Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 LAccepted-AOC | L1 | Accepted-AOC agreement exicuted | |
| 2 | L2₹1.5 L+₹13,473.24 (9.59%)Rejected-AOC | L2 | Rejected-AOC higher rate hence not admitted | |
| 3 | L3₹1.6 L+₹14,746.24 (10.5%)Rejected-AOC | L3 | Rejected-AOC higher rate hence not admitted |
| Sl No | Description | Qty | Unit | BABY A D L1 | Nithin V.R L3 | SANKARA L2 |
|---|---|---|---|---|---|---|
| 1.00Sheet Roofing | ||||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.08 | cum | 317.4 ₹25.71 Lowest | 350.72 ₹28.41 | 355 ₹28.76 |
| 1.00 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 0.08 | cum | 7,179.27 ₹581.52 Lowest | 7,932.89 ₹642.56 | 7,800 ₹631.8 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 528 | kg | 169.28 ₹89,379.84 Lowest | 187.05 ₹98,762.4 | 185 ₹97,680 |
| 1.00 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 33 | sqm | 149.2 ₹4,923.6 Lowest | 164.86 ₹5,440.38 | 162 ₹5,346 |
| 1.00 | OD220613/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness
with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have
protective guard film of 25 microns minimum to avoid scratchesduring transportation and
should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet
shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal,
complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting tosize and shape wherever required (OD created from
Price 1 DAR 51.20)
Details of cost for 216.14sqm
(External dimension of plinth)
Area of roof
20.2x10.70m=216.14sqm
Sheets Used = 20Nos x 10.70m x 1.06m = 226.84sqm
add 3% wastage = 6.81
Total = 233.65sqm | 66 | sqm | 562.1 ₹37,098.6 Lowest | 621.1 ₹40,992.6 | 620 ₹40,920 |
| 1.01 | OD220614/2025-2026:Supplying and fixing 150 mm inner PVC square cut section with brackets at the end of sheet or tiled roof for rain water collection including all cost and materials conveyance labour charges etc. complete | 11 | metre | 576.44 ₹6,340.84 Lowest | 636.95 ₹7,006.45 | 636 ₹6,996 |
| 1.01 | 50.18.9.18.2:Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall | 7.8 | metre | 238.3 ₹1,858.74 Lowest | 263.31 ₹2,053.82 | 263.31 ₹2,053.82 |
| 1.01 | 50.18.9.21:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Elbow | 3 | no | 90.43 ₹271.29 Lowest | 99.92 ₹299.76 | 99 ₹297 |
Tender Value
₹1.6 L
EMD Value
₹3,881
Closing Date
25 Aug 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
assitant engineer,LID EW kaiparambu GP
assitant engineer,LID EW kaiparambu GP
Annual Plan-KAIPARAMBU GRAMAPANCHAYATH 2025-26 (PROJ NO. 89/26)-SHEET ROOFING INFRONT OF FHC
2025_LSGD_786042_1
ET3/89/2025-26/AE/LID EW/KGP
Open Tender
Civil Works - Roads
Item Rate
365 days
mundur
refer tender documents
7 documents required · 7 mandatory
₹555
Yes
₹3,881
Yes
16 Dec 2025
18 Aug 2025
27 Aug 2025
18 Aug 2025
25 Aug 2025
18 Aug 2025
Amount
Sheet Roofing
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
OD220613/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required (OD created from Price 1 DAR 51.20) Details of cost for 216.14sqm (External dimension of plinth) Area of roof 20.2x10.70m=216.14sqm Sheets Used = 20Nos x 10.70m x 1.06m = 226.84sqm add 3% wastage = 6.81 Total = 233.65sqm
OD220614/2025-2026:Supplying and fixing 150 mm inner PVC square cut section with brackets at the end of sheet or tiled roof for rain water collection including all cost and materials conveyance labour charges etc. complete
50.18.9.18.2:Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall
50.18.9.21:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Elbow
SANKARA (BID ID -2306547)
Nithin V.R (BID ID -2307522)
Bidder Name
Nithin V.R
BABY A D
SANKARA
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1292124.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .