REPAIR/ MAINT OF INTERNAL WIRING INCL SUB MAIN WIRING, MCB DB, BLDG SECURITY AND CONNECTED ITEMS IN POCKET 5 AND 6 UNDER GE ROORKEE

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, incl fixtures and fittings like swithes, ceiling rose, pendant, regulator, sockets, light fitting (Mirror light,Bulk head, LED Panel 2''x2'', security light, wall fitting, down light, Flood light, post top lantern) etc. removing materials for taking credit and making good disturbed surfaces of walls, floors, etc with cement plaster, putty and paint to match with the existing surface complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG / with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass/GI screws for mounting switches, sockets, fan regulator, etc / modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator etc complete all as specified and directed for the following points:-

One light / ceiling fan / exhaust fan / call bell point controlled by one switch.

One 6A socket point controlled by one switch on independent board

One 6A socket point controlled by one switch on same board

-Ditto- all as per item No. 2.00 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires.

-Ditto- all as per item No 2.00 above here in before but wiring in existing conduit for the following :-

One light / ceiling fan / exhaust fan / call bell point controlled by one switch

One 6A socket point controlled by one switch on independent board

One 6A socket point controlled by one switch on same board

One light point controlled by two No. two way switch complete all as specified and directed

-Ditto- all as per item No. 4.00 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires.

M&L for sub main wiring along with earth wire with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 25mm concealed in wall/ floor etc including taking down existing unserviceable sub main wiring of any description complete all as specified and directed for the following sizes:- (Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length)

2runs x 4 sqmm(Ph & N) + 1run x 4 sqmm(earth wire)

2runs x 6 sqmm(Ph & N) + 1run x 6 sqmm(earth wire)

2runs x 10 sqmm(Ph & N) + 1run x 10 sqmm(earth wire)

4runs x 10 sqmm (3Ph & N) + 2run x 10 sqmm(earth wire)

Notes for item No. 1.00 to 6-00: (i) Quoted rate shall deemed to include the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint to match with the existing surface. (ii) If any beam / column / Rock wall is encountered while cutting chases, that particular portion may be provided with PVC casing & capping or surface conduit for drawing cables and surface PVC gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure. (iii) No cutting shall be done on ceiling for laying PVC conduit for ceiling fan point wiring. Surface conduit or PVC casing capping may be used in that portion.

Supply and fix in replacement of switch piano flush type 6 Amps, one way, 240V, 50Hz

Supply and fix in replacement of socket 6 Amps, 2-in-1 flush type universal 240V, 50Hz

Supply and fix in replacement of switch piano flush type 16 Amps, one way, 240V, 50Hz

Supply and fix in replacement of socket 16A & 6A, 2-in-1 flush type universal 240V, 50Hz

Supply and fix in replacement of electronic socket type fan regulator rotary type in 5 steps, 240V, 50Hz

S&F switch piano flush type white finish 5/6 Amps, single pole two way, 230 volts, 50 hz complete all as specified & directed.

Supply and fix in replacement of bell push switch flush type 6 Amps, 240V, 50Hz

Supply and fix in replacement of electric call bell ding dong type, AC, 240V, 50Hz

Supply and fix in replacement ceiling rose in poly carbonate 3 terminal brass, flush type 6 Amps, 220 volts AC, ISI marked, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete all as specified.

Supply and fix in replacement of Lamp holder, angle type with metal ring, PVC/Polycarbonate body type B-22 with back plate, including LED bulb 10/12 watts complete all as specified.

Supply and fix in replacement of LED batten type body pre-wired with bipin holders,connector block complete with all accessories including 20 Watt (4 feet) retrofit LED tube with Polycorbonate body, full white and connecting up with pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified.

Supply and fix in replacement of old unserviceable LED T5 tube light fitting 20 watts with polycarbonate housing and polycarbonate diffuser with integrated electronic driver with all accessories including connecting up with pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified.

Supply and fix in replacement of old unserviceable LED mirror light light fitting Integral slim LED batten Integral 9 / 10 watts of 2 feet long internally prewired complete with all accessories and including connecting up with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified.

Supply and fix in replacement of recessed mounted LED panel light 2'x2' size, 36 watts, full white / warm white as per site requirement with electronic driver in CRCA sheet steel body with polycarbonate diffuser suitable for POP / Amstrong / grid false ceiling complete with all fixing accessories including making electrical connection with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified.

Supply and fix in replacement of slim round recessed/surface mounting LED down light 18 W 8 inch with aluminium die-cast body, finish with drop down PC diffuser warm / full white with optimized heat sink for efficient dissipation including taking down existing unserviceable light fitting of any description complete all as specified and directed. Make: Crompton/Havells/Philips/Orient/Eveready

Supply and fix in replacement of ventilating / PVC exhaust fans fancy square type 225/250mm sweep with plastic fiber body heavy duty 230 Volt AC, single phase complete with plastic louvers and including making suitable size of holes in wall for fixing the fan & making good including making electrical connection with ceiling rose including taking down existing unserviceable ventilating fan of any description complete all as specified and directed.

Supply and fix in replacement of LED street/security light fitting 25 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including GI pipe bracket made up of 40 mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified.

Supply and fix in replacement of old unserviceable LED Flood light fitting 50 watt capacity with SMD LED pressure die-cast aluminium housing with reflector including making electrical connection with pvc insulated and pvc sheathed twisted three core wire of suitable size complete all as specified. Note :- The Quoted rate is deemed to be included for installation of light fitting at any height including necessary T & P and safety equipments.

S & F in replacement of old unserviceable LED Highbay light fitting 100 watt capacity with PDC aluminium housing with reflector including making electrical connection from ceiling rose to light fitting complete all as per specified and directed.

Supply and fix in replacement of old unserviceable LED Post Top Lantern light fitting 30/40 watt capacity with tranparent diffuser and fixing arrangement on new GI Pipe medium grade of dia 40 mm duly grouted on wall/brick pillar with the help of cement mortar including making electrical connection with pvc insulated and pvc sheathed twisted three core wire of size 1.0 sqmm complete all as specified and directed at site.

Supply and fix in replacement of old unserviceable Post Top lantern light fitting of capacity 1x7/8 watts with B-22 base LED bulb, transparent polycarbonate diffuser and fixing arrangement on new GI pipe of 25/40 mm dia medium grade of length 1.5m duly grouted on ground/wall/brick pillar with the help of cement mortar including making electrical connection with pvc insulated and pvc sheathed twisted three core wire of size 0.5 sqmm from junction box to light fitting complete all as specified and directed at site.

Supply and fix in replacement of old unserviceable twin core of flexible wire of size 23/0.0076 with PVC medium grade pipe 20mm dia for connection of post top lantern fitting from one junction box to other junction box complete all as specified and directed at site.

Supply and fix in replacement PVC / DK Thermoplastic cable junction boxes IP 65 with metric knockouts for cable entry, weather proof suitable for outdoor installation for Gate light and Post top lantern, fixed on wall with screw & rawal plug and on GI Pipe wth suitable size MS clamp and Nut-bolts,washer of size 150x100x60 mm complete including one connector block three terminals and PVC cable gland 02 Nos for incoming and outgoing cables with provn of 01 nos single pole MCBs 10-32 amps inside the box including taking out/down existing unserviceable junction box of any description complete all as specified and directed at site.

Supply and fix in replacement of modular MCB protected plug and socket board in sheet steel enclosure with 25 Amp rated mini MCB and 25 Amp rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board including taking down existing unserviceable plug & socket board of any description and making good with cement plaster, putty and paint to match with the existing surface all as specified.

Supply and fix in replacement of MCCB / MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed. Note: MCCB / MCBs shall be measured and paid separately.

Supply and fix in replacement of MCB distribution board, TPN, 4 way, 415 V, 3 phase, AC in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed. Note: MCBs shall be measured and paid separately.

All as per item No 33 here-in-before but SPN, 8 way, 230 V, 1 phase, AC. Note: MCBs shall be measured and paid separately.

All as per item No. 33 here-in-before but SPN, 6 way, 230 V, 1 phase, AC. Note: MCBs shall be measured and paid separately.

All as per item No. 33 here-in-before but SPN, 4 way, 230 V, 1 phase, AC. Note: MCBs shall be measured and paid separately.

Supply and fix MCCB 100A, 16 KA, 4 Pole, 415 V, 50 Hz with fixed thermal magnetic release fixed in Vertical TPN complete all as specified and directed.

Supply and fix in replacement of MCB 100 Amp, 10 KA, TPN, 'C' curve, 415 V, 50 Hz including taking down existing unserviceable MCB of any description complete all as specified and directed. Make : Legrand / Schineder / Seimen/ Havells/Indoasian

Supply and fix in replacement of MCB 63A, 6 KA, SPN, 'C curve, 240 V, 50 Hz including taking down existing unserviceable MCB of any description complete all as specified and directed. Make: Legrand / Schineder / Seimen/ Havells/Indoasian

Supply and fix in replacement of MCB 10A/20A/32A, 6 KA, single Pole, 'C curve, 240 V, 50 Hz including taking down existing unserviceable MCB of any description complete all as specified and directed. Make: Legrand / Schineder / Seimen/ Havells/Indoasian

Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron,UL listed,CPRI Tested at 25 KA fault current for one second and is provided with universal clamp made of SS earth enhancing compound shall be of 30kg/pit(resistivity shall be less than 0.12 Ohm meter) tested as per IEC 62561-7.The above arrangements shall be provided with heavy duty earth poly plastic pit cover of 6000 kg load bearing capacity (Size:270 x 240 x 200mm) and FRLS insulated copper conductor of size 6 sqmm, single core cable drawn through and including suitable dia of medium grade GI pipe upto 7 mtr incl cutting and chases on wall and floor complete all as specified and directed. Note: The rate quoted above shall be deemed to be included for excavation and earth work, refilling, removal of surplus earth and making good the surface around chemical earthing.

S&F in replacement of single phase Kwh meter with LCD display, class I, base mounting of rating 10-60 Amps, AC 240 Volt, 50 HZ, including mounting on wooden box of suitable size and making incoming and outgoing electric connection complete all as specified and directed. Note: Old unserviceable meter to be deposite in MES store.

S&F in replacement of Three phase Kwh meter with LCD display, class I, base mounting of rating 10-60 Amps, AC 415 Volt, 50 HZ, including mounting on wooden box of suitable size and making incoming and outgoing electric connection complete all as specified and directed. Note: Old unserviceable meter to be deposite in MES store.

M & L for Circuit/submain wiring with single core FRLS PVC insulated copper stranded conductor cable drawing into existing PVC rigid conduit surface /concealed/ casing caping as required of 1.5 Sqmm for Inverter wiring, including taking down unserviceable existing wiring etc complete all as specified and directed.

Supply and fix in replacement of 3mm thick phenolic laminated hylam sheet of size 9" X 11" including necessary cutting, drilling holes for fixing of switches, sockets & fan regulators etc and fixing the hylam sheet on existing metal flush box with new brass/GI screws and washers complete all as specified and directed. Note: S&F of switches, sockets & regulators shall be measured and paid separately.

Supply and fix in replacement of 3mm thick phenolic laminated hylam sheet of size 8" X 5" including necessary cutting and drilling holes for fixing of switches, sockets & fan regulators etc as per site requirement and fixing the hylam sheet on existing metal flush box with new brass/GI screws and washers complete all as specified and directed. Note: S&F of switches, sockets & regulators shall be measured and paid separately.

Supply and fix in replacement of 3mm thick phenolic laminated hylam sheet of size 5" X 5" including necessary cutting and drilling holes for fixing of switches,sockets & fan regulators etc as per site requirement and fixing the hylam sheet on existing metal flush box with new brass/GI screws and washers complete all as specified and directed Note: S&F of switches, sockets & regulators shall be measured and paid separately.

Taking down existing unserviceable service cable of any description and Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated multi-stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or strip and overall PVC sheathed, 16 sq. mm nominal cross section, 4 core in service connections as per IS 7098 (Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc complete all as specified and directed.

Taking down existing unserviceable service cable of any description and Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated multi-stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or strip and overall PVC sheathed, 25 sq. mm nominal cross section, 4 core in service connections as per IS 7098 (Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc complete all as specified and directed.

Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for laying of HDPE Pipe and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

Labour and T&P for horizontal boring of hole passing through pavement/road/hardstanding by manual or mechanical means suitable for 50mm bore complete all as specified and directed

Supply and fix in replacement of 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor twin core, 16 sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections including connecting on LT OH line / energy meter / DB etc complete all as specified and directed.

- Ditto - all as per item No 55 but of size twin core 10 sqmm

Labour only for attending day to day electric complaints of internal electrification and repairing in situ by skilled electrician along with a helper and rectifying the faulty points/ replacing defective items (Switch, Socket, MCB, Tubelight, holder, capacitor, regulator, bell etc) complete all as specified and directed. Note: (a) The trademan should carry all Tools and safety equipments to carry out complaint. Any accident/mis-happening occur will be the responsibility of contractor. (b) The store used in rectifying the complaint will be measured under 'supply only' items on the same BOQ. (c) Trademen shall report the concern JE at 0900 hrs. (d) The defective items replace shall be issued to the contractor and schedule of credit will be recovered.

S&F Exhaust fan Steel body AC single phase 230/240 Volt of size 300 mm sweep complete with louvers including making whole on wall to fix exhaust fan and grouting of nut bolts etc and making good the disturbed sufaces of wall all as specified and directed . Note: Old unserviceable exhaust fan to be deposited in MES store

Supply fix and fabricate 18mm thick prelaminated Particle board, interior grade, with screws & hinges to timber/wood /welded to angle iron frame for meter box, coloured and patteren as approved including hinge, locking arrangement and stainless steel bright finish handle complete all as specified and directed.

M&L for angle iron work to fix on wall after cutting, chasing and welding and making good by PCC work to fix particle board of any size complete all as specified and directed.

Supply and fix in replacement retrofit LED tube with Polycorbonate body 20 Wat 4 feet, complete all as specified.

Supply only knob for socket type fan regulator rotary type in 5 steps

M/s badrinath Traders

M/S Durvish Mourya

PARADISE INFRA POWER COMPANY

AMAR NATH SHARMA

m/s rajesh bros.

NITHYA INFRATECH

G.H. INFRASTRUCTURE PRIVATE LIMITED

MAX ELEVATOR