Construction of Building to accommodate the Narasannapeta Sub-Division Office cum Sub-ERO at 33/11 KV Narasannapeta Sub-Station in Tekkali Division, Srikakulam Circle

Earth work excavation in ordinary soils by manual means upto 3m depth for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308).

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Filling with sand in foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Spreading of Gravel with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work.

Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixer including cost and conveyance of all materials and all labour charges complete. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

Supplying, cutting and placing HYSD bar reinforcement as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including cost and conveyance of all materials to site and all labour charges complete.

Providing Pre construction Anti termite is a process in which 1. chemical toxic to subterranean termites is apply/ inject into soil during early stage of building Construction 2. Treatement of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entryImidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums , plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding etc. complete for furnished item of work as per the approval of the Engineer-in-charge

Brick Masonry in CM (1:5) with Fly ash cement/lime solid blocks with compressive strength of 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5 - 290 x 200 x 140 mm including seignorage charges including cost and conveyance of all materials to site and all labour charges complete. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

Brick Masonry in CM (1:6) with ordinary bricksincluding cost and conveyance of all materials to site and all labour charges complete. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

FOOTINGS RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

PEDESTALS RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

PLINTH BEAMS RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

LINTELS RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

COLUMNS RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

SUNSHADES AND CHAJJAS RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

BEAMS RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

ROOF SLABS RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

Plastering with CM (1:3), 12 mm thick in one coat for inernal faces of ceilings etc.,including cost and conveyance of all materials all labour charges etc, complete.. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

Plastering with CM (1:5), 12 mm thick in one coat for inernal faces of walls, ,including cost and conveyance of all materials all labour charges etc, complete..

Plastering with CM (1:5), 20 mm thick in one coat for external faces of walls including cost and conveyance of all materials all labour charges etc, complete.. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

Laying P.C.C.(1:2:4) using 10 to 12 mm HBG metal including cost and conveyance of all materials to site and all labour charges complete for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

Flooring with vitrified polished floor tiles glossy finish premium colours of size not less than 598x598mmx8mm thickness of 1st quality(make Somany,HR Jhonson,Naveen Ceramics, Kajaria, Nitco, Sphinx) set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work including the cost of conveyance of all materials. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

Flooring with 8mm thick Non-skid edge cut rectified ceramic tiles Ist quality , set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, including the cost of conveyance of all materials. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

Painting with acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ litre exterior grade of approved brand and colour/shade two coats over a base coat of appropriate primer (grade-II) of approved brand, making 3 coats in all to give an even shade after thorughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and convyance of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work.

Painting with synthetic polymer plastic emulsion paint for INTERNAL WALLS having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade two coats over a base coat of waster based cement primer of interior (grade-I) of approved brand, making 3 coats in all to give an even shade after thorughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and convyance of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work.

Providing R.C.C. plates of 38mm thick with R.C.C.(1:1.5:3) (including cost of steel reinforcement ) and plastering with CM(1:5),12mm thick including cost and conveyance of all materials to site and all labour charges complete. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

Providing and fixing factory made uPVCwhite colour sliding glazedwindow upto1.50m in height dimension comprising of uPVC multi chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60±0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & sizeaccording to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks,EPDMgasket,woolpile, zinc alloy(white powder coated) touch locks with hook,zinc alloy body with single nylon rollers(weight bearing capacity to be40kg), G.Ifasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile offrame & sash shall be mitred cut andfusion welded at all corners, including drilling of holes for fixing hardware's and drainage of wateretc. After fixing frame the gap between frame and adjacent finished walls all be filled with weather proof silicon sealent over backer rod of required size and ofapproved quality, all complete as per approved drawing & direction of Engineer -in - Charge inclusive of cost of Single/double glasspanes, wiremesh and silicon sealent .Note: For uPVC frame and sash extruded profiles minus 5%tolerancein dimension i.e. in depth &width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment onthis account shallbemade.

Flush door: supply and fixing of 35 mm thick flush door single shutter, solid bond wood block board type with teak veneer on both faces including 5mm thick glass and supplying positioning and fixing door frame with well seasoned assam teak/beeja sal/sal wood scantlings of size 100 mm x 75 mm, including 6 nos. Of ms 'z' hold fasts of size 250x50x8 mm,including aluminium 3 nos. Of 125 mm butt hinges, 1 no. Door stoper, 2 no. 100 mm long door handles , 1 no. Aldrop of size 250 mm long , 1 nos. Of 200 mm long tower bolts, with bolts, nuts, nf screws including cost and conveyance of all materials to site, labour charges etc., including minor extra fixtures required if any as directed by the engineer-in-chrge of the work complete for finished item of work

Supply and fixing of M.S. grill to Ground floor windows with 10mm square solid rods with 25mm x 25mm x 5mm L Angle and approved design given by the department and as directed by the engineer at site including cost and conveyance of all materials and all labour charges etc.,complete. (1.22X1.22 )

Providing of RCM facia or drop wall 5cm thick in CM (1:3) including seignorage charges with rabbit wire mesh (chicken mesh) of not less than 30gauge & nominal reinforcement as directed by Engineer-in-charge with dubara sponge finishing, including cost & conveyance of all materials to site, scaffolding charges and all labour charges complete. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

Supplying & Fixing Indian pattern white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI Mark: 580 mm x 440mm and PVC flushing tank 10 Lit capacity.

Supply and fixing of European Water Closet of Ist quality with plastic seat and lid and low down flushing tank 10 Lit capacity confirming to IS:2556-Part-2-1973 of Hidustan/Neycer or Parry ware make white glazed with 'S' trap.

Supply and fixing of 110 mm dia (6kg/sqcm) PVC pipes including cost and conveyance of all materials all labour charges etc., complete.

Supply and fixing of 75 mm dia (6kg/sqcm) PVC pipes including cost and conveyance of all materials all labour charges etc., complete.

Supply and fixing Indian make Flat Back Wash Hand basin with pedestal (HSW/Parryware/Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15mm nominal bore chromium plated pillar tap of 1st quality Indian make 400 grams Seiko/Senior/Nice/Esso or equivalent complete with standard CI brackets : 550 x 400 mm - double C.P. Pillar cock.

Supply and laying CPVC pipe 1" dia including cost of PVC pipe, bends, couplings and Running Joints etc., complete.

Supply and laying CPVC pipe 1/2" dia including cost of PVC pipe, bends, couplings and Running Joints etc., complete.

Supply and fixing CP Long body bib cock facy type deluxe heavy duty 12.7mm dia Indian make Seiko/Senior/Nice or equivalent

Supply and fixing CP Short body bib cock facy type deluxe heavy duty 12.7mm dia Indian make Seiko/Senior/Nice or equivalent

Supply and fixing PVC 1" gate valve including cost of PVC pipe, bends, couplings and Running Joints etc., complete.

Supply and fixing of Polyethylene water storage tank double layer conforming to IS:12701-1996 with lid.

Providing and fixing of Wood Polymer Composite (WPC) solid doors with frame. Door shutter consists of Wood Polymer Composite (WPC) solid, frosty white single extruded factory made in 18 MM thickness (Density 650 kg/Cum, Weight 35Kg) and Door Frame consists of solid Wood Polymer Composite (WPC) single extruded section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member and with fixtures 1no aluminium aldrop 200mm lond and 2nos tower bolt 150mm long, the rate is inclusive of cost and conveyance of all materials to site and all labour charges complete.

Supplying and Fixing 76.2 mm Nahny Trap 1st quality in RCC floors

Supply and fixing of soap stands in the washroms including cost and conveyance of all materials, labour charges etc.,

Supply and fixing of 25.4 mm dia& 609.6 mm long aluminium anodized towel rod with brackets and aluminium screws including cost and conveyance of all materials, labour charges etc., complete

Supply and Fixing of 25mm outer dia 1.8mm thick rigid P.V.C. pipe (ISI MARK) of make Sudhakar/Macoplast/Modi with all required accessories like bends, junction box with cover etc., including all labour charges etc., complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A modular switch, Ceiling rose and hot dip galvanized metal boxes with cover frame to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings (makes Anchor / Gold Medal / Million / Vimal / Maru / Milltec.)

Providing 6A modular switch with 3 No 3/2 pin socket, and hot dip galvanized metal boxes with modular cover frame to switch control box including all labour charges etc., complete in Non-Residential Buildings Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Ducor /L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)

Supply and run of 4 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Wiring with 4 runs of 56/0.3mm ( 4.0 Sq.mm) Fire retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing metalic/ Non- metalic conduit pipe for run of mains including all labour charges etc.,from LDB at each floor to the Board.

Supply and fixing of 12 way TPN distribution board ( STI 4w ) concealed in wall including chisiling, masonry work & suitable for single pole out going MCBs in sheet steel enclosure with 1no. 63 A 4 pole Isolator and 8 Nos 6-32A single pole MCBs including (make Hevels/ MDS ) complete for finished item of work as per directions of Eng-in-charge..

Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Supply and fixing of 20W,1900lumens T8,not less than 1100mmlength LED retrofit tube light withaluminium anodised body, inputvoltage AC 220 - 260 Volts withPF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K,minimum CRI>70, .etc., complete as per IS 10322 (Part 5/ Sec 1)..2012 Makes : As per list of recommended brands as category II.

Supply and fixing 48" (1200mm) Sweep Ceiling Fan of makes (Crompton High speed/Bajaj Ultima/Havells Velocity/ Usha Astra/ Orient Summer Pride) with Modular Electronic Regulator of makes (Crab Tree/Feno Swtch/ Toyoma/Fortune Art/ Million / Gold Medal / Vimal / Anchor Roma)

Supply and fixing of LED Lamps with Holder of standard make including cost of all fixture etc., complete.

Supply installation testing and commisioning of1no of Cat6 Tooless builtin crimping mechanism Information Outlet with Dust Cover Exceed ANSI/TIA-568-C.2 and ISO/IEC 11801 standards with 1module face plate for Category 6 component performance & Compatible to T568A,T568B wiring pattern and UL-940V0 Rated Plastic &RoHS Compliant

Supply installation testing and commisioning of 4 pair 23AWG Cat6 UTP ,flexible ,double ended patch cords along with 2 nos of RJ 45 connectors with strain relief boots Compatible to T568A,T568Bspecifications including making connections to information outlets Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand

Supply,laying ,testing and commisioning of 4-pair, Cat6 Solid (Third party ETL Intertek tested 600 MHZ above) to support 1Gbps with Cross (+) filler pair seperator & PVC sheath 23 AWG, STP/UTP Cable , Meets or exceeds ANSI/TIA-568-C.2 and UL Listed &RoHS Compliant in the existing raceways /pvc conduits including making connections to information outlets and patch panels with ferruling at both ends for identifiation with necessary tools for punching stripping crimping and testing required etc., complete Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand

Earth work excavation in ordinary soils by manual means upto 3m depth for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308).

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Filling with sand in foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Spreading of Gravel with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work.

Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixer including cost and conveyance of all materials and all labour charges complete. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

Supplying, cutting and placing HYSD bar reinforcement as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including cost and conveyance of all materials to site and all labour charges complete.

Providing Pre construction Anti termite is a process in which 1. chemical toxic to subterranean termites is apply/ inject into soil during early stage of building Construction 2. Treatement of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entryImidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums , plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding etc. complete for furnished item of work as per the approval of the Engineer-in-charge

Brick Masonry in CM (1:5) with Fly ash cement/lime solid blocks with compressive strength of 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5 - 290 x 200 x 140 mm including seignorage charges including cost and conveyance of all materials to site and all labour charges complete. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

Brick Masonry in CM (1:6) with ordinary bricksincluding cost and conveyance of all materials to site and all labour charges complete. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

FOOTINGS RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

PEDESTALS RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

PLINTH BEAMS RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

LINTELS RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

COLUMNS RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

SUNSHADES AND CHAJJAS RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

BEAMS RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

ROOF SLABS RCC M- 20 Nominal mix (1:1.5:3) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering with wooden scaffolding etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

Plastering with CM (1:3), 12 mm thick in one coat for inernal faces of ceilings etc.,including cost and conveyance of all materials all labour charges etc, complete.. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

Plastering with CM (1:5), 12 mm thick in one coat for inernal faces of walls, ,including cost and conveyance of all materials all labour charges etc, complete..

Plastering with CM (1:5), 20 mm thick in one coat for external faces of walls including cost and conveyance of all materials all labour charges etc, complete.. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

Laying P.C.C.(1:2:4) using 10 to 12 mm HBG metal including cost and conveyance of all materials to site and all labour charges complete for finished item of work. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

Flooring with vitrified polished floor tiles glossy finish premium colours of size not less than 598x598mmx8mm thickness of 1st quality(make Somany,HR Jhonson,Naveen Ceramics, Kajaria, Nitco, Sphinx) set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work including the cost of conveyance of all materials. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

Flooring with 8mm thick Non-skid edge cut rectified ceramic tiles Ist quality , set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, including the cost of conveyance of all materials. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

Painting with acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ litre exterior grade of approved brand and colour/shade two coats over a base coat of appropriate primer (grade-II) of approved brand, making 3 coats in all to give an even shade after thorughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and convyance of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work.

Painting with synthetic polymer plastic emulsion paint for INTERNAL WALLS having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade two coats over a base coat of waster based cement primer of interior (grade-I) of approved brand, making 3 coats in all to give an even shade after thorughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and convyance of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work.

Providing R.C.C. plates of 38mm thick with R.C.C.(1:1.5:3) (including cost of steel reinforcement ) and plastering with CM(1:5),12mm thick including cost and conveyance of all materials to site and all labour charges complete. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

Providing and fixing factory made uPVCwhite colour sliding glazedwindow upto1.50m in height dimension comprising of uPVC multi chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60±0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & sizeaccording to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks,EPDMgasket,woolpile, zinc alloy(white powder coated) touch locks with hook,zinc alloy body with single nylon rollers(weight bearing capacity to be40kg), G.Ifasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile offrame & sash shall be mitred cut andfusion welded at all corners, including drilling of holes for fixing hardware's and drainage of wateretc. After fixing frame the gap between frame and adjacent finished walls all be filled with weather proof silicon sealent over backer rod of required size and ofapproved quality, all complete as per approved drawing & direction of Engineer -in - Charge inclusive of cost of Single/double glasspanes, wiremesh and silicon sealent .Note: For uPVC frame and sash extruded profiles minus 5%tolerancein dimension i.e. in depth &width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment onthis account shallbemade.

Flush door: supply and fixing of 35 mm thick flush door single shutter, solid bond wood block board type with teak veneer on both faces including 5mm thick glass and supplying positioning and fixing door frame with well seasoned assam teak/beeja sal/sal wood scantlings of size 100 mm x 75 mm, including 6 nos. Of ms 'z' hold fasts of size 250x50x8 mm,including aluminium 3 nos. Of 125 mm butt hinges, 1 no. Door stoper, 2 no. 100 mm long door handles , 1 no. Aldrop of size 250 mm long , 1 nos. Of 200 mm long tower bolts, with bolts, nuts, nf screws including cost and conveyance of all materials to site, labour charges etc., including minor extra fixtures required if any as directed by the engineer-in-chrge of the work complete for finished item of work

Supply and fixing of M.S. grill to Ground floor windows with 10mm square solid rods with 25mm x 25mm x 5mm L Angle and approved design given by the department and as directed by the engineer at site including cost and conveyance of all materials and all labour charges etc.,complete. (1.22X1.22 )

Providing of RCM facia or drop wall 5cm thick in CM (1:3) including seignorage charges with rabbit wire mesh (chicken mesh) of not less than 30gauge & nominal reinforcement as directed by Engineer-in-charge with dubara sponge finishing, including cost & conveyance of all materials to site, scaffolding charges and all labour charges complete. (with variable initial cost of sand and for details refer the Lead statement of Bid Document)

Supplying & Fixing Indian pattern white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI Mark: 580 mm x 440mm and PVC flushing tank 10 Lit capacity.

Supply and fixing of European Water Closet of Ist quality with plastic seat and lid and low down flushing tank 10 Lit capacity confirming to IS:2556-Part-2-1973 of Hidustan/Neycer or Parry ware make white glazed with 'S' trap.

Supply and fixing of 110 mm dia (6kg/sqcm) PVC pipes including cost and conveyance of all materials all labour charges etc., complete.

Supply and fixing of 75 mm dia (6kg/sqcm) PVC pipes including cost and conveyance of all materials all labour charges etc., complete.

Supply and fixing Indian make Flat Back Wash Hand basin with pedestal (HSW/Parryware/Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15mm nominal bore chromium plated pillar tap of 1st quality Indian make 400 grams Seiko/Senior/Nice/Esso or equivalent complete with standard CI brackets : 550 x 400 mm - double C.P. Pillar cock.

Supply and laying CPVC pipe 1" dia including cost of PVC pipe, bends, couplings and Running Joints etc., complete.

Supply and laying CPVC pipe 1/2" dia including cost of PVC pipe, bends, couplings and Running Joints etc., complete.

