AUGMENTATION AND ADDITION ALTERATION OF STREET LIGHT SYSTEM AT CERTAIN LOCATION AT INS VALSURA JAMNAGAR

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation, laying of pipe line etc and getting out in any type of soil (i.e.soft/ loose or hard/ dense soil) complete all as specified and directed.

Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soil complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 mts and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as directed.

M&L for PCC 1:4:8, type D2 (using 40 mm graded granite stone aggregate) as in foundations, filling and mass concrete for steel pole complete all as specified.

M&L for RCC 1:2:4, type B1 (using 20 mm graded granite stone aggregate) as in foundation including raft, fottings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under reamed piles and mass concrete for steel pole including necessary formwork complete all as specified.

S&F 10 mm dia and over TMT bars cut to length bent to shape required cranking including bending, hooking ends etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per item No. 6 here-in-above but 6 to 8mm dia bar - do -

M&L for TMT bars/ Mild steel angle cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated and inclusive of one primer coat, one under aluminium coat and one aluminium finishing coat of paint (for supporting frame for flood light fitting) complete all as specified.

M&L fancy bracket made from MS tubing as required size at site, cut to length, bend to shape required and suitable for GI street light pole 3M length including painting with golden enammeled paint two coat on one coat of primer complete all as directed.

Supply, fix, test and commissioning 45 Watt LED out door top street littings, High Efficiency IP 66 protection, powder coated pressure die Spunt aluminium housing and clear injection moulded polycarbonate/ toughened galss have multi chip on board, Beam Angle (Throw & Spread) and metal clad PCB. The minimum lumen output of the system shall be greater than 4050 lumens with minimum lumens per watt 90±10% asymmetric fixed as per manufacturers instructions to existing bracket including nut bolts, 2.5 sqmm, 3 core cable and electrically connected to the existing system making necessary electrical connection and testing on completion complete all as directed. Make: Bajaj Cat No. BORAGE SMALL TM 45W WW LED CLEAR or equivalent of Philips/ Jaquar/ Wipro/ Havells

S&F 3 mtr height hot dip galvanized steel pole hexagonal/ octagonal cross sections grade S355JO of diamensions top dia 70mm, bottom dia 130mm, sheet thickness 3mm, base plate diamensions 200x200x12 mm, foundation bolt size 4 Nos x 16mm dia, pitch circle dia 200mm, bolt length 450mm, projected bolt length 100mm, anchor plate thickness 3 mm with inbuilt compartment for mounting switch box, earthing etc covered with hinged door confirming to IS:2629/ BS EN ISO 1461 alongwith connections with MCB SP 6 A -1 No. with R, Y, B and Neutral connector 63A Capacity-01 No. suitable for 3Mtrs steel pole including painting with golden enamelled paint two coat on one coat of primer complete all as specified and as directed. Make : Bajaj BOP-3030 or equivalent in Philips/ Havells/ Wipro. Note : Earth work and PCC foundation shall be measured separately.

S&F Astro digital time switch, 1 channel mounting in existing panel, suitable for switching ON/ OFF light and other electric devices according to the rising/setting of the sun with combination function for creating switching programs in which devices are switched according to astronomical time and/or fixed preset times and also suitable for daily astronomical calculation of the sunrise/sunset time based on the entered location or location coordinate complete all as directed. Make: Legrand cat No. 4126 54 or equivalent in L&T / Siemens / Schneider / C&S

S&F 3 pole power contactor ML 3 including necessary connections for incomming and outgoing. Make : L&T Cat No. SS90721 / Philips / Legrand / C&S

Supply, laying, testing XLPE insulated screened, PVC innersheathed galvanised steel strip or wire, armoured, heavy duty LT UG electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sq.mm, 4 core complete all as directed.

Cutting of existing road for removing/laying UG cables/Pipe line,depth of cutting not exceeding 60 cm and width 45 cm and filling the trench of road i.e excluding top 15cms with existing aggregate obtained from cutting, watered and properly rammed to satisfaction of EIC and finally provide 150mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate to entire width of trench & finally match the top surface to road & disposal of debris to a distance not exceeding 50 Mts and depositing where directed complete all as directed. (Note : Quoted rate is deemed to be inclusive of 150mm thick PCC 1:3:6 cutting any type of road /foot path and removal of debris)

Supply and lay 32 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/ cm2, laid in trenches as cable protection with all fittings complete all as specified.

S&F 50 mm bore GI tubing light grade including necessary fittings such as bend, tee, elbow etc complete laid in trenches/ fixed on walls complete all as directed.

S&F 40 mm bore GI tubing light grade including necessary fittings such as bend, tee, elbow etc complete in laid in trenches/ fixed on walls complete all as directed.

M&L for earthing complete with galvanized steel earth plate as electrode 600x600x6 mm buried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of earth plate at a depth not less than 1.5 m below ground level connected using galvanized iron earth lead strip 32x6 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI earth lead strip protected by Gl light grade pipe 40 mm bore, including provision of concrete pit of PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) with 40 mm thick cover of RCC 1:2:4 reinforced with 8 mm dia TMT bars reinforced at 100 mm C/C both ways and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 2 m long placed on top edge of earth plate, char coal and common salt filling test point made out of 40x8 mm flange with fixing arrangement, funnel, wire mesh and earth work in any type of soil, returning, filling in and removal of surplus soil to a distance not exceeding 50 m all as per electrical Plate No. 3 of SSR Part I and connected to earth test point, including taking down existing earthing complete all as specified including testing on completion.

J J ENTERPRISE

M/s.Bhavin Electricals

M/s Balaji Enterprise

ABR Trading Co

JAYESH TRADING CORPORATION