REPAIR TO INTERNAL WATER SUPPLY, TILING, WATER PROOFING TREATMENT OF ROOF, FASIA ETC. AND REPAIR TO WOODEN, STEEL, ALUMINUM JOINERY ETC AND OTHER CONNECTED WORKS AT AF STN SAMANA

Amount

Dismantling floor, hearth, wall tiling or marbles including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in Cement Plaster 1:6 complete all as specified and directed.

M&L Rendering 10mm thick in Cement Plaster 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L for Glazed ceramic white tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for light shade Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors/dado /skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L 15 -18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite; laid over complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

M&L Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble of any shade other than white and black complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F in replacement Tubes, 'light grad', 15mm bore, galvanised, with all fitting; laid in trenches,wallor floor complete all as specified and directed

S&F in repair 20mm bore CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Cutting chases, pinning in, making good to facings on stone concrete, block or slab walls and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed

S&F in repair 15mm size angular cock, cast copper alloy, CP fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed

S&F in repairs 15 mm size Stop valves, cast copper alloy,fancy type, chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs fancy type, chromium plated, long shank & cup (concealed type) 15mm bore dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F in repair 15mm dia size Bib taps, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repair 15 mm bore dia Pillar taps,fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

S&F in repair 15 mm bore dia Pillar taps,swan type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

S&F in repair 15 mm dia, Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed

S&F in repair chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge

S&F in repair Chromium Plated Grating doom 100mm dia complete all as specified and directed.

S&F in repair PVC (SWR) pipes dia 75mm single socketed,,in any length with rubber ring joints fixed to walls or floors including complete connection all as specified and directed

S & F in repairs 75 mm bore of pipe PVC (SWR) bends of any radius e fixed to PVC pipes complete all as specified and directed by Engineer-in-Charge

S&F in repair PVC (SWR) pipes dia 110mm single socketed,,in any length with rubber ring joints fixed to walls or floors including complete connection all as specified and directed

S & F in repairs 110 mm bore of pipe PVC (SWR) bends of any radius e fixed to PVC pipes complete all as specified and directed by Engineer-in-Charge

S&F in repair white vitreous china wash hand basin (Flat back) of size 550x400mm fixed on and including new brackets complete in, 32mm size brass chromium plated wastes coupling, 900mm long PVC waste pipe, PVC connection pipe, 15mm size and 450mm long with PTMT nuts and washer at both end etc complete all as specified and directed

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair 10 Litre capacity Flushing cistern and flushing pipe, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets fixed in position and connecting complete all as specified and directed

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed

S&F in repairs 15 mm size Gun-metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repairs 20 mm size Gun-metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

Dismantling water tanks exc 250 ltr and n.exc 500 ltr and removing to store complete all as specified and directed

S&F 500 ltrs capacity, 3 layered, Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed complete all as specified and directed

Dismantling water tanks exc 500 ltr and n.exc 1000 ltr and removing to store complete all as specified and directed

S&F 1000 ltrs capacity, 3 layered, Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed

S&F in repairs PVC cabinet with mirror, of size 350 mm x 450 mm, fixed to wall with screws complete all as specified and directed

S&F in repairs PVC waste pipe flexible type suitable for couplings 32 / 40 mm dia and 750 mm long complete all as specified and directed

S&F in repairs bore dia of 32/40mm, Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms) complete all as specified and directed

S&F in repairs bore dia of 32mm , Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/40mm-270 gms) complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 100 mm of size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge

S&F in repair 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm-690 gms) complete all as specified and directed

S&F in repairs Cast iron floor trap, with grating,outlet dia 75mm including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) complete all as specified and directed

S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete as specified and directed.

S & F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.

S & F in repair Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed

S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed by Engineer-in-Charge

S&F in replacement Kitchen plate rack made of stainless steel not less than 1mm thick with fixing acessories, overall size 600mm x 600mm x 250 mm , complete all as specified and directed by Engineer-in-Charge

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white with CI 'P' or 'S' trap including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc.complete including necessary PVC waste pipe fitting, complete all as specified and directed by Engineer-in-Charge

S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed by Engineer-in-Charge

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed

S&F in repair Plastic water closet seat, Seat and cover for pedestal pan, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed

S & F in repairs Jet spray, CP, brass body with wall hook and 1 mtr SS pipe complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete in ground floor and pavings not exc 15cm thickness (below or above ground level), including removal of debries to a distance exc 1.5 Km but n. exc 2 Km complete all as specified and directed.

M&L for providing, cement concrete type B0 1:2:4 (12.5mm grade aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for Rendering 10mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces , finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacture instruction complete all as specified and directed Note WPC will be measured & paid separately.

Supply only Liquid water proofing compound.

M&L for bitumen blown ,any grade, applied hot, two coats, to concrete surfacs at the rate of 1.5 Kg/sqm per coat complete all as specified and directed

M&L for polythene film, black, 50 micron laid in floors complete all as specified and directed

M&L for Cement Concrete type D2 1:4:8(using 40 mm graded aggregate) as in foundation, filling and mass concrete etc complete all as specified and directed

M&L for Cement Concrete type B1 1:2:4(using 20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed

S&F in replacement 60 cm long, 40mm dia Tubes, 'light grade', galvanised, with all fitting; laid in trenches complete all as specified and directed

Taking down cement or cement lime plaster, any description, including raking out joints, hacking for key, scrubbing down with water, etc

M&L for rendering 15 mm thick on stone masonary/brick / concrete surface of walls in cement mortar 1:6 finished even & smooth without extra cement complete all as specified and directed

M &L for preparing new surfaces plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion complete all as specified and directed.

M&L for rendering 15 mm thick on stone masonary/brick / concrete surface of walls in cement mortar 1:4 finished even & smooth without extra cement complete all as specified and directed

M &L for preparing new surfaces plastered or unplastered surfaces of walls and applying two coats of Cement paint complete all as specified and directed.

M & L rendering 10 mm thick in patches on fair faces of brick or concrete surfaces in CM 1:3 as on ceiling, facia roof projection etc finished even and smooth without using extra cement as directed by Engineer-in-Charge.

M &L for preparing new surfaces plastered or unplastered surfaces of walls/Ceilings and applying three coats of white wash complete all as specified and directed.

S&F in repairs brass,chromium plated toilet paper holder complete all as specified and as directed.

S&F in repairs two way bib cock brass chromium plated, fancy type complete all as specified and as directed.

S&F in repairs two way angle valve brass chromium plated, fancy type complete all as specified and as directed.

S&F in repair anodized aluminium three track Power coated of any color ( thickness of powder coating not less than 50 micron) sliding window with three sliding shutter , the size of outer frame three track 92 x 31.5x 1.2mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 4 mm thick glass ( plain/floated) including all-around suitable rubber gasket and MS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including all necessary fittings complete all as specified and directed by Engineer-in-Charge

S& f in repairs Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F in repairs aluminium door shutters,powder coating of any colour (Thickness or powder coating not less than 50 micron). aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F in repairs aluminium window and ventilator shutters or aluminium partition, powder coating of any colour (Thickness or powder coating not less than 50 micron),fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F in repairs 12 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber frame work complete all as specified and directed by Engineer-in-Charge

S&F in repair MS louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti for adjusting the louvers fixed in Aluminium ventilators with screws etc complete all as specified and directed by Engineer-in-Charge

S&F 100 mm size mild steel body Mortise lock, vertical type, with 4 brass liver, fixed to aluminium door complete.

S&F in repair 100 mm size mild steel body Mortise lock, vertical type, with 4 brass liver, fixed to aluminium door complete.

S & F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aparture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frame with shutter of any description (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and directed Engineer-in-Charge

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS core , 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded Prelims PVC Sheet on the front face & 2mm prelims PVC sheet on back face,supplying & fixing in frame at site as per specification & drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters of any description (Without taking off shutters from the frames) and removal from site complete all as specified and directed Engineer-in-Charge

Taking down shutter of any description exc 1.00 sqm and n exc 2.00 sqm each and removal from site complete all as specified and directed by Engineer-in-Charge

Taking down shutter of any description exc 1.00 sqm and n exc 2.00 sqm each and Refixing of shutters in same opening after resecuring or easing & adjusting, complete all as specified and directed by Engineer-in-Charge

S&F 2nd class hard wood ,Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.

S&F 35mm thick 2nd class HW rail and style, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated.complete all as specified and directed Engineer-in-Charge .

S&F 35 mm thick second class hardwood , Glazed and skeleton shutters, open rebated and repared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete.

S&F 100 mm size butt hinges, medium weight ,cold rolled mild steel, and fixed complete all as specified & directed.

S&F 75 mm size butt hinges, medium weight ,cold rolled mild steel, and fixed complete all as specified & directed.

S&F 150 mm long Aluminium anodised, barrel tower bolts of ex truded section and fixed complete all as specified & directed.

S&F 150 mm in size aluminium handles, cast type, anodized complete all as specified & directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed.

S&F in repair door closer hydraulically regulated designation No 2, aluminium (Die cast) body, universal type ,suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg fixed complete all as specified & directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S&F in repair 150 mm long Aluminium anodised, barrel tower bolts of extruded complete all as specified & directed.

S&F in repair 150 mm in size aluminium handles ,cast type, anodized complete all as specified & directed.

S&F in repair 100 mm in size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified & directed.

S&F in repair 18 / 19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified & directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified & directed.

S&F Sheet glass 4mm thick, ordinary quality and glazing with oil putty/wooden beads/aluminium glazing clip in square n exc 0.5 sq. m in each pane complete all as specified & directed.

S&F in repairs Sheet glass 4mm thick, ordinary quality and glazing with oil putty/wooden beads/aluminium glazing clip in square exc 0.5 sq. m in each pane complete all as specified & directed.

S&F in repairs figured glass 4 mm thick pin headed type and glazing with oil putty / wooden beads / aluminium glazing clip in squares n.exc 0.5 sqm in each pane all as specified complete all as specified & directed.

S&F in repair Curtain rod, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified & directed.

M&L for preparing new surfaces of wood or wood based materials of any description not other wise described over 10 CM width or girth new or previously un treated wooden surfaces and applying one coat of pink primer and two coat of synthetic enamel paint complete all as specified & directed.

M&L for Cutting holes Exnc. half brick but not exc. one brick in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete. NOTE:-(Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall).

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe.290.Gde-E-165.

M&L for preparation of new or previously untreated steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 km but n.exc 2 Km, all as specified and as directed.

M&L for preparation of newly plastered surface of wall and applying two coats of Distemper oil emulsion over one coat of primer, after application of cement base wall clear putty all as specified & directed.

M&L for preparation of new plastered surfaces of walls including pilasters / cornices etc and applying Two coat of exterior acrylic emulsion paint in camouflage pattern (as approved by Engg-in-charge) of any tints as approved, alongwith one coat of primer complete all as specified and directed.

M&L precast cement concrete Type B0 1:2:4 (12.5mm graded aggregate) louvres and jallies,50mm thick (measured solid),set in cement mortar 1:4, including all mouldings etc in repair complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old painted wooden surfaces of any description over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint.

M&L for preparation of old painted concrete or plastered surfaces of any description over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint.

Removal of existing roof treatment consisting of screed bed, tar felts etc, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km.

M&L for Cement Concrete in roof pading, filling and mass concrete type B0, 1:2;4 (using 12.5mm graded stone aggregate) complete all as specified and directed

M&L Rendering 15 mm thick C:M 1:4 mixing with WPC @ 200 ml/bag of cement on fair faces of concrete/brick tile surfaces on roof slab after wire brushing and cleaning top surface all as specified NOTE: WPC will be measured and paid for separately under respective item.complete all as specified and directed by Engg.-in- charge

M&L for water proofing treatment to RCC roof slab all as specified below and as directed:- (a) Apply one coat of bituminous primer @ 0.25 Kg/Sqm. (b) Apply a coat of blown type bitumen grade 85/25 heated to working temperature of 180 degree centigrade and applied at 1.20 Kg/Sqm of the surface area. (c) Laying APP polymer modified membrane 3mm thick with non woven polyster reniforcement weighing not less than 3.00 Kg/Sqm applied by torch application method. (d) Apply a coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm.

S&F in repair of mineral Fiber Acoustical suspended ceiling sheets with beveled regular edge tiles laid over existing grid system the tiles should have humidity resistance (RH) of 99% , NRC 0.5, Light reflectance > 87% , Thermal conductivity k=0.052-0.057 w/m K, colour white, fire performance UK class 0/Class 1 (BS 476 pt -6 &7) inmodule size of 600x600x12mm, suitable for green building applicatin, with recycled content of 30% complete all as specified Make : Armstrong or equivalent (Tile shall be model name classic Lite & Grid system shall be model Name suprafine XL 15 exposed) or equivalent

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets.

S&F 600x600mmx4mm thick false ceiling of Non esbestos fibre cement building boards (E Board) and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 605mm X 605mm . The aluminium frame work will be supported on side wall with the use of aluminium 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long, including two coats of synthetic enamel paint over a coat of pink primer complete all as specified directed by the Engineer-in-Charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F in repair 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified directed by the Engineer-in-Charge.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to FE-410-W( Gde-E-250 )quality -A complete all as specified and directed Engineer-in-Charge

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), FE-410-W( Gde-E-250 ) quality -A complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles. all as specified and as directed.

M&L for providing precast cement concrete (1:5:8) (using 20mm graded stone aggregate) solid building blocks exe 10 cm thick, in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall or pillars all as specified and directed.

M&L for outdoor coloured vitrified paving tiles, of size 300 mm x 300 mm x 8 to 10 mm thick as in floors etc laid over and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for 75 mm thick cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in plinth protection, flooring, etc including finished even and smooth without using extra cement and all as directed by Engr-in-charge.

M&L for 75 mm thick cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate, as in sub base to floors and paving etc all complete all as directed.

S&F in repair Vitreous Cliina wash basin, angle back, size 400 x 400 mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets, 32 mm dia brass waste coupling and, waste fitting and union complete all as specified and directed by Engineer-in-Charge

M&L for 75 mm dia of PVC (SWR) floor trap plain with grating including jointing with solvent cement in repair complete all as specified and directed by Engineer-in-Charge

S&F 30mm thick. flush shutter, solid core construction with block board core and ply woood face panels commercial type on both side complete all as specified and directed Engineer-in-Charge

S&F in repair Continuous (piano) hinges 20 mm wide flaps, mild steel, bright finish or electrogalvanized

S & F in repairs mild steel cloth hooks set (5-6 hooks) complete all as specified and directed by Engineer-in-Charge

S&F in repair Soap dispenser completes all as specified and as directed by Engineer-in-Charge

S &F in repair Brass Drawer pulls, 3 screw plate with fixed dished pull; 80 mm to 100mm long completes all as specified and as directed by Engineer-in-Charge

S &F in repair 50mm dia, polished, hard wood knobs fixed with screws completes all as specified and as directed by Engineer-in-Charge

S&F in repair 2nd class hardwood Beads, straight (any size) for glazed or gauzed joinery or similar work, renewed, including mitres etc.. and removing old beads to Store

Demolition of RCC of any descrition such as Kitchen chimniy, chajja, shelves, OHT Tanks,Pilar,wall, column.beam etc and in any position not otherwise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition)

M&L for Reinforcement cement concrete type B1 1:2:4 using 20mm aggregate as in slab supported on walls beams and columns in floor, roof, landing and in shelves, chajja, lintel and similar wks complete all as specified and directed by Engineer-in-Charge

S&F mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally and binding with and including mild steel wise (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge

M&L for Form work to sofites of suspended slab such as roof slab, floor slab , landing, chajjas, lintel and similar work for rough finish surface.complete all as specified and directed by Engineer-in-Charge

M&L for Preparation of old distempered / decorated surfaces of walls including washing, rubbing down and stopping holes, trading oil and greasy spots and applying Two coat of Distemper oil emulsion complete as specified and directed.

M&L for preperation of old decorated surfaces of Walls/ceiling by brooming down or steel wire brushes scrapping down smoke soor moulds efflorescent salts etc and applying one coat of white wash all as specified

Jagdamba Engineering

KEVAL ENTERPRISE