Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.9 LAccepted-Finance | ₹13.9 L | L1 | Accepted-Finance Due to lowest rate |
| 2 | L2₹14 L+₹12,500 (0.90%)Rejected-Finance VILLAGE PO NAGANPATT TEHSIL D SALA DISTT KANGRA HP | ₹14 L+₹12,500 (0.90%) | L2 | Rejected-Finance Due to highest rate |
| 3 | L3₹14.3 L+₹47,500 (3.42%)Rejected-Finance VILLAGE DHUNDHIYARA P O BELLI TEHSIL DALHOUSIE DISTT CHAMBA HP | ₹14.3 L+₹47,500 (3.42%) | L3 | Rejected-Finance Due to highest rate |
| 4 | Not Admitted-Fee/PreQual/Technical HAMIRPUR ROAD NEAR BUS STAND UNA DISTT UNA HP | UNA | HIMACHAL PRADESH | 174301 | - | - | Not Admitted-Fee/PreQual/Technical Others-The contractor has submit an applicaton on dated 26/07/2026 vide which he has requested to do not open his tender due to quoted some wrong rates |
| Sl No | Description | Qty | Unit | M/S POLLY PHASE NEW ENGINEERING L1 | SIKANDER KUMAR L2 | ANITA KUMARI L3 |
|---|---|---|---|---|---|---|
| 1.00 | Supply of horizontal spindle,horizontal/radial split casing and suction (backpull out arrangement) single/ double / multistage centrifugal pumps (75 HP) or combination of pumps in series /parallel of KSB / Mather & Platt/ Jyoti /Kirloskar /BE /Maxflow/ Beaconweir Sabar make conforming to BIS: 1520-1980 (latestwith upto date ammendments) read with BIS: 9137-1978 (latest edition) suitable for lifting clear water of under mentioned charactristics with bronze impellers/ priming funnels,casing ring & shaft sleeves of bronze/ suitable alloy, shaft of sutable steel grade EN-8with cast iron casing coupled directly through a flexible coupling on a MS/ C.I. base plate (base plate to be from the principle manufacturer of pumping set) to slippering/squirrel cage screen protected drip proof electric induction motor of Kirlokar /NGEF/Crompton / Siemen /Jyoti /BHEL /GEC /ABB/Lubi and suitable for operation on 400(+)/-) 10% volts, 50 cycle /second,3 phase AC electric suply. The power of electric motor should be at least 10% in excess of the maximum power required by the pump in the operation range of (+) 10% and (-) 25% of the duty point head . The motor should conforming to BIS: 325-1978 read with BIS: 900-1968 (latest with upto date ammendments) It should include the cost of bearings, nuts & bolts,painting etc. and shall be suitable for operation as per data given below. | 1 | Set | 13,87,500 ₹13,87,500 Lowest | 14,00,000 ₹14,00,000 | 14,35,000 ₹14,35,000 |
| 1.01Total Head. = 190 mtr. | ||||||
| 1.02Discharge required from each pump. =16 LPS | ||||||
| 1.03nos. of pump required. = 1 Nos. | ||||||
| 1.04Dia of Rising main. = 150mm | ||||||
| 1.05No. of working hours per day. = 8.00 hours. | ||||||
| 1.06Test run. = 16 Hours. | ||||||
Tender Value
₹7.5 L
EMD Value
₹15,000
Closing Date
24 Jul 2026, 11:00 amClosed
Executive Engineer
Jal Shakti Division Shahpur
Supply and errection of centrifugal pumping machinery for LWSS Lunj Noushera under Secton Lunj 1 No (75 HP
2026_HPIPH_138978_1
SHP/KNG15-754/EA-I/NIT/2026- 3402-51 dt 13/07/2026
Open Tender
Civil Works
Item Rate
60 days
Manai
Please refer Tender documents.
6 documents required · 6 mandatory
₹350
Executive Engineer
₹15,000
24 Aug 2026
14 Jul 2026
24 Jul 2026
14 Jul 2026
24 Jul 2026
14 Jul 2026
14 Jul 2026 - 24 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply of horizontal spindle,horizontal/radial split casing and suction (backpull out arrangement) single/ double / multistage centrifugal pumps (75 HP) or combination of pumps in series /parallel of KSB / Mather & Platt/ Jyoti /Kirloskar /BE /Maxflow/ Beaconweir Sabar make conforming to BIS: 1520-1980 (latestwith upto date ammendments) read with BIS: 9137-1978 (latest edition) suitable for lifting clear water of under mentioned charactristics with bronze impellers/ priming funnels,casing ring & shaft sleeves of bronze/ suitable alloy, shaft of sutable steel grade EN-8with cast iron casing coupled directly through a flexible coupling on a MS/ C.I. base plate (base plate to be from the principle manufacturer of pumping set) to slippering/squirrel cage screen protected drip proof electric induction motor of Kirlokar /NGEF/Crompton / Siemen /Jyoti /BHEL /GEC /ABB/Lubi and suitable for operation on 400(+)/-) 10% volts, 50 cycle /second,3 phase AC electric suply. The power of electric motor should be at least 10% in excess of the maximum power required by the pump in the operation range of (+) 10% and (-) 25% of the duty point head . The motor should conforming to BIS: 325-1978 read with BIS: 900-1968 (latest with upto date ammendments) It should include the cost of bearings, nuts & bolts,painting etc. and shall be suitable for operation as per data given below. | 1 | Set | - | - |
| 1.01 | Total Head. = 190 mtr. | - | - | - | - |
| 1.02 | Discharge required from each pump. =16 LPS | - | - | - | - |
| 1.03 | nos. of pump required. = 1 Nos. | - | - | - | - |
| 1.04 | Dia of Rising main. = 150mm | - | - | - | - |
| 1.05 | No. of working hours per day. = 8.00 hours. | - | - | - | - |
| 1.06 | Test run. = 16 Hours. | - | - | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.80 MB
Form6and8.pdf
Tender Documents • 0.80 MB
BOQ_205844.xls
BOQ • 0.23 MB
Termsandconditions.pdf
Tender Documents • 0.17 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .