DMD Fund 2023 Puthoormadam Kundankulangara Road from ch.0/630 to 0/850 in Perumanna GP General civil work

Amount

ROAD RENNOVATION FROM CH:0/630 TO CH:0/780

3.1:Preparation of Foundation for Embankment <br> Scarifying Existing Granular Surface to a Depth of 50 mm by Manual Means<br> Scarifying existing granular surface to a depth of 50 mm and disposal of scarified material with a lift upto 3 m and leads upto 1000 m as per Technical Specification Clause 301.4.

OD79924/2023-2024:Filling with Quarry Muck- Filling up Low Lying and Water Logged Areas with Local Material/ Quarry Muck, Spreading in Layers, Leveling the Top at Site and Consolidation by Ramming, etc Complete for Improving the CBR value of Subgrade

4.1.A.1:Granular Sub-base with Well Graded Material (Table 400.1) <br> (A) By Mix in Place Method <br> Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. <br> (i) For Grading I Material

4.9:Wet Mix Macadam <br> Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. <br> By Mechanical Means with 1 km lead

75.5.1.1pb:Prime Coat - Low porosity - With Packed Bitumen Rates <br> Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502

75.5.2.3pb:Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.

75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates <br> Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 <br> By Manual Means <br> Type A <br> (II) Bitumen (S-65)

OD79929/2023-2024:Fabricating And Fixing of "Name Board" Using MS Angles and MS Sheet With Painting And Lettering,Including All Expences of Board Using Angle ISA 30 mm x 30 mm X 5 mm (Unit Weight 1.8) as Horizontal Frame and ISA 25 mm X 25 mm X 5 mm (Unit Weight 1.20) as Verticals (Size of Board 0.90 m X 0.60 m ) ISA Post as 40 mm X 40 mm X 5 mm (Unit Weight 2.00) 1 mm Thick G I Sheet as Board etc Complete...,

DHARMADAS K

Bidder Name

DHARMADAS K

M.K KUNHAMU