.

S&F in repair health facuet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all respect as specified and directed.

S&F in repair Traps 100 mm P or S with long arm all complete all as specified and directed.

S&F in repairs PVC low level flushing cistern, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets, connection to pipe complete all as specified and directed.

S&F in repair 600mmx450mm bevelled edge looking mirror and fixed to wooden plug with CP brass screws and cup washers Complete all as specified and directed.

S& F 32mm PVC waste pipe for wash hand basin/kitchen sink complete all as specified and as directed.

M&L for 75mm dia PVC floor trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR), waste & vent pipe single socketed in any length with rubber ring joints & fixed to wall or in floor complete all as specified and directed.

S & F 100mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D; type, 60 cm long between flanges complete all as specified and directed.

S&F in repair soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repairs Stainless steel wall mounted plate rack of size 780mm x760mm x 240mm, thickness of sheet not less than 1.0 mm and weight not less than 7.50 kg of approved design/pattern (as approved by Engr-in-charge) with provision for keeping plate and other crockery, fixed with screw and rawl plugs etc on wall complete Make as approved by GE. Complete all as specified and directed.

S&F in repairs Chromium plated shower rose 125 mm swivel type complete all as specified and directed.

S & F in repair 20mm Dia Aluminium alloy anodised curtain rod decorative fency type with brackets Complete all as specified and directed.

S & F in repairs PVC connections 15mm dia , 450mm long, , with PTMT nuts & washers at both ends complete all as specified and directed.

Dismatling & Disconnecting existing PVC tank Exc 500 Ltr and n. exc 1000 Ltr complete all as specified and directed.

S & F Rotational moulded PVC water storage tanks three layer 1000 Ltrs capcity (cylindrical vertical with closed top) hoissted and fixed in position complete all as specified and directed.

S and F Ball brass valve 20 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

Dismantaling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F 0.63 mm galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls, etc with grade of zinc coating 275 complete all as specified and directed.

S & F of 0.63 mm plain galvanised mild steel sheeting, in ridges, hips, vallery gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coaating 275 complete all as specified and directed.

S & F in repair 75mm bore PVC (SWR), waste & vent pipe single socketed in any length with rubber ring joints & fixed to wall or in floor complete all as specified and directed.

S & F 75mm bore PVC (SWR) bends of any radius complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

M & L for anodised aluminium snap grid size of grid 605x605mm frame work for false ceiling including hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed

M & L for 4mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl 75mm bore complete all as specified and directed.

S&F in repair gun metal, globe or gate valves, with iron wheel head, screwed both ends bore dia of pipe 40mm for iron pipe and fixed for, complete all as specified and as directed.

M&L 75 mm thick cement concrete 1:4:8 type D-2 finished fair and even as in sub base complete all as specified and directed.

M&L for chequred cement concrete tiles of size 300x300x25 mm thick coloured rubber pressed glossy finish, set and jointed in neat cement slurry and pointed in white or colour cement and match the surace of tiles as foor/staps, complete as all specified and directed.

Surface channel in concrete 1:3:6 (40 mm graded aggregate) for drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/ stopped ends etc complete all as specified and directed.

Demolition brick work or stone/ boulder masonery built in cement mortar including all quoins , pillars etc. Complete all as specified and directed.

M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) Complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for providing plain cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in coping, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in Hard/ Dense soil complete all as specified and directed.

Demolition and breaking up drain pipes 150 mm (salts glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M & L 150 mm dia Salt Glazed stone ware drain pipes laid in trenches and jointed as specified complete all as specified and directed.

M & L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150mm bore complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and directed.

Removing Excavated soil exceeding 250 M but not exceeding 500M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

M&L for cement concrete 1:2:4 in haunching and benching for manholes complete all as specified and directed.

Taking down carefully copper /aluminium point wiring (light,fan,socket or power ) complete fittings such as switches and fixtures ceiling roses, pendants, regulators, sockets, lamp holders, bracket light fittings, bulk heads fittings, tube light fittings etc removing the materials from site and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M & L point wiring for modular fittings for one light point/ fan/ bell/ 5Amps socket out let (independent)point controlled by one, one way switch with 1.5 sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FR-LSH) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia )with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) incl modular metal flush box for mounting modular fittings and covered with modular cover plate with frame and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed One light/One fan/one bell point controlled by one modular switch

All as per item no 119 here in before but for One light point controlled by Modular Two way switch

All as per item no 119 here in before but for One modular socket outlet 3 pin 6 amps controlled by one switch on same board.

All as per item no 119 here in before but for One modular socket outlet 3 pin 6 amps controlled by one switch on independent board.

All as per item No 119 herein before but wiring with 2.5 sqmm copper wire (FR-LSH) PVC and 2.5 sqmm earth wire for socket outlet 6 pin 16 amps on independent board. complete all as specified and directed.

Supply and fix modular type switch single pole, one way 6 Amp complete all as specified and directed.

Supply and fix modular type switch single pole, two way 6 Amp complete all as specified and directed.

Supply and fix socket out let multi 5 pin, 6 Amps, modular type complete all as specified and directed.

Supply and fix switch modular type single pole, one way 16 Amp complete all as specified and directed.

Supply and fix socket out let 2 in1,3 pin, 6 and 16 Amp, modular type complete all as specified and directed.

S & F call bell ding dong AC, 230V single pole complete all as specified and directed.

S&F bell push piano flush type single pole, one way 5 Amp complete all as specified and directed.

S&F ceiling rose, PVC/ Poly carbonate,isolated body three terminal complete all as specified and directed.

Supply and fix High quility LED T5 integrated batten tube light 20 Watt with aluminium extrusion with frosted PMMA/PC diffuser, internaly pre wired of 1.5 sqmm twin twisted flexible cable complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 1x10 watt, 220 Volt AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size & length, complete all as specified and directed

S & F in repair 9 watt LED bulb, cool day light, 230/240 volts AC, complete all as specified and directed.

Supply & fixing Geyser 25 Ltr capacity, five star rating with digital display for temperature of ISI mark with making of 04 Nos hole amd grouting of suitable size of nuts and bolts and making good as per existing surface of Make Havells, Bajaj Crompton, complete all as specified and directed

S & F MCB single pole, 240 volts, 5 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type in the MCB DB including taking down complete all as specified and directed.

S & F in MCB SPN, 240 volts, 40 Amps (Isolator), rupturing capacity 10 KA, ‘C’ curve type complete all as specified and directed.

S & F in repair MCB Four pole, 415 volts, 40 to 100 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

Supply and fixing sheet metal enclosure for DBs (double door type) single pole and neutral 8 way including blacking platge as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

Supply and fixing sheet metal enclosure for DBs (double door type) Triple pole and neutral 12 way including blacking platge as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

Supply & Fixing in replacement LED solar street light fitting 24 watt including galvanised steel pole in built, lithium ion battery, solar panel, charge controller with dusk down sensor and testing after installation complete all as specified and directed.

S&F sub main wiring with two single core FR-LSH PVC insulated and sheated 1100 Volts grade 2.5 sqmm size cables PVC insulated stranded copper condutor fixed in PVC conduit pipe 25mm dia with all accessories and one continuous run of 2.5 Sqmm copper conductor pvc (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing surface) (Note- Two single core cables along with earth wire and conduit shall be measured as one unit length). complete all as specified as directed.

S & F Lamp holder, PVC / polycarbonate with back plate & metal ring suitable for batten fittings, complete all as specified as directed.

Supply & Fixing Exhaust fan steel body heavy duty ISI mark, AC single phase, 230V of size 300 mm sweep with blades, frame and louvers including all connecting accessories including, cutting, opening through bricks/ stone/PCC block wall for fixing in openings , connecting flexible cable wire from ceiling rose to exhaust fan complete all as specified and directed .

S&F exhaust fan, made of sturdy Engineering plastic complete, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 250m with self-louvers shutters with frame, AC single phase 230 Volt, grouting both ends in wall up to required length, including making hole of suitable size & making good disturbed surfaces of wall to match the existing surface & and removing the rubbish / debris to a distance as directed by Engr-in-Charge and connecting with flexible cable 3 core copper conductor of size 23/0.0076 of suitable length from ceiling rose to exhaust fan, complete all as specified and as directed

M&L for earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick burried directly in ground verticaly (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost.

Builders Harpal (BID ID -3369961)

SS Construction Co (BID ID -3369430)

KAPOOR ELECTRICALS (BID ID -3362630)

M/s Arihant Builders (BID ID -3364577)

M/S Manmohan Singh Anand (BID ID -3363286)

Amit Engineering (BID ID -3363275)

SANJEEV CONSTRUCTIONS (BID ID -3364938)

M/S AJIT CONSTRUCTION CO (BID ID -3364144)