Supply and fixing CP Long body bib cock facy type deluxe heavy duty 12.7mm dia Indian make Seiko/Senior/Nice or equivalent

Supply and fixing CP Short body bib cock facy type deluxe heavy duty 12.7mm dia Indian make Seiko/Senior/Nice or equivalent

Supply and fixing PVC 1" gate valve including cost of PVC pipe, bends, couplings and Running Joints etc., complete.

Supply and fixing of Polyethylene water storage tank double layer conforming to IS:12701-1996 with lid.

Providing and fixing of Wood Polymer Composite (WPC) solid doors with frame. Door shutter consists of Wood Polymer Composite (WPC) solid, frosty white single extruded factory made in 18 MM thickness (Density 650 kg/Cum, Weight 35Kg) and Door Frame consists of solid Wood Polymer Composite (WPC) single extruded section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member and with fixtures 1no aluminium aldrop 200mm lond and 2nos tower bolt 150mm long, the rate is inclusive of cost and conveyance of all materials to site and all labour charges complete.

Supplying and Fixing 76.2 mm Nahny Trap 1st quality in RCC floors

Supply and fixing of soap stands in the washroms including cost and conveyance of all materials, labour charges etc.,

Supply and fixing of 25.4 mm dia& 609.6 mm long aluminium anodized towel rod with brackets and aluminium screws including cost and conveyance of all materials, labour charges etc., complete

Supply and Fixing of 25mm outer dia 1.8mm thick rigid P.V.C. pipe (ISI MARK) of make Sudhakar/Macoplast/Modi with all required accessories like bends, junction box with cover etc., including all labour charges etc., complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A modular switch, Ceiling rose and hot dip galvanized metal boxes with cover frame to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings (makes Anchor / Gold Medal / Million / Vimal / Maru / Milltec.)

Providing 6A modular switch with 3 No 3/2 pin socket, and hot dip galvanized metal boxes with modular cover frame to switch control box including all labour charges etc., complete in Non-Residential Buildings Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Ducor /L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)

Supply and run of 4 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Wiring with 4 runs of 56/0.3mm ( 4.0 Sq.mm) Fire retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing metalic/ Non- metalic conduit pipe for run of mains including all labour charges etc.,from LDB at each floor to the Board.

Supply and fixing of 12 way TPN distribution board ( STI 4w ) concealed in wall including chisiling, masonry work & suitable for single pole out going MCBs in sheet steel enclosure with 1no. 63 A 4 pole Isolator and 8 Nos 6-32A single pole MCBs including (make Hevels/ MDS ) complete for finished item of work as per directions of Eng-in-charge..

Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Supply and fixing of 20W,1900lumens T8,not less than 1100mmlength LED retrofit tube light withaluminium anodised body, inputvoltage AC 220 - 260 Volts withPF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K,minimum CRI>70, .etc., complete as per IS 10322 (Part 5/ Sec 1)..2012 Makes : As per list of recommended brands as category II.

Supply and fixing 48" (1200mm) Sweep Ceiling Fan of makes (Crompton High speed/Bajaj Ultima/Havells Velocity/ Usha Astra/ Orient Summer Pride) with Modular Electronic Regulator of makes (Crab Tree/Feno Swtch/ Toyoma/Fortune Art/ Million / Gold Medal / Vimal / Anchor Roma)

Supply and fixing of LED Lamps with Holder of standard make including cost of all fixture etc., complete.

Supply installation testing and commisioning of1no of Cat6 Tooless builtin crimping mechanism Information Outlet with Dust Cover Exceed ANSI/TIA-568-C.2 and ISO/IEC 11801 standards with 1module face plate for Category 6 component performance & Compatible to T568A,T568B wiring pattern and UL-940V0 Rated Plastic &RoHS Compliant

Supply installation testing and commisioning of 4 pair 23AWG Cat6 UTP ,flexible ,double ended patch cords along with 2 nos of RJ 45 connectors with strain relief boots Compatible to T568A,T568Bspecifications including making connections to information outlets Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand

Supply,laying ,testing and commisioning of 4-pair, Cat6 Solid (Third party ETL Intertek tested 600 MHZ above) to support 1Gbps with Cross (+) filler pair seperator & PVC sheath 23 AWG, STP/UTP Cable , Meets or exceeds ANSI/TIA-568-C.2 and UL Listed &RoHS Compliant in the existing raceways /pvc conduits including making connections to information outlets and patch panels with ferruling at both ends for identifiation with necessary tools for punching stripping crimping and testing required etc., complete Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand