Proposed Construction of additional two Nos. of storage sheds inside wharf area at NMPA Mangaluru

GRAND TOTAL 36,26,10,323

Earth work excavation for Foundation by mechanical means for all works & depth

upto 3 m, as per drawing and technical specifications, including setting out, shoring,

KPWD Vol. 1 strutting, barricading, caution lights, including dressing of excavated surfaces,

1.14 disposing off or levelling the excavated earth or sorting & stacking the selected earth

for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of

machinery & other appurtenaces required to complete the Work

3 In all kinds of soils Depth upto 3 m Cum 6,742.00 120.36 8,11,467.12

KPWD Vol. 1 Providing and Filling in foundation with granite / trap broken metal 100mm. And

1.23 down size & with approved sand including hand packing, ramming, watering, including

4 cost of all materials and labour with all lead and lift complete as perspecifications. Cum 5,680.00 3,164.76 1,79,75,836.80

Providing and laying in position Cement Concrete for levelling course for all works in

foundation. The granite/trap/basalt crushed graded coarse aggregates and fine

5 aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150

mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all

materials of quality, labour, Usage charges of machinery, curing, and all the other

6 Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates Cum 201.00 7,336.06 14,74,548.06

Providing and laying in position Cement Concrete for all Foundation works. The

granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per

relevant IS Codes machine mixed with super plasticizers laid in finished layers, well

7 compacted using needle vibrators, including all lead & lifts, cost of all materials, quality

confirming to the requirements of relevant IS codes, labour, Usage charges of

machinery, curing and all the other appurtenances required to complete the work as

per technical specifications.

8 M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 946.00 7,668.82 72,54,703.72

Providing and laying in Cement Concrete for all Basement & surface level works,

return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded

coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with

9 super plasticisers, laid in layers, well compacted using needle vibrators, providing weep

holes wherever necessary, including all lead & lifts, cost of all materials of quality,

labour, Usage charges of machinery, curing and all other appurtenances required to

complete the work as per technical specifications.

10 M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 88.00 7,793.90 6,85,863.20

Supply and placing the Design Mix of M-30 Grade for Self Compacting Concrete

corresponding to IS 456-2000 (Re-affirmed 2021) and relevant IS codes using Batching

plant, Transit mixer and concrete pump with 12.5 mm size graded machine crushed

hard metal (coarse aggregate) from approved quarry including cost and conveyance of

all materials like cement, cement substitutes like fly ash, GGBS, etc., fine aggregate

11 (sand), coarse aggregate, Admixture, water etc., to site including and sales and other

taxes on all materials including all operational, incidental and labour charges, but

excluding cost of steel and its fabrication & formwork charges for finished item of work

with minimum cement content as per IS code including pumping & curing etc

complete for finished item of work (RCC slabs, Beams, Columns, Lintels, Water Tanks,

RCC Walls in Buildings).

Steel Fabrication

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of

13 all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking,

laping/welding joints, tying with binding wire / soft annealed steel wire and other

ancilary operations complete as per drawing and technical specification.

14 All other type of structures MT 218.00 93,232.98 2,03,24,789.64

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite

Treatment, creating continuous chemical barrier under and around the column pits,

walls, trenches, basement, excavation, top surface of the plinth filling, junction of wall

KPWD Vol. 2 and floor, along the external perimeter of building, expansion joints, over the top

4.1 surface of consolidated earth on which apron is to be laid, surrounding of pipes and

conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of

chemical, diluting in water to one percent concentration, labour, usage charges of

machinery, complete as per specifications.

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster

with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement

KPWD Vol.2 plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge

8.9 to brick masonry including rounding off corners wherever required smooth rendering,

providing and removing scaffolding, including cost of materials, labour, curing

complete as per specifications and as per directions of Engineer-in-charge.

ASID CONSULTANTS 3/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

Finishing walls with Premium Acrylic Smooth exterior paint with

Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up

resistant, Alkali & Water resistant of required shade: New work (Two

coats applied @ 1.43 L/10 m² over and including priming coat of exterior

17 primer applied @ 2.20 kg/10 m²) with paint of approved quality to give Sqm 5,438.00 210.04 11,42,197.52

an even shade, after thoroughly brooming the surface to remove all dirt,

dust, mortar drops and foreign matter including preparing the surface

even and sand paper smooth, cost of materials, labour complete as per

specifications and as per directions of Engineer-in-charge

Providing and applying white cement based putty of average thickness 1 mm, of

KPWD Vol.2 approved brand and manufacturer, over the plastered wall surface to prepare the

8.51 surface even and smooth complete as per specifications and as per directions of

Engineer in charge.

19 Centering and shuttering including strutting, propping etc. and removal of form for

20 Foundations, footings, bases of columns, etc. for mass concrete Sqm 1,028.00 381.56 3,92,245.68

CPWD Walls (any thickness) including attached pilasters, butteresses, plinth and string

5.9.2 courses etc.

22 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 572.00 935.34 5,35,017.28

Structural steel works Conforming to IS:2062 [E 350 (Fe 490) A] with minimum yield

stress 350 Mpa Including supplying and fabrication in portal frames/ rafter/ beams/

purlins made from plates/standard members, foundation bolts etc., connected to one

another with brackets, gussets, cleats, bolted and/or welded etc., as per design

direction, complete including transportation from owner's/client's steel yard/godown,

loading/ unloading at clients/owners shop/fabrication yard, fabrication including

preparing shop layout/ template, flame cutting, straightening, bending necessary,

marking, making holes with drilling machines, fitting, making Jigs & fixtures, welding,

hoisting, including surface preparation as per approved process cleaning of surface

etc., all complete including cost of steel and all other accessories/consumables as per

approved drawing/ specification/ direction of Engineer-in-charge

(Non-Schedule Item)

Providing and applying two coats of epoxy zinc phosphate primer followed by two

coats of high-build epoxy paint to structural steel members, including proper surface

preparation by mechanical cleaning/degreasing, touch-up of damaged primer after

25 B-NS-2 fabrication and erection, and one final finish coat at site after erection to achieve the Kg 4,52,808.00 8.67 39,26,344.80

specified dry film thickness (DFT), complete with all materials, labour, scaffolding, tools

and tackles, as per approved specifications and the directions of the Engineer-in-

Charge (Non-Schedule Item)

Providing and fixing 0.50 mm thick colour coated Galvalume roofing sheets with

effective cover width as per manufacturer's specifications, hot-dip coated with

Aluminium-Zinc-Silicon alloy coating (55% Aluminium, 43.5% Zinc and 1.5% Silicon),

fixed to steel purlins with galvanized iron J/L hooks, 8 mm dia GI bolts, nuts, C.I. plain

26 B-NS-3 washers, bitumen/rubber washers and UV-resistant plastic caps, including cutting, Sqm 10,400.00 1,102.50 1,14,65,994.38

drilling, lapping, alignment, transportation, lifting, handling, all fixtures and

accessories, complete in all respects as per approved drawings and the directions of

the Engineer-in-Charge. (Excluding the cost of purlins, rafters and trusses.)

(Non-Schedule Item)

Providing & Fixing Roofing Ridge Cap made out of 0.47 mm TCT colour coated

Galvalume sheet (55% Aluminium, 43.5% Zinc, 1.5-1.6% Silicon alloy coating) of 1145

mm developed width, machine bent to required profile and fixed over roof ridge with

GI J/L hooks, 8 mm dia GI bolts, MS brackets (25 x 10 mm), nuts, bitumen/rubber

27 B-NS-4 washers and UV-resistant plastic caps, including stitching of overlaps with self-drilling RM 266.00 1,114.87 2,96,554.88

screws to prevent wind uplift, cutting, bending, sealing, all accessories, labour, tools &

tackles, transportation, complete in all respects as per approved drawings and

direction of Engineer-in-Charge.

(Non-Schedule Item)

Providing and fixing 0.50 mm thick colour coated Galvalume side wall cladding sheets

(same specification as roofing sheets), fixed to steel wall girts with GI J/L hooks, self-

28 B-NS-5 drilling screws, washers and accessories, including cutting, drilling, fixing, complete in Sqm 8,250.00 1,102.50 90,95,620.54

all respects as per approved drawings, for shed side walls and gable ends.

(Non-Schedule Item)

Providing and fixing pre-formed GI/Galvalume eaves gutter (size 300 x 150 mm or as

per approved drawing) fixed to roof eaves with brackets at 1 m c/c, including end caps,

29 B-NS-6 outlets, jointing and sealing, complete as per manufacturer's specification and RM 532.00 928.35 4,93,882.55

direction of Engineer-in-Charge.

(Non-Schedule Item)

Providing and fixing 100 mm dia PVC/GI rainwater down-take pipes from eaves gutter

to ground level / storm water drain, including clamps, bends, shoes and fixing,

complete as per direction of Engineer-in-Charge.

(Non-Schedule Item)

Providing and grouting non-shrink, free-flow cementitious grout (GP2 Grouting) of

approved make under column base plates after erection and alignment of structural

31 B-NS-8 steel columns, including formwork/shuttering and curing, complete as per Cum 40.00 50,317.73 20,12,709.18

manufacturer's specification and direction of Engineer-in-Charge.

(Non-Schedule Item)

Providing plain cement concrete (PCC M15) plinth protection / apron of 75 mm

thickness and 500 mm width all around the shed at ground level, including compaction

32 B-NS-9 of sub-grade and expansion joints at 3 m c/c filled with bitumen, complete as per Sqm 1,080.00 769.06 8,30,587.01

direction of Engineer-in-Charge.

(Non-Schedule Item)

Providing rubble stone/boulder filling between or behind abutment below apron

33 including cost of all materials, labour, hand packing, finishing top surface & all Cum 1,030.00 1,508.04 15,53,281.20

necessary works as directed and complete as per specification.

ASID CONSULTANTS 4/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

Credit for useful lateritic soil/laterite excavated from foundation excavation and

approved by the Engineer-in-Charge for reuse in filling, backfilling or embankment

works within the site, including handling, loading, transportation and stacking at the

location directed by the Engineer-in-Charge.

Construction of Subgrade and Earthen Shoulders

KPWD Vol. 3 Construction of sub-grade and earthen shoulders with approved material obtained

3.6 from borrow pits with all lifts & leads, transporting to site, spreading, grading to

required slope and compacted to meet requirement of table No. 300-2

Granular Sub-Base

Plant Mix Method

KPWD Vol. 3 Construction of Granular Sub-Base of required grading as per design mixing in a

4.1 mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in

uniform layers with motor grader on prepared surface and compacting with vibratory

power roller to achieve the desired density, complete as per clause 401

37 (v) For Grading -V Material Cum 2,772.00 2,934.66 81,34,877.52

Dry Lean Cement Concrete Sub-base

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with

coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not

exceeding 25 mm, aggregate cement ratio not to exceed 14:1, aggregate gradation

38 after blending to be as per table 600-1, cement content not to be less than 140 kg/ m3 Cum 1,386.00 5,805.60 80,46,561.60

, optimum moisture content to be determined during trial length construction,

concrete strength not to be less than 7 Mpa at 7 days, mixed in a batching plant,

transported to site, laid with a paver with electronic sensor, compacting with 8-10 t

vibratory roller, finishing and curing.

Pavement Quality Concrete using paver - M40 Grade Construction of M40 Grade un-

reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base

in recommended proportions, coarse and fine aggregate conforming to IS 383:2016,

maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and

KPWD Vol. 3 mixing plant as per approved mix design transported to site, laid with a slip form paver

6.2 finisher, spread, compacted and finished in a continuous operation including provision

of contraction, expansion, construction and longitudinal joints, joint filler, separation

membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod,

admixtures, curing compound, steel channels, finishing to lines and grades as per

ASID CONSULTANTS 5/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

Proposed Construction of additional two Nos. of storage sheds inside wharf area at NMPA Mangaluru

KPWD Rate/DSR Rate NS Items KPWD /DSR NS Items

Sl. No. Code/ NS Description of Item Unit Quantity

with CF @0.973 Rates Amount Amount

C Internal Finishing Works

Tile & Stone Works

41 DSR Code Providing and laying Polished Granite stone flooring in required design and patterns, in linear as

well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm

thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand)

11.56 laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of

matching shade including rubbing, curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge.

Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent

a on pathways/ ramps, Sqm 1243.63 4,970.75 61,81,786.29

b Providing and laying Polished Granite stone cladding on walls/ boundary walls, Sqm 4,970.75

AS per DSR Code 11.56

42 8.11 Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining Sqm 87.49 10,133.60 8,86,539.04

(veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever

required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3

(1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3

kg/sqm including pointing with white cement slurry admixed with pigment of matching shade,

including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed

by the Engineer-in-Charge.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of

required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4

(1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss

finish etc. complete at all levels.

8.2.2 Granite stone slab of colour black, Cherry/Ruby red 26.57 5,267.34 1,39,926.77

44 DSR Code TILES FLOORING IN TOILET Sqm 44.06 1,723.12 75,921.77

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with

water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,

11.41.2 laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/

sqm including grouting the joints with white cement and matching pigments etc., complete.

Size of Tile 600x600 mm

45 a TILES CLADDING ON TOILET INTERNAL WALL Sqm 148.77 1,723.12 2,56,347.41

Providing and laying in position on walls vitrified tiles:

AS per DSR Code 11.41.2

POLISH & PAINT WORKS

46 DSR Code Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per Sqm 94.61 214.86 20,326.75

manufacturers specifications :

13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of

13.48 Special primer applied @ 0.75 ltr /10 sqm

47 DSR Code Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface sqm 50.55 291.39 14,728.62

even and smooth complete.

48 DSR Code Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre sqm 44.06 2,448.05 1,07,862.73

and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns as per

26.22.1 CPWD Specification 2019, to be laid in true horizontal level suspended on interlocking metal T-Grid of hot

dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both

sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of

length 1200 mm and secondaryintermediate cross-T of size 24x32 mm of length 600 mm to formgrid module

of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per

sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-

shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6 mm thick with

precut hole on both 25 mm flange to pierce into 12x50 mm or even bigger size dash fastener if require, fixed

with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey

wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S

screws. The work shall be carried out as per specifications, drawing and as per directionsof the Engineer-in-

With 15 mm thick Tegular edged light weight calcium sliciate false ceiling

49 DSR Code Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates KG 856.76 -

etc., including welding, grinding, buffing, polishing and making curvature (wherever required)

2.35.2.1 and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the

railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc.,

of required size, on the top of the floor or the side of waist slab with suitable arrangement

as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel

members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

50 DSR Code Providing and laying at or near ground level factory made kerb stone of M-25 grade cement CUM 51.54 11,289.20 5,81,879.11

concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1

cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except

16.69 at sharp curve shall not to more than 5 mm), including making drainage opening wherever required

complete etc. as per direction of Engineerin-charge (length of finished kerb edging shall be

measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by

Engineer-in-charge).

51 C-NS 11 Providing & fixing GRC Tiles / extruded clay tiles of size 230 x 50 x 15mm for cladding work sqm 124.20 5,669.00 7,04,090

over an underlayer of 12 mm Cement plaster 1:3 (1 cement : 3 fine sand), furrowing the

underlayer with a scratching tool, and jointing with grey cement slurry @ 3.3kg per sqm.

This includes forming uniform grooves of size 8mm x 8mm, alongside the cost of

scaffolding up to 15 meters in height.

ASID CONSULTANTS 6/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

52 C-NS 12 Providing & Fixing PVC garden mesh of size 25x25mm including all materials, labours, sqm 2888.80 5,017.00 1,44,93,110

binding wires, fittings, erection etc., complete as directed by the Engineer in-charge.

53 C-NS 13 ProvidingandfixingGlassFibreReinforcedConcrete(GFRC) Architectural SCREENSinapprovedsize, SQM 155.83 6,992.00 10,89,528

pattern,designshade& internal designthicknessbetween25–30mmandborder thickness

between40–50mmor35mmoverall,asperapproved architectural drawings. GFRCSCREEN Sshall be

manufactured by simultaneously sprayed method. TheGFRCmaterial shall have spray mixde sign

withwhite cementofM/sJKCement,Birla white or equivalent,silicasand,alkali resistant glass fibre of

M/s Owens Corning, N.E.Gorequivalent, polymers of M/s Nova Polychemor equivalent ,

SuperPlasticizersofM/sKarochemor equivalentandwater,pigmentationwithexteriorgradesynthetic

inorganicpigmentsofM/sPhenochemorequivalentsoasto achieveaModulusofRupture(MOR)not

lessthan18MPaandLimitofProportionality(LOP)not lessthan7.0MPa,withglass Fiber contentnot less

than3.5-4%.Theglass fiber shall bealkali resistant (AR)withminimumZirconiumDioxide(ZrO2)

contentof16%and shall be manufactured by approved manufacturer as per specification. The GFRC

material shall not have water absorption of more than 11% by weight. The GRCS CREENS

shouldbe fixed,as per the architectural drawings with dry fixing method on to structural support

members i.e.,R.C.C,Brick worko rRed Oxide Primer-paintor Epoxy primer-paint treated mild steel

(Tobepaidseparately).Thefixing of Panels should be done using‘ Dry fixing’ method on to structural

support membersi.e.,R.C.C,Brick work MS Frame work.MS Galvanized CLAMPS & PINS also if

required fasteners to be used of Steel Grip/HP/ Wurth/ Hilti/ Fischer /Klimas or equivalent. All cast

in socket to be Epoxy Primer Coated. ELECTRODES to beused of Advani, Mangalam, Esab or

Victor brand or equivalent. All grooves should be leftB open for expansion and contraction.

NoSealantwillbeusedfor fillingthegrooves.For final finishing of GRC elements one weather shield

exterior gradewater baseddilutedpaint coatwill bedone if required. Vendors shall submit shop

drawings of the same, the drawings to be duly approved by the Engineer in charge at site

ASID CONSULTANTS 7/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

Proposed Construction of additional two Nos. of storage sheds inside wharf area at NMPA Mangaluru

KPWD item NS Items KPWD /DSR NS Items

Sl. No. Description of Item Unit Quantity Rate with CF

Code/ NS Item Rates Amount Amount

PART D Door and Windows

Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up standard tubular sections/ appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required

54 dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and

sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be

smooth, rust free, straight, mitred and jointed mechanically wherever required including

cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel

screws, all complete as per architectural drawings and the directions of Engineer-in-

charge. (Glazing, paneling and dash fasteners to be paid for separately) :

21.1.1 For fixed portion

21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) KG 3080.84 516.57 15,91,454

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions

DSR CODE etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings

21.3 and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in

21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) SQM 441.60 1,639.89 7,24,177

Providing and fixing ISI marked flush door shutters conforming to IS :

DSR CODE 2202 (Part I) decorative type, core of block board construction with

9.20 frame of 1st class hard wood and well matched teak 3 ply veneering with

vertical grains or cross bands and face veneers on both faces of shutters.

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing ISI marked oxidised M.S. tower bolt black finish,

57 9.63 (Barrel type) with necessary screws etc. complete (Copper oxidised as

Providing and fixing bright finished brass 100 mm mortice latch and

58 9.76 lock with 6 levers and a pair of lever handles of approved quality with EACH 8.00 831.57 6,653

necessary screws etc. complete.

Providing and fixing aluminium die cast body tubular type universal

hydraulic door closer (having brand logo with ISI, IS : 3564, embossed

on the body, door weight upto 35 kg and door width upto 700 mm), with

necessary accessories and screws etc. complete.

TOTAL -PART D 23,89,929 -

ASID CONSULTANTS 8/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

Proposed Construction of additional two Nos. of storage sheds inside wharf area at NMPA Mangaluru

Part E Summary of Electrical Works

S.NO. DESCRIPTION OF WORK NS ITEMS AMOUNT

1 Conduit System 17,39,182.24 0.00

3 SWITCHES, SOCKETS & ACCESSORIES & DBs 3,83,752.10 0.00

4 LIGH, FANS & AIR CONDITIONERS 55,941.44 25,10,520.00

5 NETWORKING & TELECOMUNICATION 1,54,709.80 0.00

6 UPS, VOLTAGE STABILIZERS, BATTERIES &ACCESSORIES 1,36,780.88 0.00

7 EARTHING & CABLE TRAY BATTERY CHARGER 8,02,811.40 0.00

8 SUPPLY OF CABLE 0.00 34,84,510.00

9 HDPE PIPE, MV CABLE JOINTING & END TERMINATION 5,54,376.00 0.00

10 SDB LIGHT & POWER PANEL 0.00 4,55,394.00

11 LIGHTNING CONDUCTOR 5,60,206.40 0.00

12 FIRE ALARM SYSTEM 22,29,305.56 0.00

13 CCTV SYSTEM (IP BASED) 16,77,144.00 0.00

Assumptions /consderations -

1 Main Incoming Power cable

ASID CONSULTANTS 9/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

Proposed Construction of additional two Nos. of storage sheds inside wharf area at NMPA Mangaluru

KPTCL 2023-24 / DSR KPWD Rate/DSR NS Items KPWD /DSR NS Items

Sl. No. Description of Item Unit Qty.

2025/ NS Items Rate Rates Amount Amount

Ref No. Description

Part E1 1.0 Electrical Work

DSR 1.20 Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess

60 including painting in case of surface conduit, or cutting the wall and making good the same in

case of recessed conduit as required.

1.10 Supplying Galvanized steel flexible conduit pipe .... mm dia fixing on surface over inverted

tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge

61 saddles at an interval of 300 mm using NF screws and on either end of the pipe

62 2.0 WIRES & CABLES

Point wiring using Copper wire with switch.

2.1 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping

using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC

insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush

type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the

wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for

2.1.1 Short point upto 3Mtr from tapping point to out let via switch Point 4 336.30 1345.2

2.1.2 Medium point above 3Mtr upto 6Mtr from tapping point to out let via

2.1.3 Long point above 6Mtr upto 10Mtr from tapping point to out let via

2.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand

copper wire with low conductor resistance single core in open or concealed system of wiring

63 with specified IS-

The following additional tests are compulsory either to be conducted at

works or independent lab with witness by inspecting authority.

2.5 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible

copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation

sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990

65 3.0 SWITCHES, SOCKETS & ACCESSORIES & DBs

3.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with

necessary supporting back plate with required nos. of machine screws, bolts nuts etc.,

complete on the existing

3.6 Supplying and fixing of modular switch & connected accessories on

existing modular switch plate as per IS 3854 and IS 1293.

3.6.1 6A One Way Switch Each 24 120.36 2888.64

3.6.7 16A One Way Switch Each 44 212.40 9345.6

3.6.10 6/16A Universal Socket Each 44 278.48 12253.12

3.6.11 TV/Telephone Socket Each 6 184.08 1104.48

3.6.12 RJ45/I.O Outlet Cat-6 Each 24 397.66 9543.84

67 2pole+earth 250V SOCKET

5.17 Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09

tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane

(PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using

required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's

68 as an incomer for 3 phase Double door with necessary bus bar completely wired to use

on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing

of single/three phase suitable capacity MCB's as outgoings confirming to

ASID CONSULTANTS 10/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

5.18 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using

necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short

69 circuit breaking capacity of 10K and complete wiring as required confirming to IEC

5.20 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA

sensitivity on existing wood/ panel board.

71 6.0 LIGHT, FANS & AIR CONDITIONERS

6.2 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on

230V 50Hz, AC Supply complete.

6.3 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for

operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with

double ball bearing

11.4 Supplying of recess mounting non integrated type LED down light... W luminaire comprising of

pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps. LED of

Power/COB with CCT 6500 degree K. CRI> 70%. efficacy >100 lumen per W. 120degree beam

spread, life> 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The

lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level.

LED's are driven by HF electronic driver integrated in a separate control gear assembly., with PF >

0.95, power loss should< 5% of lamp Wage, short circuit & open circuit protection to be

integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should

be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2

years Warranty against any manufacturing defect working under standard electrical condition.

EL-NS 14 Supply & Installation of 120W LED highbay light round shape suitable for operation on 230V AC

supply with minimum 13020 lumens. as per standard tested for min. 10k hours confirming

minimum 50000 burning hours of life 6500K LED's only. LED Driver shall withstand 2kV surge

EL-NS 15 Supply & Installation of 120W LED Flood light suitable for operation on 230V AC supply with

minimum 13020 lumens. as per standard tested for min. 10k hours confirming minimum 50000

burning hours of life 6500K LED's only. IP 65 protection for external use. LED Driver shall

withstand 2kV surge protection.

75 8.0 NETWORKING & TELECOMUNICATION

8.1 Supplying and drawing UTP-CAT 6E LAN cable. m 1440 44.84 64569.6

8.2 Supplying and drawing PVC flexible one pair telephone unarmoured

tinned copper cable.

8.4 Supplying & Fixing of switch mounting rack with power manager &

77 8.10 Supplying & fixing of I/O socket with back box

78 8.11 Supplying & Fixing of ... ms Cat 6 Patch Cable

79 8.12 Supplying & Fixing of Patch panel for LAN cabling

9.0 UPS, VOLTAGE STABILIZERS, BATTERIES &

9.3 Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for

operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete

and Excluding batteries

and wiring complete.

9.3.2 3 kVA ON LINE UPS Each 2 45688.42 91376.84

9.5 Supplying, installation, testing & commissioning of 12V DC, AH

batteries in poly propylene container for U.P.S. Sealed maintenance free batteries.

EARTHING & CABLE TRAY BATTERY CHARGER

12.58 GI/Copper strips for grounding connections, using necessary fixing

materials as required.

12.58.1 GI/Copper strips

12.59 2 mm thick perforated cable GI tray with on existing MS angle support using necessary GI

bolts/nuts and washer or welding as required.

12.60 Supplying & Fixing Chemical earthling for grounding. Conduits, IC cut-outs & other

equipments backfill compound which is non-corrosive, thermally conductive, potential

84 to permissible limits, superior Fault conduction capacity, non toxic, weather resistance &

capable of achieving ohmic value less than one ohm

12.60.6 Using 10ft. SS rod with backfill compound 1 kit 4 7351.40 29405.6

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

ASID CONSULTANTS 11/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

SUPPLY OF CABLE

EL-NS 16 Supply of aluminium / copper conductor, XLPE insulated, armuored, PVC sheathed cable, 1100V

grade, at depth of 750mm below ground level including excavation and refling the trench over a

cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top as

86 directed by the Engineer-Incharge, complete in all respects. The armouring of the cable shall be

properly connected with the earth conductor by clamps etc. The cable shall be laid by boring the

road as required and compaction of soil & repairing of surface in prior shape shall be done

HDPE PIPE, MV CABLE JOINTING & END TERMINATION

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like

socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,

87 2025 DSR 15.16 jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the

trench but excluding sand cushioning and protective covering etc., complete as required.

2025 DSR 15.16.1 63 mm dia (OD-63 mm & ID-51 mm nominal) Metre 200 289.00 57800

2025 DSR 15.16.4 160 mm dia (OD-160 mm & ID-135 mm nominal) Metre 400 537.00 214800

Supplying and making end termination with brass compression gland and aluminium lugs for

88 2025 DSR 11.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV

grade as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of

following size in the existing RCC/ HUME/ METAL pipe as required.

2025 DSR 10.5.2 Above 35 sq. mm and upto 95 sq. mm Metre 450 72.00 32400

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV

grade of following size on cable tray as required.

2025 DSR 10.8.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Metre 3440 53.00 182320

91 EL-NS 17 SDB LIGHT & POWER PANEL

Supply, loading, Unloading, Receiving, Installation, Testing and commissioning of following

panels AS PER IEC : 61439-1&2 suitable for 415 V, 3 phase, 4 wire, 50 Hz power distribution

system. The panel shall be Indoor, free standing, floor mounting, sheet metal clad, cubicle, dead

front, dust and vermin proof type compartmentalised design fabricated out of 2mm thick CRCA

sheet steel for Load bearing members and 1.6 mm thick for non-load bearing members, complete

with colour coded, heat shrinkable PVC insulated, aluminium bus bars and separate earth bus bar

of adequate cross section through out the length of the panel. The incoming and outgoing

feeders shall be accommodated in a fully segregated, modular multitier arrangement with

adequate size and distinct cable alley, bus bar alley,. The panel shall be complete with name

plate, earthing, numbering, danger plate etc. as required and as per specifications and drawings.

The panel shall withstand the fault level of as indicated elsewhere or shown in Single Line

Important Notes: Common for all Switchboard:

The BOQ shall be read inconjunction with general notes, specification and Single Line Diagram

(attached for Ref.). Incase of any discrepancy between specification, BOQ and SLD, the same shall

be brought to the notice of Client/Consultant before quoting the rates, otherwise stringent

condition shall be deemed to have been considered.

Fault current wherever mentioned shall be Ics value. (Ics = 100% Icu).

All MCCB shall be provided with door interlocked rotary handle with ON/OFF/Trip indicating

All feeder doors shall have pad locking arrangement.

All TP feeders shall have solid isolable neutral link.

All MCCB used in starter feeder shall be suitable for motor duty application.

All Energy meters are digital type & with RS-485 port for communication.

Panel shall be powder coated of approved shade with minimum 60 micron thickness.

Size of Voltmeter / Ammeter for incomer also, 96mm x 96mm flush mounted with shrouded

terminal shall be used in the panel.

Bus bar chamber shall be kept at top of the all panels.

All bus bar shall be insulated with coloured PVC Sleeve i.e.RYB,BK as per colour code.

Internal wiring of panel shall be with size 2.5sqmm Flexible Copper Conductor for CT circuit and

control wiring with 1.5 sqmm.

All indicating light shall be LED type .

Wherever only voltmeter & ammeter are required, the same may be provided in combined

meter suitable for both parameter.

Space heater shall be provided in each cable alley.

All switchgear used in starter feeder shall be type-2 co-ordinated. Vendor is required to submit

manufacturer's type-2 co-ordination chart for the make used.

All MCCB above 250A shall be with microprocessor based O/L, S/C and Earth fault releases.

All MCCB upto 250A shall be with thermal magnetic based O/L & S/C releases.

All CTs shall be cast Resin type and shall be privided with CT shorting links.

Current density of bus bar shall be less than 1A/Sqmm.

TTA panels AS PER IEC : 61439-1&2

Necessary Co-ordination shall be done by the Panel Manufacturer/ Vendor with the vendor of

"Gas flooding system" for fire protection, for making suitable provisions in the panels at the

Design stage, Manufacturing stage, stage of testing at works & stage of commissioning at site.

The Panel shall be provided with TVSS (SPDs). Panel vendor/ Manufacturers shall Co-ordinate

with SPD Vendor for the suitable provision for the installation for the same (SPDs).

1nos.125 Amp,four pole Moulded Case Circuit Breaker (Ics = Icu = 25 KA) with thermal magnetic

based release with built in O/L & S/C release.

ASID CONSULTANTS 12/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

Digital MF Meter( with Voltage, Current & Frequency) with selector switch and one set of 3 nos.

CTs of ratio 125/5A , Class I accuracy and 5 VA burden- 1set.

3 Nos.phase indicating LED lamps each with 2 amp back up MCB.

3 Nos. on/ off / Trip indicating LED lamps each with 2 amp back up MCB.

4P, al bus bars of minimum 150 Amps capacity with heat shrinkable coloured sleeves and i/c,

SMC bus bars supports at required intervals complete for cross section, size supports & their

spacing etc. for withstanding fault level of 25 KA for 1 sec.

2 nos.100 Amp, TPN Moulded Case Circuit Breaker (Ics = Icu = 25 KA) with thermal magnetic

based release with built in O/L & S/C release.

Digital MF Meter( with Voltage, Current & Frequency) with selector switch and one set of 3 nos.

CTs of ratio 100/5A , Class I accuracy and 10 VA burden- 1set.

3 Nos.phase indicating LED lamps each with 2 amp back up MCB.

3 Nos. on/ off / Trip indicating LED lamps each with 2 amp back up MCB.

3 nos.63 Amp, TPN Moulded Case Circuit Breaker (Ics = Icu = 25 KA) with thermal magnetic based

release with built in O/L & S/C release.

Digital MF Meter( with Voltage, Current & Frequency) with selector switch and one set of 3 nos.

CTs of ratio 100/5A , Class I accuracy and 10 VA burden- 1set.

3 Nos.phase indicating LED lamps each with 2 amp back up MCB.

3 Nos. on/ off / Trip indicating LED lamps each with 2 amp back up MCB.

3 Nos. 63 Amp, 4P MCB (Ics = Icu = 10 KA).

3 Nos. 40 Amp, DP MCB (Ics = Icu = 10 KA).

EL-NS 17.1 SDB LIGHT & POWER PANEL as described above Nos. 2 225209.00 450418

EL-NS 17.2 Supply, loading, Unloading, Receiving, Installation, Testing and commissioning 32 Amp,double

pole MCB (10 KA) with powder coated enclosure.

TOTAL 0 455394

92 2025 DSR 6.0 LIGHTNING CONDUCTOR

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube,

2025 DSR 6.1 having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. Each 16 609.00 9744.00

complete as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning

conductor complete as required.(For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning

conductor complete as required.(For vertical run)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4

2025 DSR 6.1 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.. Each 16 140.00 2240.00

Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.

12.60 Supplying & Fixing Chemical earthling for grounding. Conduits, IC cut-outs & other

equipments backfill compound which is non-corrosive, thermally conductive, potential

93 to permissible limits, superior Fault conduction capacity, non toxic, weather resistance &

capable of achieving ohmic value less than one ohm

12.60.6 Using 10ft. SS rod with backfill compound 1 kit 16 7351.40 117622.4

FIRE ALARM SYSTEM

94 Supplying, installation, testing and commissioning of micro processor based intelligent

addressable main fire alarm panel, central processing unit with the following loop modules and

capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors

per loop and loop length up to 2 km, network communication card, minimum 320 character

graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in

the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24

28.2.1 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to

connect printer to printout log and facility to have seamless integration with analog/digital voice

evacuation system (which is part of the schedule of work under SH: PA System) and shall be

complete with all accessories . The panel shall be compatible for IBMS system with open protocol

BACnet/ Modbus over IP complete as per specifications.

95 Supplying, installation, testing & commissioning of addressable beam detector with short circuit

28.2.12 isolator (inbuilt or separate) complete with emitter and receiver including connections with Each 10 92659.50 926595

remote test features etc complete as required.

96 Supplying, installation, testing & commissioning of addressable manual call point complete as

97 Supplying, installation, testing & commissioning of addressable horn cum strobe complete as

28.5 CABLING & WIRING

98 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

28.5.2 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as Metre 2496 226.56 565493.76

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

28.5.3 existing surface / recessed steel conduit of following pairs, cores and size including connections

and interconnections etc. as required.

CCTV SYSTEM (IP BASED)

5MP /6MP IP IR Bullet Camera

Supplying Installation Testing and Commissioning of 5MP/6 MP IP IR Bullet Camera having

following specifications, type of lens and features etc :-

1) Type of Camera: Bullet Camera

2) Image Sensor: 1/2.8" or better progressive Scan CMOS get color image even at night condition

3) Signal System: PAL/NTSC

4) Minimum Illumination: 0.006Lux@ F1.4, AGC ON, 0 lux with IR or better

ASID CONSULTANTS 13/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

5) Imaging: 1/3s to 1/30000s, Auto Gain Control , White Balance- Auto, Back Light Compensation,

Multi zone Privacy Masking, HLC, Digital Watermarking.

6) On Screen Display: Camera should display Camera title, Date & Time in live & recorded video

7) Signal to Noise Ratio: > 50 dB

8) Lens Type & Focus: as given below.

9) Day & Night: True Day & Night High Performance Mechanical IR cut filter with auto switch, IR

Source- Inbuilt IR LED's with effective distance upto 50 Mtrs integrated IR and 30 Mtrs for colour

10) Video Compression (Minimum): H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC,

11) Wide Dynamic Range: WDR (120dB or more)

12) Digital Noise Reduction: DNR (2D/3D) On/Off

13) Streaming: Triple streaming, configurable

14) Video Streaming & Frame Rates: Triple streaming , configurable Main stream: 5MP/6MP

@25/30 fps, Sub streams: D1@25/30 fps or better

15) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through

client software or web browser

16) Profile Management: User configuration import, export

17) Security: User Authentication, Digital Water Marking

18) Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 512

GB. It should be supplied with minimum 128GB memory Card.

19) Recording Management: Format SD, overwrite, storage management, video to NAS device,

20) Edge Analytics: Tripwire, Intrusion, Motion Detection

21) Alarm Trigger : Motion/tampering detection; network disconnection detection; IP conflict

detection; memory card state detection; memory space detection

22) Alarm Support: It should have 1/1 Alarm In/ Out Port

23) Audio Support: It should have 1x Built-In Mic and 1/1 Audio In/ Out Port for external Mic. and

Speaker (As per site requirement) with G.711U/A / G.711Mu/ AAC/ G.726 audio compreesion

24) Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE,

NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast,

25) System Capability: ONVIF

26) VMS: Camera shall support open source VMS

27) Cyber Security: trusted boot, AES 256-bit Encryption, Configuration encryption, trusted

execution, Digest, security logs, account lockout, , video encryption, IP/MAC filtering, HTTPS,

28) Ethernet: 1 RJ 45 10/100 Ethernet port

29) Power Input: The camera should support simultaneous dual power input—12 VDC (via power

adapter) and PoE—to ensure continuous operation in the event of a failure in one power source.

30) Power Requirement: 12VDC/24V DC/PoE (802.3af)/ePoE

31) Enclosure: IP67 weather proof, IK10

32) Operating Condition: Ambient Temperature:- (-)05°C to 50°C, humidity 95% (max) (non-

33) IR life: 40000 hours or higher

34) Video Bit rate: 32 KBPS - 8 MBPS or better

35) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS

5MP/6MP IP IR 2.7 to 4 mm ~12 to 13.5mm or better Varifocal Motorized lens outdoor Bullet

PTZ (Pan. Tilt and Zoom) IP IR Camera

Supplying Installation Testing and Commissioning of PTZ (Pan,Tilt and Zoom) IP IR Camera having

following spcifications and features etc :-

PTZ (Pan,Tilt and Zoom) IP IR Camera having following spcifications and features etc :-

1) IP IR PTZ Camera: Motorized PAN TILT ZOOM with IR

2) Image Sensor: 1/2.8" or better progressive Scan CMOS

3)Signal System: PAL/NTSC

4) Minimum Illumination: 0.008 Lux@ F1.6, AGC ON,, 0 lux with IR, or better

5) Imaging: 1/1s to 1/30000s, Auto Gain Control , White Balance- Auto, Back Light Compensation,

Image Rotation, Multi zone Privacy Masking (Upto 24 Area), HLC, Defog, Region Of Interest and

6) On Screen Display: Camera should display Camera title, Date & Time in live & recorded video

7) Signal to Noise Ratio: > 50 dB

8) Event Notification: Through Relays, E-Mails or FTP

9) Day & Night: True Day & Night High Performance Mechanical IR cut filter with auto switch, IR

Source- Inbuilt IR LED's with effective distance. The camera should have IR LED’s and cover

distance up to 300 meter or above

10) Auto Tracking: The camera should be equipped with Deep-learning-based auto tracking

function using simultaneously all of the panning, tilting and zooming should be available. When a

motion is detected in a registered monitoring area, the camera should track the motion (object)

and capture it.

11) Pre/Post Event Buffering: The camera should support atleast of 5 seconds of pre & post event

12) Presets: 300 Presets

13) Video Compression (Minimum): H.265 or better, H.264, Audio:- G.711U/A, G.711Mu, G.726,

14) Wide Dynamic Range: WDR (120dB or more), HLC & BLC

15) Digital Noise Reduction: DNR (2D+3D) On/Off

16) Image Setting: Rotate Mode, ROI ,EIS, Defog, saturation, brightness, contrast, sharpness

adjustable through client software or web browser

17) Profile Management: User configuration import, export

18) Cyber Security: Configuration encryption, AES 256-bit Encryption, Digest, account lockout,

video encryption, IP/MAC filtering, trusted boot, trusted upgrade, trusted execution

19) Onboard Storage: Camera should support built in Micro SD/SDHC/SDXC Card slot upto 512

GB . It should be supplied with minimum 128GB Memory.

20) Recording Management: Format SD, overwrite, storage management, video to NAS device,

remote archive access via FTP login

21) Edge based Video Analytics & Alarm Trigger: Motion/tampering detection; network

disconnection detection; IP conflict detection; memory card state detection; memory space

detection, Tripwire, Intrusion, Object Abandon/ Missing, SMD, Face Detection

ASID CONSULTANTS 14/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

22) Network Protocol: SFTP, IPv6, IPv4, DNS,NTP, HTTP, HTTPS, SNMP, TCP/IP, PPPoE, NFS, ICMP,

DHCP, SMTP, RTSPS.

23) System Capability: ONVIF Profile S, G & T. CCTV Camera OEM should be fulltime member of

ONVIF and quoted models should be listed on ONVIF official website (All the certifications &

Credentials should be valid on the date of technical evaluation).

24) VMS: Camera shall support open source VMS

25) Connectivity: 1x LAN RJ-45 (10/100Base-T)

26) Audio Support: Audio Interface : The camera should have 1/1 Audio In/Out to connect

External Mic and Speaker Audio Compression : PCM, G.711U/A, G.711MU, G.726, MPEG2-Layer2,

27) Alarm In/Out : Alarm In/out- 7/2 Ch In/Out

28) Power Input: The camera should support simultaneous dual power input—DC/ AC (via power

adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one

29) Power Requirement: 24 VDC, 2.5 A (± 25%), PoE+ (802.3at)

30) Enclosure & Weather Proof Standard: IP67 weather proof and IK10, TVS 8000V lightning

proof, surge protection, voltage transient protection

31) Operating Condition:- Ambient Temperature:- (-)05°C to 50°C, humidity 95% (max) (non-

32) IR life: 40000 hours or higher

33) Video Bit rate: 32 KBPS - 8 MBPS or better

34) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS

5MP IP IR motorized PTZ @25/30fps or better camera, Triple streaming , configurable on

Main stream: 5MP@25/30 fps Sub streams:1080p@25/30 fps, varifocal lens 3.95mm

100 DSR 2025 40.9.3 (±5mm) ~ 177.75mm (±5mm) or better with Automatic & manual Focus Adjustment provisions, Nos. 8 107974.00 863792.00

45x Optical zoom and 16x Digital zoom with angle of view H: 65.7°–1.9°V: 39.4°–1.1°D: 73.1°–2.1,

PAN Travel: Pan: 0° ~ 360° endless,Manual Pan: 260° /s, Preset :

300° /s, Tilt Travel: Tilt: -20° ~ 90°, auto flip 180°, Manual Tilt: 120° /s, Preset : 200° /s

Network Video Recorder (NVR)

101 Supplying Installation Testing and Commissioning of following Channel Network Video Recorder

DSR 2025 40.11 (NVR) with camera licenses to record for all channels having specifications and features etc as

mentioned below :

1) Network Video Recorder Embedded/ Installed OS (Linux) along with Camera Licenses to record

per NVR and to provide a live view, storage and simultaneously Multi-channel playback of all IP

camera or more and must be ONVIF with minimum support of 384 Mbps

incoming Bandwidth.

2) NVR should support video compressions : H.265 or better, H.264, MJPEG.

3) Must support 1 channel RCA Input, 2 channel RCA Output for Two-way Talk with G.711U/A,

G.711u, PCM, G726 audio compressions.

4) Intelligent auto power on when power resumes after power outage.

5) Storage: It should support minimum 8 SATA Slots with 20TB capacity/ Slot and RAID support of

6) Connectivity Interface : 2 Nos. x 10/100/1000 Mbps Ethernet Ports, 1x RS485, 1x RS232, 1x

7) Backup Interface : Its should have 4 Nosx USB port (2x USB3.0, 2xUSB2.0)

8) Video Output Ports: 2x HDMI and 2 VGA

9) Alarm Ports: It should have 16/8 Ch In/ Out ports to connect various type of external sensors

and output devices like hooter/ Siren etc.

10) Email & SMS Altert options: Option for SMS/ Email Alerts to minimum 5 designated mobile

number for power failure, HDD failure, vandalism, tempring, network disconnection and panic

11) Web & Mobile Application: Web, Mobile app ( For iPhone, iPad, Android Phone) for alerts

12) Protocols: HTTP, HTTPS, TCP/IP, IPv4/IPv6, UDP, DHCP, DNS, SMTP, UPnP, IP Filter, PPPoE,

FTP, DDNS, Alarm Server, IP Search, Multicast, Auto Registration, ONVIF (Profile T, Profile S,

CGI, SDK and OEM Cloud for remote monitoring without any public IP need.

13) Standards: CE, FCC, RoHS, BIS Certified

14) Power Supply : Should support AC100-240V, 50/60Hz Power supply.

15) Operating Condition : -5°C to 50°C, humidity 90% (max) (non-condensing)

16) The VMS application shall support all the features & functionalities of the offered cameras.

17) VMS should consist Licenses for all channels to record Cameras with General, motion

detection, intelligent, alarm and POS recording modes. VMS should be provided with Camera

Licenses , with no dependency of VMS licenses by binding with the MAC address of the cameras

to achieve the functionality.

18) The NVR OEM shall be responsible for providing a mobile application compatible with both

Android and iOS devices, enabling remote monitoring and playback of cameras/NVR footage.

19) The OEM must provide its own DDNS server hosted in India, eliminating the need for a public

IP address for remote monitoring over the Internet.

20) Must support Continuous, Alarm, Motion, Instant, Panic Recording Mode

21) It should support Resolution: 32MP; 24MP; 16MP; 12MP; 8MP; 5MP; 4MP; 1080p; 720p; D1;

22) When alarm recording is enabled and an event occurs, you can click the alarm icon on

monitoring page to view the alert details. The snapshot function is supported on monitoring and

23) The Network Video Recorder (NVR) shall be configured to send email whenever a system

message is created or an alarm event occurs. The email server shall be a valid SMTP server. Each

recipient email address shall be configured to receive any combination of critical, warning, or

informational messages or alarm notifications. When an alarm occurs, the email message

includes the NVR name,

time of alarm and a list of camera that is configured to record upon alarm

24) It should have Web and GUI interface.

25) Built-In Artificial Intelligence: NVR should have built-in AI :-

- 2 Channel face detection and recognition, - Minimum

4 Channel perimeter protection, - Minimum 8 Channel

Smart Motion Detection

26) Face Recognition Database Capacity: It should support total Blacklist and Whitelist capacity of

Minimum 20,000 Faces or more with Face Detection speed of 12 face images/sec and facility to

add Name, gender, birthday, address, credential type, credential

No., countries & regions and state to each face image.

ASID CONSULTANTS 15/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

27) Face & Human Attributes Search: Search Pictures/ Video by Gender, age group, glasses,

expressions, face mask, beard, Top color, top type, hat, bag, age, gender and umbrella.

28) ANPR Capability: It should support ANPR Camera with License plate, plate color, vehicle body,

vehicle model, vehicle logo, calling, seatbelt, vehicle registration location etc vehicle attributes.

29) Alarm Notifications based on: Motion detection, video tampering, video loss, scene changing,

PIR alarm, Camera external alarm, Face detection, face recognition, perimeter protection

(intrusion and tripwire), ANPR, people counting, stereo analysis, crowd distribution, heat map,

Disk Full, Storage Error, IP Conflict and abnormal behavior of fan, cybersecurity exception

30) Alarm Notification should be linked with Recording, snapshots, Camera external alarm

output, buzzer, logs, presets and email.

31) General AI Based Search: Search Pictures by channel, time, event type, target classification

(Fall Detection, People Approach Detection, People No. Exception Detection, People Staying

Detection, Violence Detection.

32) Smart playback function: Should support smart search for the selected area in the video and

smart playback to improve the playback efficiency

33) VCA (Video Content Analytic): Should support multiple video contented analytics based on

camera analytics

34) Analytics by NVR: Perimeter protection and face recognation

32 Channel Network Video Recorder (NVR) having display split :- Main screen:

Hard Disk Drive

102 Supplying, Installation, Testing and Commissioning following capacity Serveillance grade Hard

Disk with upto 256MB/s Transfer Rate, 256 MB Cache, 7200 RPM Disk Speed, 3.5 inch form

factor, SATA Interface, BSMI, ICES-003/NNB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-

Scheme, TUV, UL Certifications.

Supplying, Installation, Testing and Commissioning of following size LED display (LED monitor)

industrial grade with 3840x2160 resolution or better, USB playback, bluetooth and miracast

connectivity, 4X HDMI 2.0, DP 1.2, HDR 10/10+, brightness: 500-nits or better, Video wall mode

DSR 2025 42.4 should be available, contrast ratio: 1200:1, OPS slot, viewing angle (H/V): 170°/ 170°, response

time less than 12ms, Display control shall be on monitor screen and programmable with remote

(remote shall be supplied with system),

Key Board, Optical Mouse, etc. as required.

Supplying and fixing 24U Rack with 4 inch Castor wheels and front brake Floor Standing Rack with

Main Frame Pillar of 1.25mm Powder Coated CRCA Sheet with removable side panels, L- Shape

adjustable Vertical Mounting Rail of 2mm with 'U'Marking completely knocked-down condition

(CKD) Shape, fitted with 4 number cooling fans, minimum 5nos two line cable entry/exit

DSR 2025 -39.24 provision at top and bottom with rubber protection, Front door 5mm Toughened Glass with MS Nos. 2 21201.00 42402.00

frame or MS perforated with lock, Rear MS vented or perforated door, Powder coated Color- RAL-

7035 or black, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers

closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as

Fiber Backbone-2Runs x 6core Fiber Cable,OM3 MM

105 Supplying and drawing following core Multi mode Fiber Optic Cable having corrugated steel

armoring, leser optimize 50/125 μm with HDPE jacket, LSZH (Low smoke Zero Halogen), Tight-

buffered or loose tube, maximum attenuation: < 3.5 dB/km at 850 nm, < 1.5 dB/km at 1300 nm,

bandwidth > 2000 MHz-km at 850 nm, > 500 MHz-km at 1300 nm compliance and certifications:

ISO/IEC 11801 Ed. 2.2, ANSI/TIA-568- C.3, ITU-T G.651.1 RoHS compliant. Multi Mode Fiber shall

be Central-loose tube filled with Thixotropic jelly, duly following Standards: ISO 11801, IEC 60793-

DSR 2025 -39.20 1/60794-1-2, ITU-T-REC G.652D and Telecordia GR- 20-core, High quality Electro Chromium

Coated Corrugated Steel tape (ECCS ) and HDPE- Sheath, Operating ambient Temperature should

be – 5 0C to +50 0C and Storage Temperature should be – 5 0C to +50 0C, Maximum Attenuation

± 3.5 dB/km at Operational Wavelength 850 nm and ± 1.5 dB / km at Operational Wavelength

1300 nm . type of fiber should be 50/125 / G.652D & Refractive Index should be 1.483/1.478, The

value for Mode-filed,Cladding Diameter 50 ± 2.5 μm and 125 ± 1μm correspondingly i/c splicing &

marking etc complete as required.

DSR 2025 -39.20.1 6 Core Multi Mode Optical Fiber Cable RM 300 87 26100.00

ASID CONSULTANTS 16/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

Proposed Construction of additional two Nos. of storage sheds inside wharf area at NMPA Mangaluru

Part F PLUMBING WORK SUMMARY

SL.NO. DESCRIPTION PWD AMOUNT NS ITEMS AMOUNT

1 SUB HEAD I : SANITARY INSTALLATIONS 170517.32 45610.00

2 SUB HEAD II : WATER SUPPLY 788559.78 0.00

3 SUB HEAD III : DRAINAGE 1359367.08 2575000.00

Grand Total 4939054.18

Grand Total 4939054.18

ASID CONSULTANTS 17/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

Proposed Construction of additional two Nos. of storage sheds inside wharf area at NMPA Mangaluru

KPWD NS Items KPWD /DSR NS Items

SR. NO. DESCRIPTION OF ITEMS UNIT Qty Rate with CF

2023/2024 Rates Amount Amount

Part F1 PLUMBING WORK

SH I : SANITARY INSTALLATIONS

106 14.1 Providing and fixing water closet squatting pan

(Indian type W.C. pan )

with 100 mm sand cast Iron P or S trap, 10 litre

low level white

P.V.C. flushing cistern, including flush pipe,

with manually controlled

device (handle lever) conforming to IS : 7231,

with all fittings and fixtures

complete, including cutting and making good

the walls and floors wherever

14.1.1 White Vitreous china Orissa pattern W.C. pan

of size 580x440 mm with Each 2 5763.1 11526.2

integral type foot rests

107 14.2 Providing and fixing white vitreous china

pedestal type water closet

(European type W.C. pan) with seat and lid, 10

litre low level white P.V.C.

flushing cistern, including flush pipe, with

manually controlled device

(handle lever), conforming to IS : 7231, with all

fittings and fixtures

complete, including cutting and making good

the walls and floors wherever

14.2.1 W.C. pan with ISI marked white solid plastic

seat and lid Each 4 5708.8 22835.4

108 14.4 Providing and fixing white vitreous china flat

back or wall corner type

lipped front urinal basin of 430x260x350 mm

and 340x410x265 mm

sizes respectively with automatic flushing

cistern with standard flush

pipe and C.P. brass spreaders with brass

unions and G.I clamps complete,

including painting of fittings and brackets,

cutting and making good the

walls and floors wherever required :

14.4.1 One urinal basin with 5 litre white P.V.C.

automatic flushing cistern Each 5 5255.7 26278.6

109 14.7 Providing and fixing wash basin with C.I.

brackets, 15 mm C.P. brass pillar taps, 32 mm

C.P. brass waste of standard pattern, including

fittings and brackets, cutting and making good

the walls wherever require:

14.7.1 White Vitreous China Wash basin size

630x450 mm with a pair of 15 mmC.P. brass Each 6 3636.8 21820.6

110 14.22 Providing and fixing G.I. inlet connection for

flush pipe connecting with W.C. pan. Each 4 135.7 542.8

14.22.A Providing and fixing CP Brass 32mm size

Bottle Trap of approved quality& make and as Each 6 955.8 5734.8

per the direction of Engineer-in-charge.

111 14.28 Providing and fixing P.V.C waste pipe for sink

or wash basin including P.V.C waste fitting

14.28.1 Semi rigid pipe

ASID CONSULTANTS 18/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

KPWD NS Items KPWD /DSR NS Items

SR. NO. DESCRIPTION OF ITEMS UNIT Qty Rate with CF

2023/2024 Rates Amount Amount

112 14.32 Providing and fixing mirror of superior glass (of

approved quality) and of required shape & size

with plastic moulded frame of approved make &

shade with 6mm thick hard board backing.

14. 32.2 Rectangular shape 453 X 357 mm Each 6.00 1201.2 7207.4

113 14.34 Providing and fixing toilet paper holder. CP

114 14.74 Providing and fixing Single lever Bib cock Long

Nose (Lifting type

cold water cartridge) with wall flange made of

Stainless steel with all concealed fitting

arrangements & all necessary accesories

complete - Class

a) 15 mm nominal bore. Each 10.00 1475.0 14750.0

115 17.61 Cutting chases in brick mansonry walls for

following diameter sand cast (spun) iron pipes

and making good the same with cement

concrete 1:3:6 (1 cement : 3 coarse sand : 6

graded stone aggregate 12.5mm nominal size),

incliding necessary plaster and pointing in

cement mortal 1:4 (1 cement :4 coarse sand):

116 14.92 Providing and fixing Soap dish wired with

200mm width made of Stainless

steel with all concealed fitting arrangements &

all necessary accesories

complete - Class

117 F1-NS 18 Providing, fixing, jointing and testing in position

of ISI marked UV stabilized UPVC pipes for

soil, waste and vent, Type-B as per IS : 13592

suitable for rubber ring joints, including all

neccessary specials and fittings (confirming to

IS:14735) i.e. bends, tees, junctions (with or

without doors), reducers, WC connectors,

couplers, cowels, clamps, rubber rings, clean

outs etc. fixing at wall/ ceiling/ floor level

supported by clamp & hangers etc. in

concealed / inside duct / under floor &

basement ceiling / external work etc. including

chase cutting as required, excavation and back

filling in all kind of soils, suspended from floor

under false ceiling or embedding the pipes laid

under floors / building in 75 mm. alround 1:2:4

cement concrete (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size)

including cost of shuttering for proper

completion of the work, breaking and making

good the walls and floors etc. after pipes have

been duly laid and tested. The rubber ring shall

confirm to IS:5382.

The Pipes will be supported with threaded G I

rods & clamps on 50x50x5 mm slotted angle.

The cost will include all support arrangements.

The work includes commissioning of all pipes

lines as per drawings and specifications and as

directed by engg-in-charge at site.

F1-NS 18.1 110mm outer dia Metre 5.00 1400.0 7000.0

ASID CONSULTANTS 19/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

KPWD NS Items KPWD /DSR NS Items

SR. NO. DESCRIPTION OF ITEMS UNIT Qty Rate with CF

2023/2024 Rates Amount Amount

118 F1-NS 19 Providing, fixing, jointing and testing in position

ISI marked (IS:4985) UPVC pipes of min 6 Kg/

Sqcm rating with fitting for waste pipe from

fixtures to floor trap including reduces,

enlarger, socket, couplers, bends, tees etc

including fixing at wall/ ceiling level supported

by clamp & hangers etc. cutting holes in wall/

floors/ slabs and making good the same with

cement concrete 1:2:4 complete as required.

F1-NS 19.1 40mm outer dia Metre 25.00 400.0 10000.0

F1-NS 19.2 50mm outer dia Metre 10.00 490.0 4900.0

119 F1-NS 20 Providing & fixing UPVC Floor trap of self

cleansing design with CP Jali complete in all

F1-NS 20.1 a) 100 mm inlet and 100 mm outlet.

( with 127dia Glossy CP Grating Each 10 891.0 8910.0

120 F1-NS 21 Providing & fixing 110m x 50mm waste with

PVC reducer including cutting chases in floor,

cutting RCC slab complete as required.

121 F1-NS 22 Providing & fixing Health Faucet with 8mm dia,

1M long PVC tube and wall hook. Approved 2600.0 10400.0

122 F1-NS 23 Providing & fixing wall mounted 35 mm

dia.,600mm long grab bar including cutting &

making good the walls.approved equal make.

Sub-Total of Sanitary Installation, Separate

for Scheduled & Non-Scheduled Items 170517.3 45610.0

SH II : WATER SUPPLY

123 13.31 Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes,

having thermal stability for hot & cold water

supply, including all CPVC

plain & brass threaded fittings, including fixing

the pipe with clamps at

1.00 m spacing. This includes jointing of pipes

& fittings with one step

CPVC solvent cement and testing of joints

complete as per direction of

Engineer in Charge.

Internal work - Exposed on wall

Internal Work - Exposed on Wall

13.31.1 15 mm nominal dia pipes. Metre 2.00 214.8 429.5

13.31.2 20 mm nominal dia pipes. Metre 2.00 285.6 571.1

13.31.3 25 mm nominal dia pipes. Metre 15.00 375.2 5628.6

13.31.4 32 mm nominal dia pipes. Metre 10.00 472.0 4720.0

13.31.5 40 mm nominal dia pipes. Metre 10.00 632.5 6324.8

124 13.32 Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes,

having thermal stability for hot & cold water

supply, including all CPVC

plain & brass threaded fittings, i/c fixing the

pipe with clamps at 1.00

m spacing. This includes jointing of pipes &

fittings with one step CPVC

solvent cement and the cost of cutting chases

and making good the

same including testing of joints complete as per

direction of Engineer in

Charge. Concealed work, including cutting

chases and making good the

13.32.1 15 mm nominal dia pipes. Metre 2.00 364.6 729.2

ASID CONSULTANTS 20/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

KPWD NS Items KPWD /DSR NS Items

SR. NO. DESCRIPTION OF ITEMS UNIT Qty Rate with CF

2023/2024 Rates Amount Amount

13.32.2 20 mm nominal dia pipes. Metre 30.00 447.2 13416.6

13.32.3 25 mm nominal dia pipes. Metre 20.00 562.9 11257.2

13.32.4 32 mm nominal dia pipes. Metre 15.00 657.3 9858.9

Providing and laying Ductile Iron pipes of class

conforming to IS 8329:2000 with latest

amendments, conveying to work site, rolling

and lowering into trenches, laying true to line,

level and perfect linking at joints, testing and

commissioning, including loading and

unloading at both destinations, cutting of pipes

wherever necessary, jointing with DI specials

(excluding cost of specials) and rubber

gaskets, cleaning the socket and spigot end

with soap solution, applying soft soap to the

socket and spigot ends before insertion of

rubber gaskets, jacking and fixing in perfect

conditions etc. The cost to include soap

solution, soft soap, waste etc. and giving

necessary hydraulic test to the required

pressure as per ISS with all lead and lifts and

cost of all jointing materials. (The contractor will

make his own arrangements for water for

testing. Earth work excavation in trenches to be

measured and paid for seperately)

Note: In sewerage projects for internal cement

mortal lining ( CML ) of DI pipes, if High

Alumina Cement ( HAC ) as recommended in

Annexure B clause 16.3 of IS8329:2000 is

considered in place of Slag or Sulphate

Resistance Cement ( SRC ), the cost of pipes

may be increased by 5-6% from the prices

listed. For DI K7 pipes:

Ductile Iron Pipe Class K-7 100mm dia. Metre 500.00 1398.3 699150.0

126 13.33 Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes having thermal stability

for hot & cold water supply including all (CPVC)

plain & brass threaded fittings. This includes

jointing of pipes & fittings with one step CPVC

solvent cement,trenching,refilling and testing of

joints complete as per direction of engineer in

127 13.34 Providing and placing on terrace (at all floor

levels) polyethylene

water storage tank, IS : 12701 marked, with

cover and suitable locking

arrangement and making necessary holes for

inlet, outlet and overflow

pipes but without fittings and the base support

for tank. Per Litre 3000.00 10.6 31860.0

128 13.4 Providing and fixing gunmetal gate valve with

CI wheel of approved quality(screwed end).

13.4.2 32 mm dia nominal bore Each 2.00 705.6 1411.3

13.4.3 40 mm dia nominal bore Each 2.00 828.4 1656.7

129 13.5 Providing and fixing ball valve (brass) of

approved quality, High or low

pressure, with plastic floats complete :

13.5.2 20 mm dia nominal bore Each 1.00 370.5 370.5

13.5.3 25 mm dia nominal bore Each 3.00 391.8 1175.3

Sub-Total of Water Supply Installation,

Separate for Scheduled & Non-Scheduled 788559.8 0.0

SH III : DRAINAGE

ASID CONSULTANTS 21/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

KPWD NS Items KPWD /DSR NS Items

SR. NO. DESCRIPTION OF ITEMS UNIT Qty Rate with CF

2023/2024 Rates Amount Amount

130 13.49 Providing and fixing on wall face unplasticised

Rigid PVC rain water

pipes of 150mm dia conforming to IS : 13592

Type A, including jointing

with seal ring conforming to IS : 5382, leaving

10 mm gap for thermal

expansion, (i) Single socketed pipes.

a)150 mm diameter Metre 50.00 670.2 33512.0

131 13. 50 Providing and fixing Unplasticised Polyvinyl

Chloride (uPVC) pipes, for

cold water supply including all uPVC plain &

brass threaded fittings

This includes jointing of pipes & fittings with

one step uPVC solvent

cement, trenching, refilling & testing of joints

complete as per direction

of Engineer in Charge. External work

13. 50.6 50 mm nominal dia Pipes Metre 60.00 455.5 27328.8

13. 50.10 150 mm nominal dia Pipes Metre 360.00 1879.7 676706.4

132 13. 60 Providing and fixing PVC (S.W.R) P Trap

10cms x 10cms with all fitting

arrangements & all necessary accessories

133 13. 64 Providing and fixing Sewer (SWR) pipes,

including all fittings, This

includes jointing of pipes & fittings with one

step solvent cement,

trenching, refilling & testing of joints complete

as per direction of.

13. 64.2 Engineernominal

110mm in Charge.dia pipes Metre 60.00 454.3 27258.0

134 13.52 Constructing brick masonry manhole in cement

mortar 1:4 ( 1 cement

: 4 coarse sand ) with R.C.C. top slab with

1:1.5:3 mix (1 cement : 1.5

coarse sand (zone-III) : 3 graded stone

aggregate 20 mm nominal size),

foundation concrete 1:4:8 mix (1 cement : 4

coarse sand : 8 graded stone

aggregate 40 mm nominal size), inside

plastering 12 mm thick with

cement mortar 1:3 (1 cement : 3 coarse sand)

finished with floating coat

of neat cement and making channels in cement

concrete 1:2:4 (1 cement

: 2 coarse sand : 4 graded stone aggregate 20

mm nominal size) finished

with a floating coat of neat cement complete as

per standard design :

Inside size 90x80 cm and 45 cm deep including

C.I. cover with frame (light

duty) 455x610 mm internal dimensions, total

weight of cover and frame

to be not less than 38 kg (weight of cover 23 kg

and weight of frame 15 kg)

With common burnt clay (non modular) bricks

of class designation 3.5 6.00 12467.9 74807.3

13.52.1 Extra for depth for manholes : Size 90x80 cm

With common burnt clay

(non modular) bricks of class designation 1.00 10898.5 10898.5

ASID CONSULTANTS 22/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

KPWD NS Items KPWD /DSR NS Items

SR. NO. DESCRIPTION OF ITEMS UNIT Qty Rate with CF

2023/2024 Rates Amount Amount

135 13. 40 Providing and fixing square-mouth S.W. gully

trap class SP-1 complete

with C.I. grating brick masonry chamber with

water tight C.I. cover 180

x 150 mm size P type & With Non Modular

common burnt clay bricks

of designation 3.5 & frame of 300 x300 mm

size (inside) the weight of

cover to be not less than 4.50 kg and frame to

be not less than 2.70 kg as

per standard design: Each 1.00 3169.5 3169.5

13. 55 Constructing brick masonry chamber for

underground C.I. inspection

chamber and bends with bricks in cement

mortar 1:4 (1 cement : 4

coarse sand) C.I. cover with frame (light duty)

600X850 mm internal

dimensions, total weight of cover with frame to

be not less than 38

kg (weight of cover 23 kg and weight of frame

15 kg), R.C.C. top slab

with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3

graded stone aggregate 20

mm nominal size), foundation concrete 1:5:10

(1 cement : 5 fine sand

: 10 graded stone aggregate 40 mm nominal

size), inside plastering 12

mm thick with cement mortar 1:3 (1 cement : 3

coarse sand), finished

smooth with a floating coat of neat cement on

walls and bed concrete etc.

complete as per standard design: Inside

dimensions 600x 850 mm and

45 cm deep for pipe line with three or more

inlets : With common burnt

clay (non modular) bricks of class designation

136 F1-NS 24 Providing fixing, jointing and testing in

position the following UPVC pipes (working

pressure 6kg/sqcm) conforming to IS: 4985 for

drainage cut to required lengths including all

necessary fittings and specials such as

bends, junctions, offsets, making proper

connections. Including providing PCC thrust

block at 2 mtr. centre to centre. Pipe to be

laid below ground level in trenches upto

required depth including excavation in all kind

of soil, dewatering, refilling, watering, ramming

& removing the surplus excavated material and

making good the same complete as

required.For external sewer.

F1-NS 24.1 160mm outer dia Metre 50.00 2000.0 100000.0

F1-NS 24.2 250mm outer dia Metre 900.00 2750.0 2475000.0

Sub-Total of Drainage Installation, Separate

for Scheduled & Non-Scheduled Items 1359367.1 2575000.0

ASID CONSULTANTS 23/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

Proposed Construction of additional two Nos. of storage sheds inside wharf area at NMPA Mangaluru

S.No. DESCRIPTION OF SUBHEAD PWD DSR / E&M - Amount NS Items Amount

1 SUB HEAD-A (PIPING & VALVES) 88,27,555.00 0.00

2 SUB HEAD-B (FIRE HYDRANT ACCESSORIES) 19,70,068.00 90,600.00

3 SUB HEAD-C (FIRE EXTINGUISHERS & MISC. ITEMS) 0.00 3,40,908.00

Grand Total 11229131.00

Grand Total 11229131.00

ASID CONSULTANTS 24/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

Proposed Construction of additional two Nos. of storage sheds inside wharf area at NMPA Mangaluru

Sl. No. DSR E&M-2025 / NS Items DESCRIPTION UNIT QTY. KPWD Rate/DSR Rate NS Items KPWD /DSR NS Items Amount

Part G1 Fire Fighting Works

A SUB HEAD-A (PIPING & VALVES)

137 27.6 Providing, laying, testing and commissioning of 'C' class

heavy duty MS pipe conforming to IS 1239/3529 i/c fittings

like elbows, tee, flanges tapers, nuts bolts, gaskets etc. in

ground including welding, excavation and providing cement

concrete blocks as supports, anticorrosive treatment with

coaltar/asphalt tape as per IS 10221, refilling the trench etc.

of following sizes. complete as required.

138 27.7 Providing, laying, testing & commissioning of 'C' class heavy

duty MS pipe conforming to IS 3589/IS 1239 including

Welding, fittings like elbows, tees, flanges ,tapers, nuts

bolts, gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or more

coats of synthetic enamel paint of required shade complete

27.7.9 200 mm dia ( wall thickness 6.3mm) RM 5 6620.00 33,100.00

27.7.10 250 mm dia ( wall thickness 6.3mm) RM 5 8023.00 40,115.00

139 27.14 Providing, installation, testing and commissioning of non-

return valve of following sizes confirming to IS:5312

complete with rubber gasket, GI bolts, nuts,washers etc.as

140 27.11 Supplying, fixing, testing and commissioning of butterfly

valve of PN 1.6 rating with bronze/gunmetal seat duly ISI

marked complete with nuts, bolts, washers, gaskets

conforming to IS 13095 of following sizes as required :

141 30.8 (HVAC) Providing and fixing in position industrial type pressure

gauges with gun metal / brass valves complete etc. as

required. Nos 8 24.00 192.00

142 27.22 Providing & fixing of pressure switch in M.S. pipe line

including connection etc. as required. Each 4 1670.00 6,680.00

TOTAL SUB HEAD-A (PIPING & VALVES) C/F TO

B. SUB HEAD-B (FIRE HYDRANT ACCESSORIES)

143 27.9 Supplying and fixing single headed internal hydrant valve

with instantaneous Gunmetal/Stainless Steel coupling of 63

mm dia with cast iron wheel ISI marked conforming to IS

5290 (Type -A) with blank Gunmetal/Stainless Steel cap and

chain as required :

27.9.1 Single headed Gunmetal set 12 8208.00 98,496.00

144 27. 10 Supplying and fixing single headed external yard hydrant

valve with 1 nos 63mm dia instantaneous FM

Gunmetal/Stainless Steel coupling of 63 mm dia with cast

iron wheel ISI marked conforming to IS 5290 ( Type-A) with

blank Gunmetal/Stainless steel Cap and chain as required:

27. 10.1 Single headed Gunmetal Set 24 8208.00 1,96,992.00

145 27.17 Supplying and fixing first-aid Hose Reel with MS

construction spray painted in post office red, conforming to

IS 884 complete with the following as required. 20 mm

nominal internal dia water hose thermoplastic (Textile

reinforced) type -2 as per IS: 12585 20 mm nominal internal

dia gun metal globe valve &

nozzle. Drum and brackets for fixing the equipmets on wall.

Connections from riser with 25 mm dia stop gun metal valve

& M.S. Pipe and socket.

146 27.16 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe

with 63 mm dia male and female couplings duly bound with

GI wire, rivets etc. conforming to IS 636 (type-A) as required

ASID CONSULTANTS 25/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

Sl. No. DSR E&M-2025 / NS Items DESCRIPTION UNIT QTY. KPWD Rate/DSR Rate NS Items KPWD /DSR NS Items Amount

147 27.18 Supplying & fixing 63 mm dia gun metal short branch pipe

with 20 mm nominal internal diameter size nozzle

conforming to IS 903 suitable for instantaneous connection

to interconnect hose pipe coupling as required :

148 G1-NS 25 Providing and fixing door with frame for all internal fire

hydrants fabricated from 20x20x3 mm and 40x20x3 mm

aluminium hollow box sections mounted with 3 no. of 100

mm Aluminium butt hinge on Aluminium angle frame of

45x45x5 mm size with hold fasts fixed to wall with P.C.C.

(1:2:4) blocks 100x100x100 mm including 2 nos allen key

lock for locking along with padlock arrangement & fully

glazed with 4 mm thick float glass approved by local Fire

Authority, powder coated fire red finish with " fire hose' Nos 12 7550.00 90,600.00

written on front suitable to house 15 mm long two length of

canvas hose with couplings, one no of branch pipe, one fire

mans axe and two numbers of portable extinguishers, first

aid fire hose and supports for hoses, branch pipes, Axe and

hose reel. Size 2100x 900 mm complete as per approved

design including necessary fixing arrangement for hoses &

axe and branch pipe.)

149 27.19 Supplying and fixing of fire brigade connection of cast iron

body with gun metal male instantaneous inlet couplings

complete with cap and chain as reqd. for suitable dia MS

pipe connection conforming to IS 904 as required:

150 27. 20 Supplying and fixing air vessel made of 250 mm dia, 8 mm

thick MS sheet, 1200 mm in height with air relase valve on

top and flange connection to riser, drain arrangement with

25 mm dia gun metal wheel valve with required accessories,

pressure gauge and painting with synthetic enamel paint of

approved shade as required:

151 27.21 Providing, fixing, testing & commissioning of 15mm dia

quartzoid bulb type sprinklers of rating 68 degree

centigrade with required accessories:

27.21.2 Upright Sprinkler Each 900 599.00 5,39,100.00

27.21.3 Horizontal side wall Sprinkler Each 200 699.00 1,39,800.00

152 27.24 Providing, fixing, testing and commissioning of installation

control valve of cast iron body, brass/bronze working parts

comprising of water motor alarm, bronze seat clapper,

clapper arm and hyraulically driven mechanical gong bell

sound continuous alarm when the wet riser/sprinkler system

activates, pressure gauge, emergency release, strainer,

pressur switch, cock valve complete with drain valve and

bypass, test control box, ball valve, MS pipe of required

size, flange, orifice plate,gasket etc of following size as

TOTAL SUB HEAD-B (FIRE HYDRANT ACCESSORIES)

ASID CONSULTANTS 26/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

Sl. No. DSR E&M-2025 / NS Items DESCRIPTION UNIT QTY. KPWD Rate/DSR Rate NS Items KPWD /DSR NS Items Amount

SUB HEAD-C (FIRE EXTINGUISHERS & MISC. ITEMS)

153 G1-NS 26 Providing and fixing standard firemans axe with heavy

rubber handle. Nos 36 1,053.00 37,908.00

154 G1-NS 27 Providing and fixing weather proof cabinet of size not less than

0.6 x 0.6 x 0.45 mtr made out of M.S. sheet not less than 1.5 mm

thick having central opening and 4 mm thick glazed glass doors

(Two nos.) suitably marked on the outside 'with the letters

"FIRE HOSE" including necessary locking arrangement and

painting in red colour suitable to accomodate, external yard

hydrant valve, 2 nos 15 mtr long Hose pipe, branch pipe, nozzle

and fire man's axe. It shall be mounted on boundary wall

complete as required. Set 24 12625.00 3,03,000.00

TOTAL SUB HEAD-G1 (FIRE EXTINGUISHERS & MISC.

ITEMS) C/F TO SUMMARY

ASID CONSULTANTS 27/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

Proposed Construction of additional two Nos. of storage sheds inside wharf area at NMPA Mangaluru

Sl. No. DSR Code (2025) DESCRIPTION UNIT QTY KPWD Rate/DSR NS Items KPWD /DSR NS Items

/ NS Items Rate Rates Amount Amount

Part I Landscape Works

155 DSR Code Providing and laying 60 mm thick faciory made cement concrete Sqm 646.75 1,108.08 7,16,647.04

interlocking paver block of M -30 grade made by block making

machine with strong vibratory compaction, of approved size,

16.68 design & shape, laid in required colour and pattern over and

including 50 mm thick compacted bed of coarse sand, filling the

156 DSR Horticulture Plantation of Trees, Shrubs, Hedge, ground covers and

& Landscaping seasonal plantsat site i/c watering and removal of

2025 unsaverieable material’s as perdirection of officer in charge

2.57 (excluding cost of plant & water)

2.57.1 Trees plantEach9.452.57.2 Each 100 9.45 945.00

2.57.2 Shrubs PlantEach4.702.57.3 Each 300 4.70 1,410.00

2.57.3 Hedge Plant/ Ground Cover Plants /Seasonal Plants Each 900 3.15 2,835.00

TOTAL -PART I 7,21,837 -

ASID CONSULTANTS 28/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

Proposed Construction of additional two Nos. of storage sheds inside wharf area at NMPA Mangaluru

KPWD item Code/ NS KPWD Rate/DSR Rate NS Items KPWD /DSR NS Items

Sl. No. Description of Item Unit Quantity

Item with CF @0.973 Rates Amount Amount

Part J Structure Works for Road works

Surface dressing of the ground including removing vegetation and inequalities

157 not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up

Earth work excavation for Foundation by mechanical means for all works &

depth upto 3 m, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution lights, including dressing of

158 excavated surfaces, disposing off or levelling the excavated earth or sorting &

stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m

including cost of labour, tools, usage of machinery & other appurtenaces

required to complete the Work

In all kinds of soils Depth upto 3 m Cum 13,191.00 120.36 15,87,668.76

Preparation and consolidation of sub grade with power road roller of 8 to 12

tonne capacity after excavating earth to an average of 22.5 cm depth, dressing

159 to camber and consolidating with road roller including making good the Sqm 12,445.00 212.99 26,50,656.82

undulations etc. and re-rolling the sub grade and disposal of surplus earthwith

lead upto 50 metres.

Construction of Subgrade and Earthen Shoulders

Construction of sub-grade and earthen shoulders with approved material

160 obtained from borrow pits with all lifts & leads, transporting to site, spreading, Cum 3,734.00 581.74 21,72,217.16

grading to required slope and compacted to meet requirement of table No.

Granular Sub-Base

Plant Mix Method

Construction of Granular Sub-Base of required grading as per design mixing in

161 a mechanical mix plant at OMC, carriage of mixed Material to work site,

spreading in uniform layers with motor grader on prepared surface and

compacting with vibratory power roller to achieve the desired density,

complete as per clause 401

(v) For Grading -V Material Cum 3,734.00 2,934.66 1,09,58,020.44

Dry Lean Cement Concrete Sub-base

Construction of dry lean cement concrete Sub- base over a prepared sub-

grade with coarse and fine aggregate conforming to IS: 383, the size of coarse

aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 14:1,

162 aggregate gradation after blending to be as per table 600-1, cement content Cum 1,867.00 5,805.60 1,08,39,055.20

not to be less than 140 kg/ m3 , optimum moisture content to be determined

during trial length construction, concrete strength not to be less than 7 Mpa at

7 days, mixed in a batching plant, transported to site, laid with a paver with

electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing.

Pavement Quality Concrete using paver - M40 Grade Construction of M40

Grade un-reinforced, dowel jointed, plain cement concrete pavement over a

prepared sub base in recommended proportions, coarse and fine aggregate

conforming to IS 383:2016, maximum size of coarse aggregate not exceeding

25 mm, mixed in a batching and mixing plant as per approved mix design

163 transported to site, laid with a slip form paver finisher, spread, compacted and

finished in a continuous operation including provision of contraction,

expansion, construction and longitudinal joints, joint filler, separation

membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod,

admixtures, curing compound, steel channels, finishing to lines and grades as

164 DSR Code Providing and laying at or near ground level factory made kerb stone of M-25 CUM 55.00 11,289.20 6,20,905.86

grade cement concrete in position to the required line, level and curvature,

jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making

16.69 joints with or without grooves (thickness of joints except at sharp curve shall

not to more than 5 mm), including making drainage opening wherever

required complete etc. as per direction of Engineerin-charge (length of

finished kerb edging shall be measured to calculate volume for payment).

(Precast C.C. kerb stone shall be approved by Engineer-in-charge).

165 DSR Code Providing and laying 60 mm thick faciory made cement concrete interlocking Sqm 4734.00 1,078.16 51,04,018.15

paver block of M -30 grade made by block making machine with strong

vibratory compaction, of approved size, design & shape, laid in required colour

16.68 and pattern over and including 50 mm thick compacted bed of coarse sand,

filling the joints with line sand etc. all complete as per the direction of

SUB TOTAL 7,55,95,723 0

ASID CONSULTANTS 29/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

Proposed Construction of additional two Nos. of storage sheds inside wharf area at NMPA Mangaluru

DSR item Code/ KPWD Rate/DSR Rate NS Items KPWD /DSR NS Items

Sl. No. Description of Item UNIT QTY

NS Item with CF @0.973 Rates Amount Amount

Part K Road Painting Works:

166 DSR Code Painting road surface marking with adequate nos of coats to give Sqm 2746.20 320.45 8,80,030

uniform finish with ready mixed road marking paint conforming to

IS : 164, on bituminous surface in white/yellow shade, including

16.48 cleaning the surface of all dirt, scales, oil, grease and foreign

material etc. complete.

16.48.1 New work (Two or more coats)

TOTAL -PART K 8,80,030 -

ASID CONSULTANTS 30/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

Proposed Construction of additional two Nos. of storage sheds inside wharf area at NMPA Mangaluru

DSR item Code/ NS Items KPWD /DSR NS Items

Sl. No. Description of Item UNIT QTY Rate with CF

NS Item Rates Amount Amount

Part L Mechanical ventilation Works

167.0 L-NS 28 PROPELLER FANS

Supplying, installing, testing and commissioning of direct driven PROPELLER FANS for

fresh/ exhaust air as shown in drawings. Housing shall be constructed of 18 gauge heavy MS steel

sheet spray galvanized. Fan motor shall be suitable for 415 + 8% volts, 50hz, 3 phase power

supply,Motor RPM shall not exceed 1500 RPM. Each fan shall be complete with permanent split

capacitor or shaded pole motor, mounting plate, accessories like wire guard, bird screen and fixed

louvers for weather protection as required. Fan selection arrangement and Electrical characteristics

shall be as follows :

L-NS 1.1 FRESH AIR - 900 mm dia 720 RPM fan suitable for 440 volts, 1200 WATT, 16000 CFM Nos. 32 41590 1330880

L-NS 1.2 EXHAUST - 900 mm dia 720 RPM fan suitable for 440 volts, 1200 WATT, 16000 CFM Nos. 32 41590 1330880

168.0 L-NS 29 MAIN CONTROL PANELS- FRESH AIR & EXHAUST FANS

Design, Manufacture, Supplying, Transport to the site, Receiving, Unloading, Shifting to location,

handling, assembling, installation in correct aligned position, grouting with dash fasteners, GI nuts-

bolts, testing and commissioning of the following bolted fabricated in compartmentalized (Form-3B

construction) conform to IS: 8623/1993, Suitable for 415V, 3Phase, 4 Wire 50 Hz Ac supply, housed

in design form CRCA sheet steel of 2mm thick for frame work and door covers, 3mm thick for gland

plate, i/c cleaning & finishing complete, having extensible type bus bars of high conductivity, SMC

bus bar supports, the maunfacturer shall be certified from CPRI for short circuit withstand capacity

of min. 25 kA for 1 Sec., fabrication shall be done in transportable sections and all front and back

doors shall be hinged type and earth with frame, Entire panel shall have a common earth bar as

specified below at the rear with 2 Nos. earth stud each side, bus bars and control wiring with

suitable size of FRLS PVC insulated copper conductor cable, cable alleys, cable gland plates in two

half, i/c providing following switch gears :-

The Bus bars will be electrolytic grade E91 Aluminium duly sleeved with Helogen Free heat shrink

coloured Insulated tube confirming to IEC 60684-3-247 Standard. The powder coating (70-80micron

as per IS:13871 for indoor and 100-120 micron for outdoor), include one size higher terminal block in

cable alley and interconnecting wires between bus bars and terminals via MCB.

All Panels shall be considered Indoor type unless specified.

The degree of protection for all indoor type panels shall be of IP:52 ("5" Indicates Dust Protected

limited ingress of dust permitted. Will not interefere with operation of the equipment and "2"

indicates protection against vertically falling drops of water with enclosure tilted upto 15 deg from

It is recommonded that only one make of switchgear to be used in a board / Panel.

The treatment of Panel Shall be Fully automatic 9-tank process for metal treatment which consists of

Solvent/ Alkaline Degreasing, Water Rinsing, De- Rusting, Water Rinsing, Passivation,

Phosphating, Water Rinsing, Activation and Drying

A separate compartment for Minimum 20% spare space of Panel shall be provided for outgoings in

future and busbars shall be drilled accordingly.

All incoming/outgoing MCB shall be mounted on din channel inside closed chambers shall have

Acrylic sheet infront and front door should be a glass for see thru.

Direct magnetic/ screwed mounting panel light of minimum 100 lux at terminal point shall be

provided in each relay, instrument and cable alley compartment and in all back accessible

compartments each with door toggle switch. Refer Finder 7L Series.

1. All Starters shall be High Performance Star Delta / DOL Motor Starters as specified (Type 2 Co-

ordination chart shall be followed of selected OEM but contactor shall be used one rating higher for

IE3 efficiency motors with MPCB/MCCB at 415 V).

Incomers –1 Nos x 100 Amps 4P MCCB thermal magnetic based of fault rating capacity 16 KA (Ics=

Icu) upto 415 volts manually operated & with in-built S/C, O/C protection relay, extended rotary

handle for door interlock, indication for breaker On/Off/Trip. Phase separater & phase barriers on

METERING & INDICATION

1 Set RYB phase indication LED lamps with 2 Amps backup MCB, Test Terminal Blocks set with

CT operated multi function panel mounted meter (96x96 mm) covering voltage, ampere, frequency,

power factor, KW, RS 485 port, MCB display with class 1 accuracy for incomer.

TVSS & BUSBARS SECTION

150 Amps Aluminium Bus Bar4P with heat shrinkable coloured sleeves I/C SMC bus bar cross

sections, side support & their spacing etc with withstanding fault level of 25 kA for 1 second.

1 No. surge protection device (type 2 class C), 4 mode, connected between each phase to neutral

and neutral to earth. Nominal discharhe current (8/20 us) 25 KA per phase SPD with 63 A

MCBincluding all necessary accessories.

16 Nos. x 16 Amps. 4P MCB to 16 nos. Fan Starters

Control Panels as described above Nos. 2 228186 456372

168.0 L-NS 30 Supplying, installation, testing and commissioning of GI construction fresh/exhaust air louvers

with bird screen painted in baked enamel shade with metallic frame work complete as

per specification approved drawings and schedules. Louvers need to be suitable in order SQM 25.12 10038 252155

to avoid rain water entry in to spaces @ 15 degree deflection with bird screen complete as

per technical specification

TOTAL FOR VENTILATION SYSTEM 3370287

ASID CONSULTANTS 31/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK

Proposed Construction of additional two Nos. of storage sheds inside wharf area at NMPA Mangaluru

Sl. No. KPWD item Code/ Description of Item Unit Quantity KPWD Rate/DSR Rate NS Items KPWD /DSR NS Items

NS Item with CF @0.973 Rates Amount Amount

Part M Toilet Block Structure Works

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per

drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,

169 including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting &

stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools,

usage of machinery & other appurtenaces required to complete the Work

In all kinds of soils Depth upto 3 m Cum 293.00 120.36 35,265.48

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other

170 similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming Cum 257.00 313.88 80,667.16

and watering, lead up to 50 m and lift upto 1.5 m

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The

granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes

171 machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators,

including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all

Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates Cum 14.00 7,067.02 98,938.28

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub

structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The

granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes

172 machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing

weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the

requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other

appurtenances required to complete the work as per technical specifications.

M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 32.00 7,476.48 2,39,247.36

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water

works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt

crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super

173 plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of

all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of

machinery, curing and all other appurtenances required to complete the work as per technical

M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 47.00 8,074.74 3,79,512.78

Steel Fabrication

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials,

174 machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with

binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and

technical specification.

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating

continuous chemical barrier under and around the column pits, walls, trenches, basement, excavation,

top surface of the plinth filling, junction of wall and floor, along the external perimeter of building,

175 expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of Sqm 121.00 139.24 16,848.04

pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of

chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete

as per specifications.

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation

KPWD Vol.2 and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour,

6.1 scaffolding and usage charges of machinery & other incidental charges complete as per the direction of

engineer incharge of work.

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in

KPWD Vol.2 superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand)

6.7 including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental

charges complete as per the direction of engineer incharge of work.

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in

KPWD Vol.2 superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand)

6.15 including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental

charges complete as per the direction of engineer incharge of work.

KPWD Vol.2 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry

KPWD Vol.2 including rounding off corners wherever required smooth rendering, providing and removing scaffolding,

8.1.1 including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine

KPWD Vol.2 sand) including rounding off corners wherever required smooth rendering, providing and removing

8.2.1 scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions

of Engineer-in-charge.

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface /

KPWD Vol.2 ceilings including rounding off corners wherever required smooth rendering, providing and removing

8.10 scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions

of Engineer-in-charge.

CPWD Centering and shuttering including strutting, propping etc. and removal

5.9 of form for

Foundations, footings, bases of columns, etc. for mass concrete Sqm 37.00 381.56 14,117.79

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. Sqm 74.00 819.75 60,661.69

CPWD Suspended floors, roofs, landings, balconies and access platformSuspended floors, roofs, landings, Sqm 217.00 902.21 1,95,780.49

5.9.3 balconies and access platform

Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 95.00 935.34 88,857.77

SUB- TOTAL 22,30,215 0

ASID CONSULTANTS 32/32 NBCC INDIA

Digitally LIMITED

signed by DEEPAK