ADDN/ALTN TO CERTAIN CUP BOARD, KITCHEN CABINET AT VARIOUS SMQS / OMQS AND PROVISION OF VISITORS ROOM WITH TOILET FACILITY AT MGR AT AF STN HALWARA

Amount

Dismantling board of any description fixed in any position with nails, complete all as specified and directed.

Taking down chowkhats or frame with shutter without taking off shutter from the frame area exceeding 1.5 Sqm but not exceeding 4 sqm each, complete all as specified and directed.

S&F Factory made single extruded WPC (wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames / Chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-90 (Suspension Grade), Calcium carbonate and natural fibers (wood powder /rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full boky threaded star headed SS screws having minium frames density of 750 Kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edgn minimum compressive strength of 58 N/mm, modules of elasticity 900 N/mm and resistance to spread of flame of class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required MS hold fast / lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately), complete all as specified and directed. Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e, depth and width of profile shall be acceptable. Variation in profile dimesnsions on plus side shall be acceptable but no extra payment on this account shall be made.

M&L for factory made 18mm thick 100% solid WPC Plain board of required size comprising of virgin PVC resin of K value 57-60 ( suspension grade, calcium carbonate and natural fibres (Wood powders / rice husk / wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet single Extruded (inner) with density not less than 650kg/Cum an ISO 9001-2015 certified company, having good screw holding capacity (screw withdrawal strength of 2000N (face) & 1100N (Edge), Minimum compressive strenth of 50N/sq mm, Modulus of elasticity 850N/Sq mm and resistance of spread of flame of class A category with property of being Termite / Borer free. Water / Moisture proof, fire retardant and fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, complete all as specified and directed. Note For Item No 3 & 4 (i) Material test certificate and authentication shall be compulsory provided by the manufacturing company. (ii) Contractor shall submit e-way bill, Purchase Voucher, Test certificate/ Test report etc alongwith payment. (iii) Work shall be executed through original manufacturer / Authorised representative.

S & F in repair 40 mm flap width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and directed.

S& F in repair Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed.

S& F IPSA Z series 3D hydraulic cabinet auto cup hinges half in cabinets, complete all as specified and directed.

S& F in repair hasp and staple saftey type aluminium anodised with mild steel hinges pin including bolt to hing plate and fixed with screw size 125mm, complete all as specified and directed.

S&F in repair Aluminium handles cast type anodised 150mm long, complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and n exc 1.5 m in depth and getting out soft/loose soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed.

Removing excavated soil out side of MOD land exc 5 km and dipositing where direct at a leval n exc1.5m above the starting point etc, complete all as specified and directed.

M&L cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) 75mm thick as in sub base of floor and base of foundation footing, complete all as specified and directed.

M&L for rough finished flat surfaces of concrete Formwork to sides of concrete foundations, footings bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter, complete all as specified and directed.

M&L for rough finished flat surfaces of concrete Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc, complete all as specified and directed.

M&L for formwork for square,rectangular or polygon to sides of pillars,posts, struts, piers, columns and stanchions, complete all as specified and directed.

M&L for rough finished flat surfaces of concrete Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.

M&L cement concrete of M-25 (20 mm gradeded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass, concrete all as specified and directed.

M&L cement concrete of M-25 (20 mm gradeded stone aggregate) Beams, cantilevers,bressummers, lintels over 1.5m span, concrete all as specified and directed.

M&L cement concrete of M-25 (20 mm gradeded stone aggregate) Columns, pillars, piers,posts and struts, concrete all as specified and directed.

M&L cement concrete of M-25 (20 mm gradeded stone aggregate) Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, concrete all as specified and directed.

M&L Mild steel bars TMT10 mm dia and over cut to length bent to shape required including bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, concrete all as specified and directed.

All as per item No 22 above but 6mm to 8mm dia, complete all as specified and directed.

M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-290 (Gde E-165), complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixing with self taping screws, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks (old size bricks) straight or curved on plan exc 6 m mean radious built in cement mortar 1:6, complete all as specified and directed.

Hard core of broken stone gauge n.exc 63mm, deposited, spread and leveled in layers n.exc 15 cm thick, watered and rammed to a true surface required for grade & slope correction, complete all as specified and directed.

M&L 25mm thick cement concrete type B-0; 1:2:4 using 12.5mm graded crushed stone aggregate as in base finished even and fair surfaces without using extra cement, complete all as specified and directed.

Cutting holes in brick walls exc. half brick but not exc. one brick built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required distemper to wall etc, complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47 mm made ot of 5 mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specifiecation and drawing, complete all as specified and directed.

S&F Factory Made Solid PVC Moulded with particle board core Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

S&F Powder coated aluminium frame for doors, windows, ventilators /partition with one or more rebates including joining cleat for fixing etc. complete all as specified (minimum thickness of powder coating 50 micron), complete all as specified and directed.

S&F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, zing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws complete all as specified (minimum thickness of powder coating 50 micron), complete all as specified and directed.

S&F Powder coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung/fixed type without sash bars, aluminium section weighing 0.55 kg/ m including necessary joining cleats, zing clips, rubber neoprene packing, anodised aluminium snap beading screws anodised aluminium fittings such as peg stay, Tower bolt 150mm long 1 No. hinge type B-21, 100 mm long 2 Nos, suitable handle 1 No, complete all as specified and as directed

S&F 150mm aluminium anodised, barrel tower bolt of extruded section and fixed, complete all as specified and directed.

S&F extruded section aluminium alloy handles, fabricated type anodised of 150 mm, complete all as specified and directed.

S&F mild steel butt hinges cold rolled medium weight of 100mm long, complete all as specified and directed.

Supply and fixing Steel ventilatore with centre hung shutters including two pairs of barss cup pivots,catch spring and pully wheel etc complete, complete all as specified and directed.

Supply only 4 mm thick figured glass,pinhead ordinary quality, in square n. exc 0.5 sq.m each pane, complete all as specified and directed.

M & L for providing precast cement concrete 1:2:4 Type B1 using 20 mm garded stone aggregate in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4, complete all as specified and directed.

M&L rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces & finished even and smooth without using extra cement, complete all as specified and directed

M&L rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces & finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm bore GI tubing medium grade with all fittings complete fixed to wall, ceiling or laid in floors, complete all as specified and directed.

M&L for 20mm bore GI tubing medium grade with all fittings complete fixed to wall, ceiling or laid in floors / trenches, complete all as specified and directed.

M&L for 75 mm outlet dia PVC (SWR) multi floor trap, plain with grating including joint with solvent cement, complete all as specified and directed.

M&L for PVC (SWR) gully trap 125/ 110 mm setting and jointing with solvent cement, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socked in any length with rubber ring joints laid in trenches or in floor, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socked in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socked in any length with rubber ring laid in trenches or in floors, complete all as specified and directed.

S & F 110mm bore PVC (SWR) bend of any radius, complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bend of any radius, complete all as specified and directed.

M&L Coloured Glazed ceramic tiles in vertical surface 350X250X7mm / 450X350X7mm thick in and including 10mm thick cement mortar 1:4 and set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors in and including 15mm thick screed bed using cement mortar 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L for Vitrified ceramic tiles jointless of size 10 mm thick light shade, area of each tile not exceeding 0.36 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed including taking down old screed bed complete, complete all as specified and directed.

All as per item No 56 above but as in skirting over rendering 10mm thick in cement mortar 1:4.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed.

S&F in fix 10 litres PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and PVC flush pipe 32mm dia etc comlete.

S&F PVC connection pipe 15mm dia with PTMT nut for length 750mm, complete all as specified and directed.

S&F wash down water closet (Pedestal pattern) including seat cover and stainless steel water jet including connection to drain pipe (outgoing pipe) and to flush pipe, anti syphonage pipe etc, complete all as specified and directed.

S&F vitreous china wash hand basin white flat back size 550mmx400m excluding taps waste chaina and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand but including waste coupling and waste pipe, complete all as specified and directed.

Supply and fixing fancy type pillar taps cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle of 15mm bore, complete all as specified and as directed.

Supply and fixing fancy type stop valve cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle of 15mm bore, complete all as specified and as directed.

Supply and fixing fancy type bib tap cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle for iron pipe or brass ferrule and fixing of 15mm bore pipe, complete all as specified and as directed.

S & F rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 ltrs, complete all as specified as as directed.

S&F 20 mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of white wash etc, complete all as specified and directed.

M&L for preparation of new plastered surfaces on ceiling and applying two coats of white wash etc, complete all as specified and directed.

M&L for preparation of new plaster surfaces of wall and applying two coats of synthetic enamel paint over a coat of priming paint plaster coat using min 3 tints in camoflaging pattern, complete all as specified and as directed.

S&F in repair vitreous china urinal Half stall type white (minimum) with grating and union for discharge pipe (excluding flushing cistern and flush pipe and waste pipe) but including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back including waste coupling and discharge pipe, complete all as specified and directed.

Supply and fixing urinal spreader of cast copper alloy and fixing of 15mm bore pipe, complete all as specified and directed.

S&F soap dish vitreous chine white approximate size 160X160X90mm etc, complete all as specified and directed.

S&F health faucet mild steel chromium plated suitable for 15mm dia etc, complete all as specified and directed.

M&L sand filling under floors or in foundation, complete all as specified and directed.

M&L for 80mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade laying over 25mm thick sand cushioning, complete all as specified and directed. Note :- 25mm thick sand cushioning shall be measured and paid seperately.

S&F 5mm thick plain colour PVC sheet in strips& channel feathered at the edges for fixing on solid pvc wall lining, insulated pvc wall liningand solid PVC partions inclusive of solvent cement and fixing at site, complete all as specified and directed.

S&F 7mm thick pvc laminated ceiling board of size 595mm x 595mm in without anodised aluminium snap grid ceiling fixed with screw as per manufacturers instructions, complete all as specified and as directed

M&L for Point wiring using proper colour coding complete with 1100 Volts grade 1.5 Sqmm, single core, PVC insulated, unsheathed cable with multistranded copper conductor with FRLS grade, confirming to IS-694 in and including PVC medium grade conduit not less than 25mm dia. ISI marked with all accessories concealed in wall/ceiling/ floor /roof etc, including GI terminal boxes with 3 mm thick plastic laminated sheet cover having necessary cutting for fixing switches/ sockets including 1.5 Sqmm PVC insulated, unsheathed, multistranded copper conductor, FRLS 1100 volts grade (green colour) as earth wire, connected to common earth dolly for:- One light point/ fan/Exhaust controlled by one switch.

All as per item No 82 above but One three pin switch socket 5 Amp outlet on same board.

All as per item No 82 above but One three pin switch socket 5 Amp outlet on independent board.

All as per item No. 82 above but with 4 sqmm PVC insulated FRLS, unseathed, cable confirming to IS-694, part-II with multistranded copper conductor cable in and including PVC conduit.

S & F Switch piano, flush type single pole, one way 5 Amp, complete all as specified and directed.

S & F Socket outlet 3 pin, 5A, flush type, complete all as specified and directed.

S & F Switch piano, flush type single pole, one way 15 Amp, complete all as specified and directed.

S & F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type, complete all as specified and directed.

S&F ceiling rose surface bakelite 65x50mm with three terminals, complete all as specified and directed.

S&F Sheet metal enclosure DB SPN, 8 way with 200 Amp rated bus bar, 240 V, double door . for fixing MCB’s, isolators etc., having IP-43 protection, flush mounting, complete all as specified and directed.

S&F amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) SPN 6 to 32 AMp in the MCB DB complete with connection testing and commissioning, complete all as specified and directed.

Supply and fixing MCB,SP, 6 Amp to 32 Amp, 240 Volt, 50HZ, 10 KA, `B` Series, making electrical connection with the help of Lugs / thimbles, complete all as specified and directed.

S&F building security light 35 Watt including fittings connection from ceiling rose to light fitting with twin core cable 23/0.0076 sqmm, complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC), complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, complete all as specified and directed.

Supply and fix Sheet metal enclosure with Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, complete all as specified and directed.

Supply and fixing LED lights fitting 4 feet Long 1x 20W, 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

M&L Earthing with galvanised steel earth plate electrode of size 60cmX60cmX6cm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m bellow normal ground level, connected to the galvanised earth lead by means of bolts, nuts and washers of galvanised iron or steel using GI or steel wire 4.00 mm dia as earthing lead as shown in electrical plate No 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on complete including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:2:4 type B-1 using 20mm grade stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI light grade earth lead protection pipe and pre-cast earth pit cover made of RCC (1:1.5:3) type A1 duly reinforced with 8mm dia TMT bar @ 150 c/c both ways, one lifting handle made of 10mm dia TMT bar embedded in cover slab and cover, wire, copper lugs etc mesh charcoal and common salt in alternate layer of 15cm thick, complete all as specified and as directed.

Supply and fixing brass gate valve /Gun Metal globe valve of size 20 mm dia bore with having iron wheel head screwed both ends, complete all as specified and directed.

Supply and laid in tranches/floors or fixed on wall for cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core including fixing materials like lugs,cable glands etc, complete all as specified and directed.

Material and labour for sand cushioning with a layer of sand 80 mm thick before laying of cable and 15 cm thick (punned down to 100 mm thick) after laying of cable in trenches/ducts, complete all as specified and directed. Note: Punned down thicknes (overall 18 cm) shall be considered for measurement and payment.

Supplying and laying, factory made unreinforced precast concrete cable cover LV type-1, flat, of size 300x180x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed.

Deol Builders (BID ID -3311216)