Renovation of Principal Secretary Chamber of BTC Secretariat, Block B, Kokrajhar.

Amount

CIVIL WORKS (SCHEDULED ITEMS): 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 9.1.2 Sal wood

9.147A Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.147A.2 Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm).

9.7 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : 9.7.7 Float glass panes 9.7.7.2 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).

13.88 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.43 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 13.43.1 Water thinnable cement primer

13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 13.83.2 Two coats

13.50 Applying priming coat: 13.50.1 With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 13.61.1 Two or more coats on new work

12.45 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

NON-SCHEDULED ITEMS: NS-1 Providing, fitting and fixing Amulya Make WPC (Classic) board wall panels with decorative laminate finish over the ply board on one side of the wall. These ply board wall panels are erected/ installed using 19mm thick BWR grade ply board frames fixed to wall by screws etc. complete in all respect as specified and directed by the department.

NS-2 Providing, fitting flush door shutters made of 35mm block board shutter & finished with decorative laminate sheet fitted with all fitting hinge, handle, Mortise Lock etc. complete in all respect as specified and directed by the department.

NS-3 Providing, fitting flush door shutters made of 35 mm Block Board Shutter & finished with Veneer Polished fitted with all fitting hinge, handle, Mortise Lock etc. complete in all respect as specified and directed by the Department.

NS-4 Providing, fitting Acrylic Coated (Vinyl Coated Paper) Decorative wall paper on wall fitted with adhesive, complete in all respect as specified and directed by the department.

NS-5 Providing, fitting and fixing Wall/Low Height Cabinets made of Amulya Make WPC (Classic) board, sunmica fitted with fitting, complete in all respect as specified and directed by the department. (Elevation of the cabinet to be measured for payment purpose) with veneer with polishing.

NS-6 Providing, fitting Office Desk made of 19mm Ply panel on frame made of BWR grade ply board, finished with Decorative Venner Sheet and polishing fitted with fitting, complete in all respect as specified and directed by the Deptt. (Top of the table to be measured for payment purpose).

NS-7 Curtains: a) Supplying and Installation of Main Curtain made with high quality cloth with curtain rods as per design.

b) Supplying and Installation of Sheer Curtain made with high quality cloth with curtain rods as per design.

NS-8 Supply and Installation of Premium Swivel Executive Chairs with leatherite covers of approved brand with hydraulic and wheels.

SANITARY WORKS: 17.78 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc. complete.

17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.28.2 Flexible pipe 17.28.2.1 32 mm dia

17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.2 Kitchen sink without drain board 17.10.2.3 470x420 mm bowl depth 178 mm

17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

17.34 Providing and fixing toilet paper holder : 17.34.1 C.P. brass

17.35 Providing and fixing soil, waste and vent pipes : 17.35.1 100 mm dia 17.35.1.1 Sand cast iron S&S pipe as per IS: 1729

INTERNAL WATER SUPPLY: 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 18.7.3 25 mm nominal dia Pipes

18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 18.8.1 15 mm nominal dia Pipes

18.8.3 25 mm nominal dia Pipes

18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.1 25 mm nominal bore

18.17.4 50 mm nominal bore

C.P. BRASS FITTINGS 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: 18.49.1 15 mm nominal bore

18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 18.52.1 15 mm nominal bore

18.53A Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

SANITARY FITTINGS (NON-SCHEDULED ITEMS): NS-1 Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand as directed and specified. (G.I. & C.P. pipes will be measured separately. Jaquar make 2-way bib cock with wall flange, item code: ARICHR-39041

NS-2 Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. Jaquar make. Pillar cock long neck with aerator, Cat No. AQTCHR-3011

NS-3 Providing, fitting and fixing CP soap tray/ soap dish complete as directed and specified. Jaquar Make Hotelier (Cat. No.AHS-1531)

NS-4 Providing, fitting and fixing liquid soap dispenser and liquid soap container complete as directed and specified. Jaquar Make Continental (Cat. No.ACN-CHR-1135N) (with glass bottle)

NS-5 Providing, fitting and fixing CP towel rail complete as directed and specified. Jaquar make Queen's (450mm long) (Cat. No.AQN-7711A)

NS-6 Providing, fitting and fixing Chrome Plated robe hook complete as directed and specified. Jaquar Make 32mm (HT/FT) (Cat. No.ALD-705/ 709)

NS-7 Supplying fitting and fixing of Health Fauchet (Hand Shower) of 15mm dia. as directed and specified. Jaquar Make ALD-573 1.2m Meter Long Flexible Tube

NS-8 Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified. Jaquar make 32mm (HT/FT) (Cat. No.ALD-705/709)

NS-9 Providing fitting and fixing C.P. Grating to the floors complete as directed and specified. 110mm dia

ELECTRICAL WORKS (SCHEDULE ITEMS): 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 1.10.3 Group C

1.12 Wiring for light/ power plug with 2X4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. 1.14.2 2 X 2.5 sq.mm + 1 X 2.5 sq.mm earth wire.

1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. 1.14.3 2 X4 sq.mm + 1 X 4 sq.mm earth wire.

1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1.27.1 1 or 2 Module (75mmX75mm)

1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1.27.3 4 Module (125mmX125mm)

1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1.27.4 6 Module (200mmX75mm)

1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1.27.5 8 Module (125mmX125mm)

1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections ets. as required.

1.55 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed PVC conduit, and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 1.55.3 Group C

1.56 Supplying and fixing suitable size GI box with modular plate cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connection etc. as required. (For light plug to be used in non residential buildings).

2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 2.4.3:- 8 way (4+24), Double door.

2.10:- Supplying and fixing 5A to 32A rating, 240/415V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2.10.1 Single pole

ELECTRICAL WORKS (NON-SCHEDULED ITEMS): NS-1 Supplying with fitting and fixing MCB/RCCB/MCCB in existing Distribution Boxes wih making necessary connection as approved, specified and directed by the deptt. a) 40A 4P 10KA 415V 50Hz 'C' Curve MCB

NS-2 Supply, installation and testing of 9W LED surface-mounted round panel with aluminium die cast housing 30mm height LED downlighter of make Jaquar Model Ensave Plus Cat No. LESP01R009XC or equivalent with necessary support and connection with 1.5 sq.mm PVC insulated SC copper conductor. Rate to include cost of lamps. [DL]

NS-3 Supplying, installation, testing and commission surface-mounted, powder coated spot light with die cast aluminium housing and anodized aluminium reflector.

NS-4 Supplying, installation, testing and commission IP 20-rated strip light suitable for indoor applications with different colours and wattages of make Jaquar LWD Indoor Strip Light (24 V DC) Standard 5.0 mtr roll Cat No. LSTP03X005XW 4 W or equivalent with necessary Power Supply unit, support and connection with 1.5 sq.mm. PVC insulated SC copper conductor as required and as directed by the department.

NS-5 Ceiling Fan/Wall (Cabin Fan)/ Exhaust Fan: a) Supply, Installation, Testing and Commissioning of 1200mm sweep Ceiling Fans with connection of make Orient Model SUMMERKING (XI Aluminium Blades) or equivalent.

b) Supply, Installation, Testing and Commissioning of 300mm sweep Exhaust Fans with connection from existing 6A socket outlet (rate of socket and connection to the socket to be taken separately) of make Orient Model 300 mm Spring Air or equivalent.

NS-6 Air Conditioning System: a) Supply, Installation and Commissioning of 2.5 TR Split Airconditioning system of approved make with stabilizer, copper piping and all necessary accessories, for Principal Secretary Room.

b) Supply, Installation and Commissioning of 1.5 TR Split Airconditioning system of approved make with stabilizer, copper piping and all necessary accessories, for other areas.

NS-7 Supply and Installation of IP Based CCTV System with 4 cameras, NVR wiring.

M/S. N.K Enterprise

M/S H.B. ENGINEERS