Construction of 2 storied with 3 storied foundation 50 seated S.T. Girls Hostel Ashram type beside the Bir Sidhu Kanu Jr. High school attached Boys Hostel, Kalyani, Nadia - Supply and fixing of Fans and Luminaries.

Amount

Supply & delivery of 1.1 KV Gr. 3 core 6 sq. mm XLPE/PVC insulated Armored Aluminum Conductor Cable (Make - Polycab / Havells / Currency / Universal / RR Kabel).

Supplying and fixing of medium gauge 32 mm dia GI Pipe (ISI-Medium - Jindal/Bansal/Tata) protection with necessary fittings and jointing materials as required. [F-6/11(b)]

Laying 3 core 6 sq. mm cable after cutting floor/pavement/wall and making holes including embedding the cable at an average depth of 75 mm in floor/pavement/wall and mending the damages to original finish incl. removing the rubbish. [5(i)/F-3]

Laying of one no. 3 core 6 sq. mm cable in UG trench of 460 mm wide x 760 mm average depth with brick protection on the top of the cable with 8 (eight) nos. bricks per Mtr. including filling the space between the bricks and cable and also the trench with shifted soil, levelling up and restoring the surface duly rammed. [1(a)/F-2]

Laying of 3 core 6 sq. mm cable through existing GI Pipe. [3(a)/F-1]

Laying of 3 core 6 sq. mm PVC Ar. Al. Cable on wall/surface incl. S&F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) wire, making holes etc. as necy. mending good damages and painting. [2(b)/F-4]

Supplying and fixing of compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of 3 core 6 sq. mm XLPE/PVC armoured cable. [7(b)/F-4]

Finishing the end of 3 core 6 sq. mm XLPE/PVC armoured cable by crimping method incl. S&F solder ess socket (Dowels make), tapes, anticorrosive paste & jointing materials. [8(b)/F-5]

S & F 2-way MCB SS enclosure (powder coated) with IP-20/30 protection (Make - Siemens/Legrand/ABB) on the wall after cutting the wall, mending well the damages to original finish incl. painting, connection & provision for earthing attachment with S&F 2 nos. 240 V, 10 kA, C - Curve, 10/16/20 A SP MCB and necessary connection as per direction of EIC. (11/D-9 and 7/D-6)

S & F Electronic socket and step type fan regulator (Make - Anchor) on existing switchboard with bakelight top cover after making housing for regulator knob by cutting bakelight top cover including making necessary connections. [18(a)/E-6]

S & F 240 V AC/DC superior type Call Bell (Anchor-8320) on HW board incl. S&F HW board. [20/D-13]

S & F MS fan clamp of two-piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting. [29/D-14]

Supply of box type, 4-feet long single T-8 LED tube light fittings complete with all accessories [Make - Phillips, Cat No. - TMC 502 P 1x T-LED 22 W / Wipro, Cat No. WIO912208 / Crompton, Cat. No. IGP161LT8-16 1 x T8]. [NS]

Supply of box type, 4-ft long twin T-8 LED tube light fittings complete with all accessories [Make - Phillips, Cat No. - TMC 502 P 2 x T-LED 22 W / Wipro, Cat No. WIO922208 / Crompton, Cat. No. IGP162 LT8-16 2 x T8]. [NS]

Supply of 4 ft. long 18/20 Watt, polycarbonate LED T- 8 lamp (Make - Philips Master LED tube model no. 18W 865 T8 I 2100 lm / Wipro, Cat No. LL13-181-65SESL / Crompton, Cat. No. LTT8-20]. [NS]

Supply of 240 V, BC type 12 W LED lamp to the lamp point [Make - Philips / Wipro / Crompton].

Supply of 240 V, 1200 mm (48") sweep AC Ceiling fan [Make - Crompton Riviera High Speed / Usha Striker Plus / Orient Energy Star, Colour - Brown] complete with all accessories but without regulator.

Supply of 240 V, 900 mm (36") sweep AC ceiling fan (Make - Orient / Crompton / Atomberg ) complete with all accessories but without regulator.

Supply of 240 V, 12'' (300 mm) dia heavy duty A. C. Exhaust Fan (Make - E.P.C. Electrical Pvt. Ltd., Heavy Duty).

Supply of outdoor type LED luminaire [Make - Philips, Type - BRP501 LED098 CW R3C PSU S1 SPD / Wipro, Cat No. - LR02-132-XXX-57-G3 with SPD / Crompton, Cat. No. CRP-411-120-30-SL-GL-NSG / Havells, Item description-ENDURASUNBEAMSL110WLED757SASYTOPC] [NS]

Fixing only single/twin LED light fitting suspended 25 cm bellow the ceiling with 2 nos. 20 mm dia EI conduit (16 SWG) supports fixed with “L” type (65 +75) mm x 25 mm x 3 mm thick MS clamps whose one sides fixed on ceiling with suitable size 4 nos. fastener and other sides connected with the conduit with suitable size 4 nos. nut-bolt and making a connection by PVC insulated stranded copper wire (3 x 1.5 sq. mm up to 1 mt. length through the polythene pipe) with mending good damages to original finish incl. S&F the fixing materials, panting etc as required. NS

S & F additional 2 nos. 20 mm dia EI conduit (16 SWG) supports, PVC insulated stranded copper wire (3 x 1.5 sq. mm through the polythene pipe) & panting etc. as required for extra suspension of fitting exceeding 25 cm. NS

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod up to 30 cm incl. painting the rod with approved paint and making necessary connection as required by 3x1.5 sq. mm flexible copper wire. [21/(a)/C-3]

Fixing only 12'' (300 mm) dia exhaust fan after making a hole in the wall and making good damages and smooth cement finish as per GS. [28(b)/C-4 ]

S & F Aluminum louver shutter for 12'' (300 mm) dia exhaust fan on wall with necy. bolts & nuts (6 mm dia x 62 mm long). [ 32(a)/D-14 ]

S & F surface mounting LED Battens in Extruded Aluminium housing (Make - Havells, LUMILINEPLUSBS10WLED830SPCSSIND or similar type of Philips/Crompton/Wipro make) on wall with necessary screws etc.

S & F GI waterproof type looping cable box size 200 mm x 150 mm x 100 mm deep having 2 mm thick comprising of one 240 V, 16 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for up to 2- core 16 sq. mm PVC/A cable and having lined with rubber gasket GI top cover with brass machine screws etc., earthing terminal with lug concealed on wall near the bracket including painting with anticorrosive paint. (5/H-5)

Supply & Fixing of Post Top lantern LED fittings (Make - Philips, Type - BGP200 LED35 CW PSU GR CPC SPD / Crompton, Cat Ref.- LPTO-40-CDL-M / Wipro, Cat No. LP07-671-XXX-57-CL) on post of gate with necessary GI bracket.

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 3x1.5 sq. mm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. C-3/18.

BARAI ENTERPRISE

DECADON ENGINEERING