Loading
Loading…
Loading…
Tender Value
₹3.3 Cr
EMD Value
₹6.5 L
Closing Date
11 Sept 2026, 12:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
GS
21 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where
V= Advertised value of the tender in crores of Rupees; N= Number of years prescribed for completion of work for which bids have been invited.
The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
The tenderers shall submit requisite information as per Annexure-VIB (in GCC 2022 along with latest correction slips), along with copies of Audited Balance Sheets dulycertified by the Chartered Accountant/ Certificate 1.2.1 from Chartered Accountant duly supported by Audited Balance Sheet. The Annexure VIB should be signed by thetenderer and chartered accountant and non-submission of the requisite information in specified format will lead to rejection of the offer summarily.
Electrical Contractors License -. The contractor should have a valid electrical contractor license for voltage equal or more than 11kV from the concerned statutory authority of any states of India and the Copy of the same should be uploaded with the tender offer. The electrical license should be in the name of the firm. If the voltage class of the license is not mentioned in the license, the license should be treated as "B"class license only. It must be ensured that the validity of electrical license should be valid during the entire contract period duly renewing at appropriate time for extending validity. Non submission valid Electrical License by the bidder shall result in summarily rejection of his/their bid.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited
Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or
Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or
One similar work costing not less than the amount equal to 60% of advertised value of the tender.
One Single similar work means: "Tenderer should have experience in execution of any electrical work which includes High voltage (11KV or above) electrical system works of various types of installations"
13 conditions · 4 needing a document upload
GST: It may please be note that the supplier of goods and/or services for the said tender /agreement, would be subject to GST Act and Rules as applicable from time to time.
Taxes applicable from time to time will be deducted from the total contract value.
The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than company/ Proprietary firm, Annexure -V(A) shall also be submitted by each member of a Partnership Firm / Joint Venture (JV) / Hindu Undivided Family (HUH / Limited Liability Partnership (LLP) etc, as the case may be. Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
If a tender is accepted on the quoted rates of bidder which is below 5% of the advertised tender value, an Additional Performance Guarantee @ 5% shall be submitted by the bidder as per clause 16(4)(h) of GCC.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer has to quote individual rates per unit per item for all Schedule items.
The quantities given in the tender document are indicative only. It is the responsibility of the contractor to work out the actual quantity required for execution of work. Any variation in quantity required shall be informed to the Engineer-in-Charge. In the case of operation of quantity less than the quantity indicated in the tender schedule, the payment will be released as per the agreed rates for the actual quantity executed and no compensation will be given for lesser quantity operation. In case the quantity required to be operated more than the quantity indicated in the tender schedule, the same shall be operated for the actual quantity required at site even if the variation is going beyond 150% of the agreed quantity. The payment for such excess operation will be released as per clause no. 42.2 of GCC. However the contractor should ensure that the variation of individual items in excess of 50% of the individual quantity should not result in variation of total tender value beyond 150% of the agreement value.
All terms and conditions available in the tender document are binding on the tenderers.
Railways reserves the right to accept or reject any or all the tenders and toward the work in whole or in part without assigning any reason for such action.
General conditions of contract-April 2022 and its correction slips from time to time will be applicable for this contract. The work should be carried out as per the terms and conditions available in the tender document.
The schedule shall be read in conjunction with the specification/Explanatory notes given at Part-IV of the tender document.
Electrical arrangements for new pit line and cat walk including gantry portal lighting at Trivandrum south new coaching terminal.
E-572-CN-ERS-WC-OT-606~SR
E-572-CN-ERS-WC-OT-606
Open
Works - General
12 Months
Ernakulam, Kerala
₹0
₹6.5 L
21 Aug 2026
21 Aug 2026
28 Aug 2026
175 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 3,25,99,595 | ||
| — | 42.00 | — | — | ||
| Supply and fixing of Brass cable glands / termination for sizes up to and including 50sqmm. | — | — | — | 9,702 | |
| — | 26.00 | — | — | ||
| Supply and fixing of Brass cable glands / termination for sizes above 50 sqmm and including 185 sqmm. | — | — | — | 14,196 | |
| — | 15.00 | — | — | ||
| Supply and fixing of Brass cable glands / termination for sizes above 185 sqmm and including 400 sqmm. | — | — | — | 18,255 | |
| — | 1.00 | — | — | ||
| Supply and provision of Mass concrete with 1:2:4 ratio | — | — | — | 13,433 | |
| — | 1.00 | — | — | ||
| Supply and provision of Mass concrete with 1:3:6 ratio | — | — | — | 12,081 | |
| — | 150.00 | — | — | ||
| Excavation of trench in all kinds of soil including refilling. | — | — | — | 1,19,550 | |
| — | 2.00 | — | — | ||
| Excavation of Cable trench across the concrete flooring / road / track | — | — | — | 2,614 | |
| — | 5.00 | — | — | ||
| Removing of Exg. Lights/fans & fittings of all sorts with all accessories and wiring and handing over to Railways | — | — | — | 420 | |
| — | 1.00 | — | — | ||
| Erection of cut rail post of up to and including 6 feet height | — | — | — | 3,125 | |
| — | 25.00 | — | — | ||
| Supply and fixing of PVC rigid wiring conduit of 20 mm dia and 2 mm thick, by open wiring method | — | — | — | 2,450 | |
| — | 25.00 | — | — | ||
| Supply and fixing of PVC rigid wiring conduit of 25 mm dia and 2 mm thick, by open wiring method | — | — | — | 2,950 | |
| — | 400.00 | — | — | ||
| Supply and fixing of PVC rigid wiring conduit of 20 mm dia and 2 mm thick, by concealed wiring method | — | — | — | 40,000 | |
| — | 3500.00 | — | — | ||
| Supply and fixing of PVC rigid wiring conduit of 25 mm dia and 2 mm thick, by concealed wiring method | — | — | — | 4,27,000 | |
| — | 2.00 | — | — | ||
| Fabrication, supply and fixing of pipe brackets for fixing of light fittings on posts / walls of buildings etc. | — | — | — | 3,146 | |
| — | 15.00 | — | — | ||
| Supply and fixing of Cable Route Indicator, Cast Iron plate type | — | — | — | 13,560 | |
| — | 20.00 | — | — | ||
| Cutting of conduit slots in wall with vacuum enabled grew cutting machine, refilling the grew with 1:3 cement mortal and finishing the slot with wall putty | — | — | — | 4,560 | |
| — | 2379.00 | — | — | ||
| Supply and laying of 6 SWG GI Wire | — | — | — | 1,11,813 | |
| — | 30.00 | — | — | ||
| Supply of Galvanized steel gantry structures as per specification | — | — | — | 53,58,600 | |
| — | 30.00 | — | — | ||
| Erection of Galvanized steel gantry structures as per specification | — | — | — | 8,16,630 | |
| — | 112.00 | — | — | ||
| Concrete for foundation and plinth in other than hard soil and rock as per specification | — | — | — | 15,52,992 | |
| — | 2.00 | — | — | ||
| Breaking of RCC pit line base concrete for casting gantry mast foundation as per specification | — | — | — | 47,540 | |
| — | 1200.00 | — | — | ||
| Fabrication, painting, supply and stacking of Steel ladders for lighting gantry portal up rights as per Drawing no. E/CN/ERS/SK/2021/03/R1 and steel sections for other requirements | — | — | — | 2,55,600 | |
| — | 1200.00 | — | — | ||
| Leading to site and erection of steel ladders | — | — | — | 39,600 | |
| — | 56.00 | — | — | ||
| Fabrication, transportation, supply and stacking of brackets for fixing handrail support consisting of 750mm long 75 x 40x 5mm channel, 750mm long 50x 6mm angle and 40mm dia 1.5 m long B class GI pipe with "T" at top. The brackets shall be fixed at the top of portal boom as detailed in Drg. No. E/CN/ERS/SK/2021/4 | — | — | — | 1,77,800 | |
| — | 56.00 | — | — | ||
| Supply of 16mm dia Hot dip galvanised 120mm long (2 nos) and 170mm long (2 nos) J bolts and other fixtures as given in drawing no. E/CN/ERS/SK/2021/4 and fixing of brackets above the lighting gantry portals at a hight of more than 8m from ground level | — | — | — | 78,512 | |
| — | 308.00 | — | — | ||
| Supply and fixing of 25mm B class GI pipe as hand rail in already erected brackets at the top of the portal boom and ladders | — | — | — | 1,30,900 | |
| — | 2379.00 | — | — | ||
| supply transportation and stacking of 4 core 16 sqmm XLPEinsulated PVC sheathed, armoured LT UG Cable as per specification, having a minimum weight of 0.560 Kg/m | — | — | — | 8,58,819 | |
| — | 160.00 | — | — | ||
| supply transportation and stacking of 4 core 50 sqmm XLPEinsulated PVC sheathed, armoured LT UG Cable as per specification, having a minimum weight of 1.250 Kg/m | — | — | — | 1,23,360 | |
| — | 1025.00 | — | — | ||
| supply transportation and stacking of 4 core 120 sqmm XLPEinsulated PVC sheathed, armoured LT UG Cable as per specification, having a minimum weight of 2.250 Kg/m | — | — | — | 17,28,150 | |
| — | 765.00 | — | — | ||
| supply transportation and stacking of 4 core 185 sqmm XLPEinsulated PVC sheathed, armoured LT UG Cable as per specification, having a minimum weight of 3.250 Kg/m | — | — | — | 19,63,755 | |
| — | 260.00 | — | — | ||
| supply transportation and stacking of 2 core 70 sqmm XLPEinsulated PVC sheathed, armoured LT UG Cable as per specification, having a minimum weight of 1.000 Kg/m | — | — | — | 1,45,340 | |
| — | 715.00 | — | — | ||
| Supply of 2 core 150 sq mm PVC/ XLPE insulated un armoured cablehaving a minimum overall 30mm dia and minimum weight of 1.80 kg/m for extending welding and Battery charger supply | — | — | — | 7,78,635 | |
| — | 2379.00 | — | — | ||
| Leading and laying of LT UG cable of size up to 35sqmm | — | — | — | 83,265 | |
| — | 420.00 | — | — | ||
| Leading and laying of LT UG cable of size from 50sqmm to 95sqmm | — | — | — | 38,220 | |
| — | 1790.00 | — | — | ||
| Leading and laying of LT UG cable of size from 120sqmm to 185sqmm | — | — | — | 2,00,480 | |
| — | 2659.00 | — | — | ||
| Supply and laying of 50 mm dia. PN-4, PE 63 grade HDPE pipe as per specification | — | — | — | 4,33,417 | |
| — | 100.00 | — | — | ||
| Supply and laying of 63 mm dia. PN-4, PE 63 grade HDPE pipe as per specification | — | — | — | 26,900 | |
| — | 100.00 | — | — | ||
| Supply and laying of 75 mm dia. PN-4, PE 63 grade HDPE pipe as per specification | — | — | — | 28,400 | |
| — | 100.00 | — | — | ||
| Supply and laying of 110 mm dia. PN-4, PE 63 grade HDPE pipe as per specification | — | — | — | 50,400 | |
| — | 42.00 | — | — | ||
| Assembling supply and stacking of polycarbonate cable junction box having a minimum size of 200 x 250 x 110 mm similar to Hensel model no. KF 2525B for outdoor cable termination equipped with 3mm thick hylem sheet base for mounting three numbers of 16A fuse unit and one number of bolted type terminal or termination of UG cable in gantry upright. | — | — | — | 3,10,800 | |
| — | 42.00 | — | — | ||
| Fixing of polycarbonate cable junction box having a minimum size of 200 x 250 x 110 mm in Gantry uprights with suitable brackets in wall/ pillers/gantry uprights etc. | — | — | — | 9,870 | |
| — | 520.00 | — | — | ||
| Supply transportation and stacking of 22W (6W+10W+6W) LED three dimensional lights working in 24 V AC supply having IP 66 class protection. (NOTE- 75% payment only will be released after supply and erection. Balance 25% will be released @ 5% per annum, till completion of the five year warrantee period) | — | — | — | 19,88,480 | |
| — | 520.00 | — | — | ||
| Supply transportation and stacking of 22W (6W+10W+6W) LED three dimensional lights working in 230 V AC supply having IP 66 class protection.(NOTE- 75% payment only will be released after supply and erection(70% on supply and 5 % after erection). Balance 25% will be released @ 5% per annum, till completion of the five year warrantee period) | — | — | — | 19,88,480 | |
| — | 1040.00 | — | — | ||
| Fabrication and supply of suitable GI brackets and fixing of Three dimensional under frame examination LED lights including supply and fixing of three core 1.5 sq mm wire of suitable length | — | — | — | 4,04,560 | |
| — | 100.00 | — | — | ||
| Supply, Installation, Testing and Commissioning of 6W LED ROUND LIGHT, with DIE CAST ALUMINIUM BODY (NOTE- 75% payment only will be released after supply and erection(70% on supply and 5 % after erection). Balance 25% will be released @ 5% per annum, till completion of the five year warrantee period) | — | — | — | 1,71,100 | |
| — | 4.00 | — | — | ||
| Supply, transportation and stacking of 200A Battery charger confirming to RDSO specification | — | — | — | 9,85,856 | |
| — | 4.00 | — | — | ||
| Erection testing and commissioning of 200A Battery charger with suitable fixing arrangement | — | — | — | 2,09,068 | |
| — | 24.00 | — | — | ||
| Fabrication, galvanization and supply of Hot dip galvanized EFT enclosure with Emergency feeding terminal as per the details given in Drawing no. CEE/CN/MS 13 and 14/2004 | — | — | — | 1,31,448 | |
| — | 24.00 | — | — | ||
| Erection of EFT enclosure with Emergency feeding terminal with suitable fixing arrangement | — | — | — | 10,464 | |
| — | 26.00 | — | — | ||
| Supply, transportation and stacking of pre-cooling switched interlocked sockets125 A 5 pin with surface mounting box IP 66/67 similar to Legrand make or Hensel make with 16kA 125A 4P MCCB similar to LK make model no. AU15S41253C or Legrand model DPX3 no. 420015 in suitable poly carbonate /FRP enclosure similar to Hensal make model no. KVPC8109 as per specification | — | — | — | 33,62,814 | |
| — | 26.00 | — | — | ||
| Fabrication and supply of GI brackets suitable for fixing the 125A precooling switched socket box and MCCB Box with 125A MCCB plug socket along with its erection | — | — | — | 61,048 | |
| — | 500.00 | — | — | ||
| Supply of material for Steel work in build up tubular trusses including cutting hoisting, fixing, fixing in position and applying a priming coat approved steel primer, and two coats of enamel paint, welded and bolted including special shaped washers etc. Complete Hot finished welded type tubes | — | — | — | 95,000 | |
| — | 500.00 | — | — | ||
| Fixing of Steel work in build up tubular trusses including cutting hoisting, fixing, fixing in position and applying a priming coat approved steel primer, and two coats of enamel paint, welded and bolted including special shaped washers etc. Complete Hot finished welded type tubes | — | — | — | 41,000 | |
| — | 20.00 | — | — | ||
| Supply of 0.56 mm thick , Aluminium Color coated troughed profile sheet with centre to centre pitch of 200 mm, depth of 32 mm, overall profile width 1092 mm, cover width 1000mm. | — | — | — | 22,840 | |
| — | 20.00 | — | — | ||
| Fixing of Aluminium profile sheets at all heights, levels and locations with Hex cap headed self-drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. | — | — | — | 4,040 | |
| — | 45.00 | — | — | ||
| Supply and fixing of of Poly carbonate cable looping box of size 300x300x170mm with transparent lid similar to K0200 of Hensel make with backlite connectors and fixing it with suitable clamps and supports | — | — | — | 4,05,945 | |
| — | 120.00 | — | — | ||
| Supply and fixing of of Poly carbonate cable looping box of size100x100x70mm with transparent lid similar to KX 0606 C of Hensel make and fixing it with suitable clamps and supports | — | — | — | 10,12,200 | |
| — | 4.00 | — | — | ||
| Supply of Poly carbonate cable looping box of size 300x450x170mm with transparent lid similar to K0300 of Hensel make with 4 numbers 25x3 copper copper busbar 25cm long mounted on SMC/DMC insulators | — | — | — | 46,748 | |
| — | 4.00 | — | — | ||
| Supply and Fabrication of clamps for fixing polycarbonate cable looping box and fixing of 300x450x175 policarbonate box and fixing of cable looping box at desired location | — | — | — | 7,260 | |
| — | 100.00 | — | — | ||
| Supply and wiring/fixing of 35 sq mm single core PVC insulated copper cable | — | — | — | 1,23,900 | |
| — | 42.00 | — | — | ||
| Supply and fixing of LED type flood light fitting 120 W (+/-5W) having minimum 120 lumen/watt system efficacy similar to Bajaj Model no. PRAZE F 144L WH NB-A5 TG SD as per specification, (Only 75% payment willbe released (70% on supply and 5% on Erection) aftercompletion of supply and erection. Balance 25% will be released on completion of each year guarantee period @ 5% every year) | — | — | — | 5,74,140 | |
| — | 84.00 | — | — | ||
| Supply and fixing of LED type flood light fitting 250 W (+/-5W) having minimum 120 lumen/watt system efficacy similar to Bajaj Model no. as per specification (Only 75% payment willbe released (70% on supply and 5% on Erection) aftercompletion of supply and erection. Balance 25% will be released on completion of each year guarantee period @ 5% every year) | — | — | — | 14,91,756 | |
| — | 20.00 | — | — | ||
| Supply and Concealing of 1.6mm thick modular type GI sheet metal box Without mounting plate and cover plate -2module | — | — | — | 5,140 | |
| — | 130.00 | — | — | ||
| Supply and Concealing of 1.6mm thick modular type GI sheet metal box Without mounting plate and cover plate - 3 module | — | — | — | 37,310 | |
| — | 150.00 | — | — | ||
| Supply and Concealing of 1.6mm thick modular type GI sheet metal box Without mounting plate and cover plate - 4 module | — | — | — | 48,000 | |
| — | 150.00 | — | — | ||
| Supply and Concealing of 1.6mm thick modular type GI sheet metal box Without mounting plate and cover plate - 6 module | — | — | — | 84,750 | |
| — | 120.00 | — | — | ||
| Supply and Concealing of 1.6mm thick modular type GI sheet metal box Without mounting plate and cover plate - 8 module | — | — | — | 73,200 | |
| — | 80.00 | — | — | ||
| Supply and Concealing of 1.6mm thick modular type GI sheet metal box Without mounting plate and cover plate - 12 module | — | — | — | 52,080 | |
| — | 588.00 | — | — | ||
| Supply and fixing of UPVC pipe in gantry uprights | — | — | — | 85,260 | |
| — | 1764.00 | — | — | ||
| Supply and wiring with 3 numbers of 1.5 sq mm PVC insulated copper wire | — | — | — | 2,85,768 | |
| — | 800.00 | — | — | ||
| Supply and wiring including termination of wiring with 2 runs of 4.00 sq. mm PVC insulated copper cable (HRFR/HFFR/FRLSH) TWO wires for a length of 1 m will be taken as 1m for measurement purpose.) | — | — | — | 1,71,200 | |
| — | 650.00 | — | — | ||
| Supply and wiring including termination of wiring with 5 runs of 2.5 sq. mm PVC insulated (FRLSH)copper cable. ( Five wires for a length of 1 m will be taken as 1m for measurement purpose.) | — | — | — | 2,11,250 | |
| — | 650.00 | — | — | ||
| Supply and wiring including termination of wiring with 4 runs of 4.00 sq. mm PVC insulated copper cable (HRFR/HFFR/FRLSH) and one run of 2.5 sq mm cable. (Five wires for a length of 1 m will be taken as 1m for measurement purpose.) | — | — | — | 3,20,450 | |
| — | 10.00 | — | — | ||
| Cutting of concrete surface up to a depth of 10 to 15cm in required width as per site requirement and refilling the slot by M-20 concrete with baby metal (No power supply will be made available by Railway) | — | — | — | 8,690 | |
| — | 650.00 | — | — | ||
| Supply and wiring with Two numbers of 4 sq. mm and one number of 2.5 sq mm PVC insulated copper wire | — | — | — | 1,81,350 | |
| — | 20.00 | — | — | ||
| Supply and wiring with One numbers of 16 sq. mm PVC insulated copper wire | — | — | — | 11,780 | |
| — | 26.00 | — | — | ||
| Supply and fixing of power supply extension box consisting of polycarbonate box with transperent lid Similar to Hensal make model no. KG 9003 equiped with 16 A plug socket and switch along with 20A SP MCB as per specification | — | — | — | 1,77,190 | |
| — | 2.00 | — | — | ||
| Supply and fixing of power supply control Digital time switch similar to Legrand make model no. 412631 and two numbers of 25A 4 NO Contactor similar to Legrand make model no. 412551 as per specification in IP65 whether proof cabinet | — | — | — | 34,554 | |
| — | 28.00 | — | — | ||
| Fabrication, supply and erection of structure bonds | — | — | — | 58,884 | |
| — | 25.00 | — | — | ||
| Supply and erection of a Single earth electrode as per RDSO Drawing no. ETI/OHE/P/7020 | — | — | — | 2,28,525 | |
| — | 10.00 | — | — | ||
| Supply and erection of earth Bus as per specification | — | — | — | 5,380 | |
| — | 2.00 | — | — | ||
| Supply, transportation and stacking of 400A IGBT based Welding set | — | — | — | 1,39,304 | |
| — | 2.00 | — | — | ||
| Fabrication supply and fixing of suitable bracket/stand and Erection testing and commissioning of 400A Welding set | — | — | — | 12,192 | |
| — | 500.00 | — | — | ||
| Transportation of materials | — | — | — | 18,000 | |
| — | 1.00 | — | — | ||
| Erection testing and commissioning of 40KVA servo stabilizer | — | — | — | 3,675 | |
| — | 4.00 | — | — | ||
| Supply erection testing and commissioning of 1 HP sewage pump similar to Kirloskar model no. STPM12 1HP with flote arrangement for automatic pumping | — | — | — | 1,23,200 | |
| — | 4.00 | — | — | ||
| Supply installation testing and commissioning of HVLS fan of 12 feet size | — | — | — | 10,47,476 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC22 with correction slips upto 12
ATTACHMENT
TenderNotice-signed.pdf
ATTACHMENT
606TenderDocumentfinal_.pdf
ATTACHMENT
GCC2022withcorrectionslipno.12-.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].