Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹44.3 L
EMD Value
₹44,400
Closing Date
2 Dec 2026, 2:30 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer (Central Tender Cell)
Central Tender Cell, BMC, ICOMC Tower, Unit-9, Satyanagar
Provision of streetlight from Hanspal square (Puri Canal) to Balianta Market in Ward No. 04.
2026_ORULB_146811_2
BMC-EE-Tender Cell-96/2026-27 dt. 18.11.2026
Open Tender
Electrical Works
Percentage
60 days
BMC AREA
Please refer Tender documents.
2 documents required · 2 mandatory
₹6,000
₹44,400
Yes
Office Chamber of EE(Electrical)
21 Nov 2026
21 Nov 2026
2 Dec 2026
21 Nov 2026
2 Dec 2026
21 Nov 2026
21 Nov 2026 - 25 Nov 2026
25 Nov 2026
120 days
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply and installation of 12.5 Mtr high internally & externally Hot Dip Galvanized High Mast shaft in two sections, top shaft made up of 3mm thick and bottom shaft in 4mm thick HT Steel sheet conforming to grade S355JO, E350. The shaft shall be continuously tapered made of as per Dimension: Top Dia . - 150 mm, Bottom Dia . - 360 mm. Base Plate - 520mm Dia x 25 mm thick shall be welded (inside & outside) with shaft. High mast is Structurally suitable to accommodate 6 to 9 Nos LED Flood Light in symmetrical orientation at a wind speed of 180km per hour as per IS 875. Supply of 6Nos M24 x 750 mm long bolts with template and anchor plate for fixing of mast with foundation. Highmast shall be supplied along with all accessories like 1HP 3Phase Motor, Double Drum winch , 6mm Dia SS Rope , 5Cx4Sqmm Trailing Cable , Lightning Finial , manual handle , nuts and bolts etc. (Make- Utkal Galvanizers, Utkarsh, Bajaj/ Crompton/RR Ispat) (Hinged door for JB) | 3 | No. | 1,85,000 | ₹5,55,000 |
| 2 | Construction of R.C.C foundation for errection of 12.5 Mtr High Mast Light (Detailed specification given by EIC before start the work) | 3 | No. | 27,656 | ₹82,968 |
| 3 | Supply & fixing of outdoor stand mounted Feeder Panel with 32A TPN MCB incomer, with timer switch, auto on / off & Power tool control contactor and raise lower push bottom suitable for 3 - Ph 4wire 415V Power Supply | 3 | No. | 35,000 | ₹1,05,000 |
| 4 | Supply & fixing of Twin Dome LED Aviation obstruction Lamp (IP - 66) | 3 | No. | 5,600 | ₹16,800 |
| 5 | Supply and installation of 8 Mtr long internally and externally Hot Dip Galvanized Octagonal pole made up of top dia 70 mm & bottom dia 155 mm and 3 mm thick HT Steel sheet conforming to grade S355JO, E350 with weather proof and vandal resistant pole. Base Plate Size 260X260X16 mm thick shall be welded (Inside & outside) with pole shaft, 4 Nos M20X700mm long J Bolt along with Temp plate, 3 Nos Nut & washer, including inbuild JB (Hinged door), containing (SP MCB, Terminal Stud, Backlite Sheet, SS hardwire Etc). (Make- Utkal Galvanizers, Utkarsh, Bajaj/ Crompton/RR Ispat) | 52 | No. | 18,100 | ₹9,41,200 |
| 6 | Supply & fixing of Hot dip Galvanized 1 Mtr. Long Double arm 50mm bracket suitable for carrying different wattage Street light for Octagonal pole. (Make- Utkal Galvanizers, Utkarsh, Bajaj/ Crompton/RR Ispat). (Arm design given by E-I-C) | 47 | No. | 2,500 | ₹1,17,500 |
| 7 | Supply & fixing of 48.4MM OD HDG ROUND Arm (1 Mtr Long) for Triple arm bracket suitable for carrying different wattage Street light for Octagonal pole (Make- Utkal Galvanizers, Utkarsh, Bajaj/ Crompton/RR Ispat). (Arm design given by E-I-C) | 5 | No. | 3,650 | ₹18,250 |
| 8 | Foundation for 8 Mtr Octagonal pole
Specification:-
(a) Earth work in excavation of foundation in hard soil within 50m initial lead & 1.5 M initial lift including rough dressing and levelling the bed and depositing the excavated materials away from the working areas as directed by the Engineer-in-Charge. (b) Quarrying, collecting, supplying, filling sand from local area with all leads, lifts and delifts or by mechanical means including cost and conveyance of all materials etc. and spreading the same in layers not exceeding 0.30 mtr. depth for compaction as per direction of Engineer-in-Charge (c) P.C.C of (1:3:6 ) with 40 cm down H.G.C.B metal including hoisting, laying, compacting, curing and watering etc. with all T & P required for the work including cost conveyance royalty and all other taxes of materials complete in all respect as per Engineer-in-charge. (d) R.C.C. M-25 with 20 mm. downgraded black hand granite crushed broken stone chips including cost and conveyance of all materials with all taxes, royalty, labour and T&P required for the work etc. complete as directed by the Engineer-in-Charge. (e) Supply M.S reinforcement for R.C.C.work including cutting, bending, binding and straightening with cost conveyance, labour, T &P, all taxes of M.S. rod including cost of binding wire 18 to 20 gauge. (f) Rigid and smooth cantering and shuttering for R.C.C. work including false works and dismantling them after casting including cost of materials complete in ground floors.R.C.C. foundation, plinth band footing base of column. (g) 16 mm thick cement plaster in cement mortor (1:6) over brick masonry including cost and conveyance of all materials with all the taxes, royalty, labour, T & P required for the work materials etc. complete as directed by the Engineer-in-charge. (h) Priming one coat with approved Water bound cement primer including cost of Primer. (i) Finishing walls with water proofing cement paint of approved shade in new work two coats to give an even shade including cost of paint. | 52 | No. | 3,872 | ₹2,01,344 |
| 9 | Supply & Installation of 150 Watt ratings Flood light with batwing spread in grey corrosion free powder coated aluminium pressure die-cast housing (ADC 12). The IP 66 (ingress protection) and IK10 (impact resistance) heat resistance polycarbonate with potted non-dimmable electronic driver should deliver an operating input voltage range of driver (volts) 140-275 VAC , Operating input frequency range of driver ( Hz) 50 Hz-60 Hz, Operating Temperature-10°C to 55°C, Driver Power Factor ≥ 0.90, Driver THD ≤10%, Driver efficiency≥90% and an inbuilt surge protection of 5KV and additional surge protection of 20 KV/10KA with working humidity range should be 0-95%. The streetlight should come with LEDs of CREE/Osram/Lumiled make with a LED Chip level efficacy of at least ≥190 lumens per watt and a system efficacy ≥ 150 lumens per watt with a CRI ≥70(±2) and CCT of 5700K -6500K (IESNA tolerance). The UV resistant polycarbonate 120° lens should provide a focused photometry to provide uniform lighting. The LED life span should be ≥50,000 Hours, Higher voltage Auto Cut- off ≥320 VAC with Phase-to-Phase sustainability of 8 Hours with short Circuit Protection and Reverse Polarity Protection. LED streetlight must have BS Certification. The fittings should be connecting through a 3 C Cup. Cable i.e, R Y E Connection Options. Minimum Warranty of the fitting should be 5 year & the company should be maintain 7 year spare in Bhubaneswar service centre. (Make-Havells/ Cromption/ wipro/ Philips) (As per direction of E-I-C) | 24 | No. | 11,379 | ₹2,73,096 |
| 10 | Supply & Installation of 120 Watt ratings Streetlight with batwing spread in grey corrosion free powder coated aluminium pressure die-cast housing (ADC 12). The IP 66 (ingress protection) and IK10 (impact resistance) heat resistance polycarbonate with potted non-dimmable electronic driver should deliver an operating input voltage range of driver (volts) 140-275 VAC , Operating input frequency range of driver ( Hz) 50 Hz-60 Hz, Operating Temperature-10°C to 55°C, Driver Power Factor ≥ 0.90, Driver THD ≤10%, Driver efficiency≥90% and an inbuilt surge protection of 5KV and additional surge protection of 20 KV/10KA with working humidity range should be 0-95%. The streetlight should come with LEDs of CREE/Osram/Lumiled make with a LED Chip level efficacy of at least ≥190 lumens per watt and a system efficacy ≥ 150 lumens per watt with a CRI ≥70(±2) and CCT of 5700K -6500K (IESNA tolerance). The UV resistant polycarbonate 120° lens should provide a focused photometry to provide uniform lighting. The LED life span should be ≥50,000 Hours, Higher voltage Auto Cut- off ≥320 VAC with Phase-to-Phase sustainability of 8 Hours with short Circuit Protection and Reverse Polarity Protection. LED streetlight must have BS Certification. The fittings should be connecting through a 3 C Cup. Cable i.e, R Y E Connection Options. Minimum Warranty of the fitting should be 5 year & the company should be maintain 7 year spare in Bhubaneswar service centre. (Make-Havells/ Cromption/ wipro/ Philips) (As per direction of E-I-C) | 109 | No. | 9,367 | ₹10,21,003 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
DTCN_96.pdf
Tender Documents • 0.94 MB
BOQ_622375.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .