Jiladhikari bhadohi ke rajkiya avaas me souchalaya, snanagar, dressroom ke marammat, kitchen ka vistar avam any vividh karya

Dismantling brick work in cement mortor manually/by mechanical means including stacking of unserviceable material and disposal of within 50 meters lead as per direction of Engineer-in-charge.

Dismantling Old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead as per direction of Engineer-in-charge.

Dismantling cement concrete or brick or granolithic floors including base concret and including stacking of dismentaled materials as directed by Engineer-in-charge within distance of 60 meters (200 feet) as per SI.No. 697.

Excavation in foundation in ordinary soil (loam clay or sand)including filling lift upto 1.5m (5 feets) & lead upto 30m (100 feets) & including filling ,watering & ramming of excavated earth in to the trenches or into the space b/w the building & the site of foundation trenches or into the plinth & removal & disposal of surplus earth as directed by the E/I uptp a distance of 30M(100 fts.) from the foundation trenches including all T & P phowarah and basked etc. complete

Filling of carted earth in plinth including supply of necessary quantity of sand from a distance not exceeding 8km from the side of work and including watering dressing etc. required for proper completion of work.(lead up to 30m & lift 1.5m)

Cement concrete with 4cm guage approved stone ballast ,approved coarse sand and cement in proportion of 8:4:1 including supply of all material labour and T & P etc required for proper completion of the work.

Coarse Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km from the site of work and including watering ,dressing etc rate to include cost of all materials, labour T&P etc. Required for proper completion of work .

R.C.C. work with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in Foundation excluding supply of reinforcement and its fixing and binding the same with 24 B WG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20

R.C.C. work with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion of 1:1.5:3(M-20) in sunshade excluding supply of reinforcement and its fixing and binding the same with 24 B WG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20

R.C.C. work with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion of 1:1.5:3(M-20) in slab excluding supply of reinforcement and its fixing and binding the same with 24 B WG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20

Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage and over lapping and hookes required for completion of the work TMT Fe 500

1st Class brick (M-150) work in 6:1 coarse sand & cement of 1.50 fineness modulus mortar in foundation & plinth including supply of all material labour and tools and plants etc required for proper completion of work.

1st Class brick (M-150) work in 6:1 coarse sand & cement of 1.50 fineness modulus mortar in super-structure including necessary cutting and moulding of bricks required and also including honey comb brick work thickness of wall more than one brick and for extra labour to above items

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Supply & fixing of Integrated Foam PVC (Solid PVC) 100 mm x 60 mm Door Frames white/grey color & 25 mm thick Door Shutter made of Foam PVC sheet (both side decorative PVC skin) without Lead & Cadmium stablizer manufactured by ISO9001, ISO-14001 & ISO-18001, quality & environmental management accredited company having 525 kg/cum density. The work includes cost of anodized Aluminium sliding bolt, handles, shoot bolt & hinges. All edges to be white polished with Titanium Die Oxide & melamine. The Frames to be fixed to walls using dash fastners and gap to be filled with white colored silicon sealant. All the work to be completed as per direction of Engineer in Charge.

Providing and fixing factory made UPVC white colour sliding glazed door and window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).

Fixing Chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonary for holdfast embedding hold fast in cement concrete blocks of size 15x10x10 cm with cement concrete 1:3:6 ( 1 cement :3 coarse sand :6 graded stone aggregate 20mm nominal size) painting two coats of approved wood preservative to sides of chowkhats and making good the damage to walls and floors as required complete including disposal of rubbish to the dumping all complete as per direction of Engineer in charge.

15mm thick plaster wit cement mortar in proportion of 1:4 cement & Coarse sand)

12mm thick plaster with cement mortar in proportion of 1:6 cement and sand of 1.25 FM over brick work minimum thickness not be less than 10mm including supply of all material labour & T& P etc required for proper completion of the work. (1) 1 cement : 6 coarse sand

Supply and fixing 6 mm (1/4")thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. required for proper completion of the work.(Dado/skirting)

2.5cm thick 1:2:4 cement concrete floor with cement approved coarse sand & 2cm graded dala stone grit laid in planels finished with 3mm floating coat of neat cement bor cement and marble dust in ratio of 5:1 as specific over and excluding base concrete and removing any overlapping mortar at the joints of the panels if any giving them a uniform finish, including supply of all materisls labour, T&P etc. required for proper completion of work

Painting or varnishing new iron work in small areas with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint (2nd quality synthetic enamel paint of approved brand such as British paint ,Shalimar Asian or equivalent as approved by E/I ) or varnish including supply of all material labour T & P etc required for proper completion of the work Paint to be used should confirm the ISI No. 103-1950

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting (two coats) with plastic emulsion paint of first quality approved brand & manufacture on decorated wall surface to give even shade including throughly brushing the surface free drom mortar droppings and other foreign matter & sand prepared smooth

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm thick glass panes

Providing & fixing stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 300mm x 16mm

P/Fixing stainless steel tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as / IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. 250 mm x 10mm

Providing & fixing stainless steel tower handles with screws and 150mm long.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 20 mm dia

Cement concrete with 2cm guage approved stone ballast ,approved coarse sand and cement in proportion of 4:2:1 including supply of all material labour and T & P etc required for proper completion of the work.

Providing & fixing Toughened glass with putty and glazing clips in windows, clerestory windows, all complete with 5.0 mm thick glass panes

Please Enable Macros to View BoQ information