Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹29.3 LAdmitted-Finance | -11.50% | ₹29.3 L | L1 | Admitted-Finance |
| 2 | L2₹31.5 LAdmitted-Finance B 156 BASEMENT LAJPAT NAGAR IV NEW DELHI DELHI 110024 UDYAM DL 08 0013503 | SOUTH EAST DELHI | DELHI | 110024 | -4.98% | ₹31.5 L | L2 | Admitted-Finance |
| 3 | L3₹32.4 LAdmitted-Finance GROUND FLOOR G 1154 A MANSAROVAR PARK SHAHDARA DELHI 110032 | SHAHDARA | DELHI | 110032 | -2.11% | ₹32.4 L | L3 | Admitted-Finance |
| 4 | Not Admitted-Fee/PreQual/Technical | - | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| 5 | Not Admitted-Fee/PreQual/Technical 15 119 DAKHINPURI NEW DELHI 110062 | SOUTH | DELHI | 110062 | - | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹33.1 L
EMD Value
₹66,244
Closing Date
6 Feb 2026, 3:00 pmClosed
Executive Engineer (E)
EEE PWD DHC and ND/Central G.F. MSO Bldg. ND
1) MOEI and Fans and RMO Pump sets, AC equipment, DG set installed at CPO Building, Kashmere Gate, Delhi. 2) MOEI and fans and RMO Pump Sets, AC equipment installed at Sub-Registrar office , Kashmere Gate, Delhi. 3 MOEI and Fans and Compound light an
2026_PWD_285987_1
222/EEE/PWDDHC,NDC2025-26
Open Tender
Electrical Works
30 days
New Delhi
Please refer Tender documents.
16 documents required · 16 mandatory
₹0
₹66,244
10 Feb 2026
31 Jan 2026
6 Feb 2026
31 Jan 2026
6 Feb 2026
31 Jan 2026
SH:-I for EI Works Supplying, Installation, Testing and Commissioning of Air Cooled Floor standing Tower type split Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 5 Mtr (IDU to ODU), copper power cable upto 5.5 Mtr (IDU to ODU), i/c drain pipe of suitable length and size. R-32/R-410/R-407C Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary with min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). as specified. The system shall be able to deliver 100% of the rated capacity as per relevant IS Code. The lab testing reports as per IS: 1391 shall be submitted from National Accreditation Board for Testing and Calibration Laboratories (NABL) accredited as per International Electrotechnical Commission (IEC) 17025 standards /Central Power Research Institute (CPRI)/ Electrical Research and Development Association (ERDA)with Original Equipment Manufacturer (OEM) etc. complete as per CPWD specification and as per IS: 1391 as required. (a) 3.3 TR BEE 4 Star Rating
Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature). (a) 2.0 TR BEE 5 Star Rating
S.I.T.C. of 11 fins oil Filled type radiator (Room Heater) having 2900W, 3 heat setting with thermostat suitable for 230 V, 50 Hz, AC supply i/c connection, testing complete etc. as reqd.
S.I.T.C. of halogen Room Heater having 800W/1200w setting with thermostat suitable for 230 V, 50 Hz, AC supply i/c connection, testing complete etc. as reqd.
Supplying, Installation, testing and commissioning of passive cum active technology based air purifiers with 6 stage purification process through cleanable pre-filter, H14 Hepa filter, IV 1100 active carbon filter, TiO2 photo Catalyst filter, UV lamp sterilization plasma ionizer suitable for elimination air borne micro organisms, pathogens, mild odour, VOC and reduce dust particle/ particulate matter/PM2.5, dust sensors, suitable for coverage area of 700-850 sqft. air flow of 620 CMH with real time PM 2.5,temperature, humidity display for use on 230 V 50 Hz single phase supply oscillating type, complete as required.
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. 6.01) Group C
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 7.01) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
7.02) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. 8.01) Group C
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 9.01) 3 x 1.5 sq. mm
9.02) 3 x 4 sq. mm
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 10.01) 20 mm
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 11.01) 5/6 amps switch
11.02) 15/16 amp switch
11.03) 3 pin 5/6 amp socket outlet
11.04) 6 pin 15/16 amp socket outlet
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 17.01) Single pole
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
Brush Less Direct Current (BLDC) Fan with RemoteSupply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req. 20.01) 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum)
Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 21.01) 100 mm width X 50 mm depth X 1.6 mm thickness
Supplying and installing following size of perforated pre-painted M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 22.01) 100 mm width X 50 mm depth X 1.6 mm thickness
SH:-II for SITC of Computer system along with associated UPS system & printers Supplying, Installation, Testing & Commissioning of All-in-One computer system having following specifications :- Processor:- Intel core Ultra 7, 13th Generation processor Memory :- 16 GB DDR4-3200 MHz RAM(2X8GB) Storage :- 1TB PCIe NVMe M.2 SSD Display :- 27'' inch (68.58cm) diagonal FHD(1920X1080) including mouse , keyboard etc complete as required.
Supplying, Installation, Testing & Commissioning of Laptop system having following specifications :- Processor:- Intel core Ultra 7 ,13th Generation processor Memory :- 16 GB DDR4-3200 MHz RAM(2X8GB) Storage :- 1TB PCIe NVMe M.2 SSD Display :- 15''diagonal FHD(1920X1080) etc complete as required.
Supplying, installation, testing and commissioning of Laser Jet multifunction A4 Printer i.e., print, scan, copier, autoduplex printing , Wireless Printing etc complete as required.
Supplying, installation, testing and commissioning of Microtek 650 VA UPS with 12V 7Ah battery etc complete as required.
Supplying, Installation, Testing & Commissioning of Tablet (Apple-iPad OS)-Apple Ipad Pro ,512 GB storage with 10.9 or 11 inch (wifi),including Apple Pencil,Magic Keyboard , Apple smart Folio,USB-C type Power Adapter, USB-C type Charging cable and Screen protecter etc complete as required.
Supplying, Installation, Testing & Commissioning of Tablet(Andriod) with 13.1 inch,8 GB RAM,128 GB storage wifi+calling, including S- Pen, ,back cover, USB-C type Power Adapter, USB-C type Charging cable and Screen protecter etc complete as required.
Supplying, Installation, Testing & Commissioning of Andriod Device with Dimensions 0.56 x 13.26 x 15.35 cm,12 GB RAM,256 GB storage wifi+calling, including ,back cover, USB-C type Power Adapter, USB-C type Charging cable and Screen protecter etc complete as required.
Supplying and providing of128 GB Pen Drive 3.0 with etc complete as required.
Supplying, Installation, Testing & Commissioning of Microsoft office Home and Business 2024 Licensed version etc complete as required.
Supplying, Installation, Testing & Commissioning of Microsoft office Home and Business 2024 Licensed version etc complete as required. 32.01 ) AC (Tower/split assorted.)
32.02) Electrical dismantle during in this work like wire, cable, pvc conduit, switch, socket etc
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.02 MB
BOQ_378529.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid