Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.7 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹16.4 L+₹95,860 (6.19%)Rejected-AOC HOUSE NO 01 B JANANA DODI OPP AKSHAY HOTEL RAI KA BAGH JODHPUR RAJASTHAN 342010 | 342010 | L2 | Rejected-AOC L2 | |
| 3 | L3₹18.8 L+₹3.3 L (21.6%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹19.1 L+₹3.6 L (23.3%)Rejected-AOC | L4 | Rejected-AOC L4 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
24 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) NO 02 JODHPUR
GE (AF) NO 02 JODHPUR
DAY TO DAY EM MAINTENANCE ON AOR OF DOMESTIC AREA INCLUDE OMQs, SMQs AND OTM BILLETS UNDER AGE EM OF GE (AF) NO 02 JODHPUR
2022_MES_570988_1
8345/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE (AF) NO 02 JODHPUR
As per Tender documents
8 documents required · 8 mandatory
₹500
GE (AF) NO 02 JODHPUR
₹40,000
Yes
6 Mar 2023
26 Dec 2022
26 Jan 2023
26 Dec 2022
24 Jan 2023
11 Jan 2023
26 Dec 2022 - 2 Jan 2023
Amount
Taking down carefully copper/aluminum point wiring (Light/ fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. stacking at site for reuse or removing materials to store for keeping in for taking credit and making good the disturbed surfaces / walls/ floors etc. complete all as specified & directed.
M&L for point wiring with 1.5 Sq. mm, multi-stranded copper conductor, single core, PVC insulated and unsheathed cable for phase and neutral, including 1.5 Sq. mm PVC insulated unsheathed multi-stranded copper conductor single core cable as earth continuity conductor (in green colour) connected to common earth dolly, drawn in and including PVC Casing and Capping, GI terminal boxes 1.2mm thick fixed flush to wall surface, covered with & including 3 mm thick plastic laminated sheet top cover for mounting switch and sockets etc. complete all as specified and directed for following : -
One light point/exhaust fan point controlled by one switch or one ceiling fan point controlled by one switch & electronic type fan regulator.
One light point controlled by two Nos 5 Amps switch two way.
One 3 pin 5 Amp switch & socket outlet on same board with other switches.
One 3 pin 5 Amp switch & socket outlet on independent board.
One bell point controlled by one bell push switch 5 Amps.
All same as per item Srl No 2.00 here-in-above but wiring using 2.5 sqmm multi-stranded copper conductor, single core, PVC insulated and unsheathed cable, including 2.5 Sq. mm PVC insulated unsheathed multi-stranded copper conductor single core cable as earth continuity conductor (in green colour) connected to common earth dolly for 6 pin, 15/16 Amps socket outlet on independent board etc. complete all as specified & directed.
S&F in repairs Switch piano, flush type, single pole, one way, 6 Amp
S&F in repairs Socket outlet 2/3 pin, 2-in-1, 5/6 Amp, flush type.
S&F in repairs Switch Socket combination outlet 6 pin, 6/16 Amp, flush type
S&F in repairs Ceiling rose, surface bakelite 65x50mm three terminals.
S&F in repairs Lamp holder insulated PVC/Polycarbonate/Bakelite body, fixed on PVC round or square box using necessary screw & gutti etc. complete all as specified & directed.
S&F in repairs Stepped type electronic fan regulator, socket size, flush type 230V AC.
S&F in repairs Stepped type electronic fan regulator, switch size, flush type 230V AC.
S&F in repairs electronic Bell Bul-Bul music, 230 volt, single phase.
S&F in repairs bell push, type, 6 Amps, 2 Module
Supply and fix in repairs 3 Pin, Plug Top, 16 Amps, 240 volt insulated bakelite body (Ivory/White) etc. complete all as specified & directed.
S&F MCB single pole 6-32 Amps, 240 volts, 10 kA rupturing capacity providing in DB including connection & testing etc. complete all as specified & directed.
M&L for MCB SPN 32 Amps 240 volts, 10 kA rupturing capacity providing in DB including connection & testing etc. complete all as specified & directed.
M&L for MCB SPN/DP 40 to 63 Amps 240 volts, 10 kA rupturing capacity providing in DB including connection & testing etc. complete all as specified & directed.
M&L for MCB TPN/FP, 40 to 100 Amps 415 volts, 10 kA rupturing capacity providing in DB including connection & testing etc. complete all as specified & directed.
S&F in repair Sheet metal enclosure SPN DBs, 2 way without bus bar etc. complete all as specified & directed.
Supply and fix in repairs metal clad, 2 Pin+Earth Plug Top 16 Amps, 240 volt.
Taking down carefully unserviceable storage type water heaters (Geysers) 25/50 Ltr Capacity and shifting the same for repairs works or shifting to MES E/M store yard for safe custody etc. complete all as specified & directed.
S&F in repairs Heating element, copper body chromium plated of rating 2.0 KW, 230 volts ISI marked, 8/10 inch long, dia of tube not less than 8.5mm, triangular or cup type base including rubber washer suitable for old pattern geysers complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repairs Heating element for new model energy efficient geysers, copper body chromium plated of rating 2.0 KW, 230 volts ISI marked, 10 inch long, dia of tube not less than 8.5mm, cup type base including rubber ring washer suitable complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repairs Thermostat (8/10 inch long) auto cut with thermal setting upto 80 degree centigrade, 230 V, for the geysers 25/50 Ltrs capacity as per site requirement complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs Thermostat (8/10 inch long) auto cut with trip reset push button type, 230 V, for the geysers 25/50 Ltrs capacity as per site requirement etc. complete all as specified & directed by Engineer-in-Charge.
S&F in repairs capillary type, Thermostat suitable for new generation energy efficient geyser for temperature control auto cut function, 230 V, size and capacity as per site requirement etc. complete all as specified & directed by Engineer-in-Charge.
M&L for replacement of HOT & COLD PVC water connection pipes, stainless steel braided flexible pipe 450mm long etc. complete all as specified & directed by Engineer-in-Charge. Make : Havells, Cat part No GSSGGX0030 or equivalent in makes mentioned in Appendix 'B' here-in-after
M&L for replacement of HOT & COLD PVC water connection pipes, stainless steel braided flexible pipe 750mm long etc. complete all as specified & directed by Engineer-in-Charge.
S&F in repairs, syphon assembly with rubber gasket, including nuts, bolts, washers etc. for following capacity of geysers, complete all as specified & directed:-
50 Litres capacity geysers.
25 Litres capacity geysers.
S&F in repairs inner tank, vessel made of copper sheet 22 gauge , ISI marked factory made for suitable pressure for following capacity of geysers, complete all as specified & directed:-
50 Litres capacity.
25 Litres capacity.
Taking out existing unserviceable switch board plates any type, dismantling switches carefully, stacking at site for use of serviceable switches and supply and fixing new 3mm thick masonite laminated sheet top cover fixed on 6/8 inch x 10 inch MS box and brass screw for mounting switches, sockets, regulator etc. including making necessary electrical connection with1.5 sqmm single core copper multi-stranded cable etc. complete all as specified & directed by Engineer-in-charge. Note : New Switches, sockets, fan regulators etc. if required will be measured and paid separately under relevant items.
All as per Srl item No 30.00 here-in-before but new 3mm thick masonite laminated sheet top cover, white or ivory colour, fixed on 6/8 inch x 4 inch MS box.
All as per Srl item No 30.00 here-in-before but new 3mm thick masonite laminated sheet top cover, white or ivory colour, fixed on 4 inch x 4 inch MS box.
S&F in repair sheet metal enclosure distribution board for 240 volts, 8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, tested on completion etc. complete all as specified & directed by Engineer-in-Charge.
S&F in repair sheet metal enclosure distribution board for 240 volts, 12 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion etc. complete all as specified & directed by Engineer-in-Charge.
S&F in replacement sheet metal enclosures with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB upto 20 Amps, 240 Volt capacity fixed flush to wall surface including making good to damaged surface of wall to match with existing specification and tested on completion etc. complete all as specified & directed by Engineer-in-Charge.
S&F in replacement Sheet metal enclosure distribution board TPN, 415 volts, 4 way Horizontal/vertical type as per site requirement, double door type, 200 Amps rated neutral copper bus bar for housing MCBs and including provision for fixing TPN MCB as incoming, DB fixed flush or in wall surface including making good to damaged surface of wall to match with existing specification complete etc. complete all as specified & directed by Engineer-in-Charge. Note : MCB SP/SPN/TPN will measured and paid separately under relevant item.
S&F in replacement distribution board TPN DB with protection IP-43 and provision for fixing 100A MCCB, 16kA 3/4 pole as incomer and SP/TP MCB as outgoing 6 way fixed flush or in wall surface and making good damaged surface of wall to match with its existing specification etc. complete all as specified & directed by Engineer-in-Charge. Note : MCCB will measured and paid separately under relevant item.
Taking down carefully light fitting any type from surface/recessed/wall mounting type stacking at site for re-use or shifting unserviceable lights to store for taking credit etc. complete all as specified & directed by Engineer-in-Charge.
S&F LED lights fitting 1x 20W, 220V, AC, decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose etc. complete all as specified & directed by Engineer-in-Charge.
S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm etc. complete all as specified & directed by Engineer-in-Charge.
S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm etc. complete all as specified & directed by Engineer-in-Charge.
M&L for Sub main wiring with approved colour coding as per IS, single core FRLS PVC insulated flexible multi-stranded copper conductor 1.1 KV grade drawn through & including PVC grey conduit heavy duty with necessary accessories (like bend, junction boxes etc.) including taking down old un-serviceable sub-main wiring etc. complete all as specified & directed for following sizes of wires :-. (Note : GI saddle shall be used to fix PVC conduit and distance between two saddle shall not be exceed 1.2 mtr).
Two runs of 2.5 Sq.mm main cable alongwith one run of single core 2.5 Sq.mm for continuous earth wire
Two runs of 4.0 Sq.mm main cable alongwith one run of single core 4.0 Sq.mm for continuous earth wire
Two runs of 6.0 Sq.mm main cable alongwith one run of single core 6.0 Sq.mm for continuous earth wire
Two runs of 10.0 Sq.mm main cable alongwith one run of single core 10.0 Sq.mm for continuous earth wire
Nvimal Engineers and Contractor
Nikhat nirman
Shiv Shakti Enterprises
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .