HWPK/ELECT/2024/light and AC Main/120

Amount

Attending and rectifying all type of electrical complaints of all non operational area including buildings up to 3 Mtrs at HWPK plant site, Job includes problem rectification of lights, Fans, including Temporary light cable lying/ wiring work etc. Note: Any job at ground elevation or using portable ladder.

Attending and rectifying all type of electrical complaints height up to 3 mtrs in plant operating area Job includes problem rectification including Tempory light, cable laying/ wiring work etc.Note: Any job at ground elevation or using portable ladder.

Attending and rectifying all type of electrical complaints height more than 3 mtrs any where in the plant including street light. Job includes problem rectification of lights, including cable laying at existing cable tray/cable trench Note: Any job requiring wheel mounted ladder/ scaffold .

AMC of Air Conditioners: Following jobs shall be carried out through out the contract period:- a) Bi-monthly preventive maintenance of window/split/cassette type Acs. b) Attending the day to day complains/ breakdown maintenance c) All type of maintenace like replacement of compressor, leak test, Gas charging, replacement of blower, condenser fan are under the scope of vender. Under preventive maintenance jobs are cleaning of filters, condenser and evaporator, checking of the all power connection. replacement of overheated lugs of the compressor, performance check of ACs & record the current & Temp of the cold air with the help of digital thermometer. As per the requirement supply and replacement of minor components i.e.thimbles, knobs, rubber bush etc as per requirement and cells for remote (Min 100Nos Cells to be supplied & 200 Nos Thimbles for compressor), are under the scope of vender. Detailed technical specifications is attached. Note: Digital Thermometer should be provided by the vendor and available with AC Mechanics. All tools tackles including LPG cane for brazzing are under the scope of vender

Drinking Water Coolers: Following jobs shall be carried out through out the contract period:- a) Monthly cleaning of the water storage tank of drinking water coolers with cleaning agents and steel brush including cleaning of the water collecting tray. After cleaning the tank, top cover should be sealed with brown tape b) Attending the day to day complains/ breakdown maintenance c) All type of maintenace like replacement of compressor, leak test, Gas charging, replacement of blower, condenser fan are under the scope of vender. Under maintenance jobs are replacement of overheated lugs of the compressor, . performance check of water coolers, shifting of water cooler from one location to another location as per requirement. Supply and replacement of minor components i.e. fan capacitors up to 4 micro farad (metallic), knobs, rubber bush etc as per requirement are under the scope of vender. Detailed technical specifications is attached. All tools tackles including LPG cane for brazzing are under the scope of vender

Desert coolers maintenance: Following jobs shall be carried out through out the contract period:- a) One time maintenance during the contract period desert coolers which includes supply and replacement of complete set of thick grass pad for proper and complete covering of air panel, wire mash. Supply and replacement of PVC tubes, distributor, knobs etc. as per requirement.supply & painting of all desert coolers with Gray paint. before painting red oxide to be painted b) Attending the complain of desert coolers for replacement of desert cooler fan/ pump/ regulators through out the contract. All tools & tackles including paint brush/ spray gun sufficient quantity of Red oxide & Gray paint are under the scope of vendor.

Drawl of the materials from the central stores and carrying it to sectional store arrangement of items at sectional store as per instructions of store in charge. Updating inventory status and segregation of the scrap materials and hand over to the store. (1 lot= each type of item drawn from or handed over to central stores every time)

Rotary type compressor with base rubber bush (grommet) for air conditioner Suitable for R32/R22 Make Whirphool/ Highly along with Complete Compressore wiring kit.

1.5 TR capacity Rotary type compressor suitable for R22 -4 Nos)+ LG /Voltas for R32 -4Nos+DC compressor suitable LG /Voltas for R32-2Nos (Lot Means Total Comp-10Nos)

2.0 TR capacity Rotary type compressor suitable for R22-20 Nos & DC compressor suitable LG /Voltas for R32- 2Nos (Lot Means Total Comp-22 Nos)

For drinking water cooler compressor as per requirement

Spares for AC& water cooler condenser Cooling system

Fan motor along with mounting clamps & Blade for Condenser of 2 TR / 1.5 TR air conditioner

Fan motor along with mounting clamps & Blade for1/35of drinking water cooler of various cooling capacities up to 200 ltrs.

Starting relay / contractor for all type of air conditioners

Cleaning equipments for split / cassette type AC (cover for split & cassette -Total 2 Nos & 1 No Compressed Air Pressure water Spray Pump 3L Hand Held Sprayer with extension pipe & spray nozzel as per attached technical specification

1/2" ID X 3/8" THK Foam Heat Insulated Tube for Air Conditioner Ac Pipe Foam Rubber Tube 5.9 Feet Insulation Pipe Cover 13 X 09 mm Tube

Capacitors of the following ratings (quantity as mentioned in front of them) for starting of fan/compressor of 1.5 TR / 2 TR capacity window AC / Split AC / water coolers / refrigerators / deep freezers fan.

2.5 mfd 440 volt Capacitor Terminal Copper wire Havells Make

3.15 mfd 440 volt Capacitor Terminal Copper wire Havells Make

4 mfd 440 volt Capacitor Terminal Copper wire Havells Make

15 mfd 440 volt Capacitor Terminal Copper wire Havells Make

45/4mfd Four Pin 440 volt Capacitor Terminal Copper wire Havells Make (metallic Al body)

50/4 mfd Four Pin 440 volt Capacitor Terminal Copper wire Havells Make (metallic Al body)

60/4 mfd Four Pin 440 volt Capacitor Terminal Copper wire Havells Make (metallic Al body)

Refrigerant Gas: Supply of Refrigerant gas (R-22/R-32/R410/R134 gas) as per requirement (Quantity will be executed as per actual requirement)

Supply of complete Indoor unit suitable for 2.0Tr split AC of R32

Supply of complete Outdoor coils with fins suitable for 2.0Tr split AC of R32. shape should be similar to exiting damage outdoor unit

Supply of AC LG/Voltas 1.5Tr Inverter Air Conditioner PCB, For Circuit Board

Supply of complete 22 gauge GI body Single door desert cooler along with Gril, Honey comb cellulose pads, water distribution pipe from pump to pad & Size of cooler should be not less than of size 25"(L) x 25" (W) x 25-26.5"(H). .

Supply of desert cooler spares (Lot means supply of all materials mentioned in this item as per quantity mentioned)

Submersible high capacity cooler pump having Max Head 2 Mtrs for ductable cooler

submersible type pump of reputed make MSP 350 or equivalent model

New desert cooler fan motor with capacitor along with legs (4Nos) & Mettalic blade, Out put 100 – 160 W approx, 230 V, 1 ph. AC supply, ISI marked, 500 mm sweep blade and suitable for 3-speed regulator.

Cooler Regulator Dimmer Speed Full To Zero Rotaration Air Cooler Regulator 1500 Watt For All Type Cooler Pack 1 (Cooler Dimmer Regulator)

Supply of following hardwares for use of day to day maintenance (Lot means supply of all materials mentioned in this item as per quantity mentioned):-

Electric Soldering Rod (Small/pointed ) with spring stand

Soldering wire roll (min weight-250gram)

Paste box for Soldering

Emary Paper (size 23cm x 28cm) following Paper No 400; 800; 1200 (200 Nos Paper of each size)

Anchor fashner, 6mm; 8mm; 10MM; 12mm; 16mm. (1 lot= 5 Nos i.e. 1 No of each size)

Havells Make Industrial type 3 Pin Receptical top 32A Single Phase

Havells Make Industrial type 20A SPN Metal Clad Protected Two Pin Industrial plug and Socket

Taparia 24 TPI HSS 12"All Hard Hacksaw Blade, HSS 1224

Small Steel Hacksaw Frame for Metal Cutting with Handle with Blade Size 6" 10 Spare Blades - Pack of 1

38 mm (1.5 inch) Plastic Wall Plugs/Nylon Sleeves Pkt (1Pkt-100 pcs)

Bosch AG4 Metal 4-inch Cut Off Wheel

Bosch BI241 Metal 4-inch Grinding Wheel Set

ELMAX Stud Type Terminals (Nut Driver Operated) suitable for Wire Size: 16 Sqmm,25 Sqmm & 35Sqmm. 1 Nos Quantity of each sizeTerminal block in a lot .

Dowells/ comet make double compression flame proof Nickle crome coated brass Glands Suitable for 400sqmm (Cable gland no-14)

11 KV pin insulator suitable for pole mounted Tensile Strength10 KN Porceline Creepage Distance 320mm Description

LAMCO 9Kv 10Ka Porcelain Distribution Class Lightning Arrester Rating 10KA

Dow Corning 732 Multipurpose Silicon sealant, 90ml Tube Adhesive (90 ml)

Supply & as per requirement installation of following rating Siemens make Fuse link & Fuse Base. Supply quantity is mentioned in front of each items.

3NWNS 2 Amps

3NWNS 4 Amps

3NWNS 16 Amps

3NWNS 20 Amps

3NWNS 25 Amps

3NWNS 32 Amps

Fuse holders for fuses Type 3NW20NNSF

Fuse holders for fuses Type 3NW32NNSF

3NA Size000 6 Amps

3NA Size000 10 Amps

3NA Size000 16 Amps

3NA Size000 25 Amps

3NA Size000 32 Amps

3NA Size000 50 Amps

3NA Size00 160 Amps

3NA Size1 50 Amps

Fuse base Rated current 160A- 3NH3032-0RC (Plug in) Size 00/000

Fuse puller Suitable for 3KL8 and all sizes of 3NX1011

Supply of drill bit to day maintenance quantity is mentioned in front of each items.

Hammer Drill Bit 6mm, 8 mm 10mm & 12mm length of each bit Min 100mm ( 1 set-5 Nos Bits i.e. 2 Nos of 6mm and 1 nos of each 8,10 &12 mm bits)

10mm Hammer Drill Bit,-length:-160 mm

16mm HammerDrill Bit,-length:-310mm

18mm Hammer Drill Bit,-length:-310mm

Bosch Professional HSS PointTeQ 10pcs Set, casse, Pack of 10. Bit diameter : 1 to10 mm in a Bosch plastic case for work on Matel

Supply of following Havells Modular

6A shuttered socket with ISI marking AHLKSXW063

6/16A shuttered socket with ISI marking AHLKCXW164

10AX One way switch AHCSXXW101

16AX One way switch AHCSXXW161

3M Front plate AHFPLCWV03 with fixing screw

4M Front plate AHFPLCWV04 with fixing screw

6M Front plate AHFPLCWV06 with fixing screw

8M Front plate AHFPLCWV08 with fixing screw

3 Module Polycarbonate switchboards Size4X3 AHNXMIZX03

4 Module Polycarbonate switchboards Size in inch 5X3 AHNXMIZX04

6 Module Polycarbonate switchboards Size in inch 8X3 AHNXMIZX06

8 Module Polycarbonate switchboards Size in inch 5X5 AHNXMIZV08

4M GI switchboards Box Size in inch 5X3 AHZXMIIX04

6M GI switchboards Box Size in inch 8X3 AHZXMIIX06

8M GI switchboards Box Size in inch 5X5 AHZXMIIX08

Supply of following SKF make Deep groove ball bearings for Fan

6000ZZC3 or 6000 2ZC3

6201ZZC3 or 6201 2ZC3

6202ZZC3 or 6202 2ZC3

6204ZZC3 or 6204 2ZC3

608ZZC3 or 608 2ZC3

VIJAYVARGIA ELECTRICALS