Providing Fire_Safety System in MeProviding Fire_Safety System in Medical College Hospital_Manjeri.

Amount

Fire & Safety System

od152903/2019_2020 : DIESEL ENGINE DRIVEN PUMP:- Supply Installation, testing and commissioning of Main Diesel Engine driven pump of centrifugal end suction type suitable for automatic operation rated for 2280 LPM at 60m head at 38HP high efficiency volute type with cast iron casing, Bronze impeller Pump coupled to a diesel engine water cooled with radiator, Complete with auto starting mechanism, 12 Volts/ electric starting equipment , Diesel tank, exhaust pipe extended up to 1.0 m.out side pump house duly insulated with 50 mm. thick glass wool with 1.0 mm. thick aluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required at 1800 RPM including supply of all accessories such as common base plate suitable foundation for engine and pump, vibration damping arrangements, Battery, coolant, lubricating oil, exhaust piping, necessary controls such as pressure switch and interconnecting cable from control panel to Battery etc.

od152905/2019_2020 : MOTOR DRIVEN PUMP:-Supply, installation, testing and commissioning of horizontal mounted end suction electric motor driven pump suitable for automatic operation rated for 2280 LPM at 55 MWC high efficiency volute type with cast iron casing bronze impeller, pump coppled to SPDP squirrel cage induction motor 30 KW /40 HP, 415V, Three phase 50 Hz. the pump set is foot mounted type including all accessories such as standared coupling, guard, common base frame pad/foundation bolts etc. complete.

od152909/2019_2020 : Supply,installation,testing and commissioning of Horizontal mounted end suction type electric motor driven two stage Jockey pump 180 LPM at 55 MWC h with cast iron casing bronze impeller,including all accessories operating on Three phase 50Hz,415V AC supply including foundation,bolts etc.complete. The pump set shall be of 3.73KW / 5 HP

od152911/2019_2020 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 25mm dia

od152913/2019_2020 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 32mm dia

od152915/2019_2020 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 40mm dia

od152917/2019_2020 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 50mm dia

od152919/2019_2020 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 65mm dia

od152921/2019_2020 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 80mm dia

od152923/2019_2020 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 100mm dia

od153093/2019_2020 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 150mm dia

od105952/2019_2020 : Supplying , fixing, testing and commissioning of 50/65mm size butterfly valve PN 1.6, bronze/ Gun metal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS as required.

od153099/2019_2020 : SITC of Butterfly valve 50mm dia

od153101/2019_2020 : SITC of Butterfly valve 150mm dia

od153103/2019_2020 : SITC of Butterfly valve 80mm dia

od153105/2019_2020 : SITC of Butterfly valve 100mm dia

od153119/2019_2020 : SITC of Non return valve 80mm dia

od153121/2019_2020 : SITC of Non return valve 100mm dia

od154811/2019_2020 : Non return valve-Supply, installation, testing and commissioning of C.I. slim seal type Non return valve with required flanges, nuts and bolts gasket etc. complete 150mm dia

od105960/2019_2020 : Supplying , fixing, testing and commissioning of 25mm size Ball valve bronze/ Gun metal seat duly ISI marked complete conforming to IS as required.

od154817/2019_2020 : Supply,installing,testing and commissioning or Air cusion vessel made of mild steel of 250mm dia with automatic air release cock,25mm dia drain valve and shutt off. The vessel shall be 120 cm in height etc.complete

od105961/2019_2020 : Providing and fixing 25mm cast iron/Brass Non -return valve of approved quality conforming to IS complete. as required

od105965/2019_2020 : Supply, installation, testing and commissioning of 20mm dia Gun metal Air Release valve

od105966/2019_2020 : Supplying and fixing single headed internal hydrant valve with instantaneous gun metal /Stainless steel coupling of 63 mm dia with cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank cap and chain as required.

od155062/2019_2020 : Supply and providing fire brigade inlet 63mm dia 2 way as required

od155064/2019_2020 : SITC of Branch Pipe 63mm dia

od156706/2019_2020 : Hose cabinet:- Supply and fixing of weather proof Hose cabinet having the size of 750 x 500 x 250mm made of 16 gauge M.S sheet with PCC supports and full front glass door and locking arrangements suitable to accommodate 2 Nos 15m long hose pipes and 1 No. branch pipe. The cabinet shall be painted to scarlet red colour Double

od105971/2019_2020 : Supplying and fixing Hose Reel with MS construction spray painted in post Office Red drum and brackets, Conforming to IS 884 with upto date amendments, complete with the following as required. (a) 30 m. long 20 mm (nominal internal) dia water hose Thermoplastic (Textile reinforced) Type-2 as per IS: 12585 © Drum and brackets for fixing the equipments on wall. (d) Connections from riser with 25 mm dia stop valve & M.S. Pipe

od156199/2019_2020 : Supply and providing pressure gauge in the existing system as required

od156201/2019_2020 : Supply and providing pressure switch wityh IP 32 enclosure protection phosphor bronze bellows as sensing element etc complete

od156203/2019_2020 : SPRINKLER BULB :- Supply, installation, testing and commissioning of sprinkler Bulb,20mm dia, 68 degree Celsius Pendent type

od156205/2019_2020 : SPRINKLER BULB :- Supply, installation, testing and commissioning of sprinkler Bulb,20mm dia, 68 degree Celsius Sidewall type

od156220/2019_2020 : Supplying,installing,testing and commissioning of optical type smoke detectors with solid stage design, indicating lamp, mounting base etc.

od156222/2019_2020 : Supply, installation, testing and commissioning of Electric Hooter as required

od156224/2019_2020 : Supply, installation, testing and commissioning of manual call point break glass type as per standard specification.

od105977/2019_2020 : Supply, installation, testing and commissioning of Control Panel of 12 Zone complete with charger, rectifier, alarm display with all other necessary attachments with provision for Public Addressing system and battery back up .

od156258/2019_2020 : Supplying installing testing and commissioning flow switch on sprinkler distribution header on each floor and shall be connected to fire alarm panel

od156260/2019_2020 : Supplying,installing,testing and commissioning of heat detectors with solid stage design, indicating lamp, mounting base etc.

od156262/2019_2020 : Supplying and fixing of Priming tank of size not less than 1000 liters of storage capacity as required etc.

od156264/2019_2020 : SITC of Hydrant valve double with stainless steel coupling 63mm dia conforming to IS5290 with cap and chain as required

od156266/2019_2020 : Supply and providing 6kg dry chemical powder type fire extinguisher with accessories fixed on wall in position .

od156268/2019_2020 : Supply and providing Terrace pump of capacity 5HP suitable for Fire System with a discharge of 900 LPM as required

od156272/2019_2020 : Painting letters or figures of the follwing sizes with enamel paint as identfication mark to SB, DB, panel board etc as required 2.5 cm, 4 cm, 5 cm height

od156274/2019_2020 : Supply, erection, testing and commissioning of Talk back field device .

od156276/2019_2020 : Supply, erection, testing and commissioning of 6 Watt Wall mounted type Speaker for PA System.

od156278/2019_2020 : Supply & erecion of MICROPHONE for Intelligible, crisp and bright sound suitable for all type of PA applications. Supplied with quick detachable holder with 3-pin professional XLR connector & 6 mtrs. Twin core shielded low noise cable.

od156280/2019_2020 : Supply, Installation, Testing and Commissioning of solid state Amplifier of 60W RMS out put in rack, including necessory control wires, jacks etc. complete as required

od156282/2019_2020 : Copying charges of Electrical/fire Drawing per A3 sheet additional copies

od156284/2019_2020 : Charges for preparation of Electrical/fire Drawing per A3 sheet first copy

od156286/2019_2020 : Suply and providing emergency fire escape lighting system consisting 2 nos lamp ,7 AH FMF battary charging unit ,exit sign display etc in MS enclosure

od156290/2019_2020 : Supply and providing Assembly point boards of 3mm PVC foam board size not less than 16'x16' as required

od156292/2019_2020 : Supply and providing Glow SIgn boards of 3mm PVC foam board size not less than 12'x4' as required

od105982/2019_2020 : Supply, laying and clamping of 2 core 1.5 sq mm PVC insulated and PVC sheathed armoured copper cable, using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

od156340/2019_2020 : Fire Hose :- Supply, installation, testing and commissioning of Re-inforced rubber lined hose conforming to IS: 636, 63mm dia. with ISI mark 15m long and fitted with instantaneous type couplings on both ends, made of Gun metal.

od105990/2019_2020 : Supply & erection of Fire Escape rout in each floor having size 12" x 16" made of 3mm thisk acrylic sheet with glass frame

od105994/2019_2020 : Supply and installation, testing and commissioning of CO2 type fire extinguisher with4.5kg. Capacity complete with installation brackets with ISI mark IS:15222

90.14.1.2 : Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.2.1 : Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.2 : Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet

90.14.4 : Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.14.6 : Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7 : Supply and providing copper earth bus in the panel board

2.1.1 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N

od105995/2019_2020 : Providing and fixing 63A TP&N disconnector unit inside the existing panel board including drilling holes in cubicle panel, making connections, etc. as required.

od105996/2019_2020 : Providing and fixing 100A TP&N disconnector unit inside the existing panel board including drilling holes in cubicle panel, making connections, etc. as required.

od156594/2019_2020 : S & F switch disconnector fuse unit complete with handle assembly, door inter lock and padlocking arrangement of the ratings:125A,AC 23A,TPN SDF for DIN fuse

od105997/2019_2020 : Providing and fixing 200A TP&N disconnector unit inside the existing panel board including drilling holes in cubicle panel, making connections, etc. as required.

90.14.28.2 : S & F Motor starters of the following ratingsThree phase DOL starters for 0.25HP to 7.5 HP motor

90.14.28.9 : S & F Motor starters of the following ratingsFully automatic star delta starter for 50HP motor

90.14.29.2 : S & F Motor starters accessories of the followingAuxiliary contact block 1 NO + 1 NC for starters

90.14.29.3 : S & F Motor starters accessories of the followingPush button station for starters

od105998/2019_2020 : Suply & fixing the following digital meters in the panel assembly Three phase volt meter (V - RY, YB, BR, R, Y, B) of accuracy class

od105999/2019_2020 : Suply & fixing the LED indicators for all voltage ranges - Red, Green, Yellow or Blue Colour

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

od106001/2019_2020 : Supply and wiring with PVC insulated stranded single core copper conductor cables for interconnecting the control devices/ equipments including the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required. 1.5Sqmm single run

od106002/2019_2020 : Supply and fixing Danger notice board of size, 125 x 75 mm

90.12.7.13 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3 core 6 sq mm with factory made clamp

90.12.7.17 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3 core 35 sq mm with factory made clamp

90.12.7.31 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 95 sq mm

90.12.5.31 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 95 sq mm

90.12.10.3 : Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation63/50 mm or nearest size

od156598/2019_2020 : Supplying siemens / tropodur type nickel plated Double compression brass cable gland for PVC insulated and PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV grade, and making end termination suitable for 2/ 3/ 3½/ 4 core cable of 6sqmm size as required.

9.1.10 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 35 sq. mm (28mm)

9.1.24 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)

90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.1.5 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.75 mm copper conductor (6 SWG)

90.16.5.3 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

90.16.5.5 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.75 mm (6 SWG)

5.3 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required.

od106114/2019_2020 : Providing and fixing 25 mm X 3 mm G.I. strip earth lead from the test joint to the earth plate

od106116/2019_2020 : Providing and fixing 2 X 25 mm X 3 mm G.I. strip test joint for earthing system

od106003/2019_2020 : Supply and providing 25x6mm brass nut and bolt etc. as required.

od106004/2019_2020 : Supply and providing 25x3mm brass nut and bolt etc. as required.

od157083/2019_2020 : No Objection Certificate Fee to be remitted to Fire Department

Bidder Name

RAYAN FIRE PROTECTION SYSTEMS