AR and MO HP PWD Division Office at Sarkaghat

P/F PVC Panelling 6 mm(six milimeter) thick with decroative surface on one face with butt jointing and screw etc. in walls, ceilling screws complete with in all lead and lift and as per the direction of Engineer-in-Charge.

P/F Beading for PVC antistatics veny liming on walls/ceilling ncluding entire carriage of materialswith in all lead and lift and as per the direction of Engineer-in-Charge.

steel work welded in built up section, framed work in celling including entire carriage of materials and direction of Engineer in charge

Half brick masonery with common burnt clay in building bricks in super structure upto floor level FPS in Cement Mortar 1:4 (one cement four sand) within all lead and lifts and as per the direction of Engineer in Charge

15mm thick Cemnent pilster in single coat on rough side of brick for interior plastering upto all floor level in cement morter 1:6 (one cement and six sand) including entire carriage of material and direction of Engineer in charge.

Providing and laying anti skid Digital Ceramic floor tiles of size 300x300 mm (three hundred into three hundred millimetre)thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and laying Wall tiles of size 300x300 mm (three hundred into three hundred millimetre)of approved colour and design as per entire statisfaction within all lead and lifts and as per the direction of Engineer in Charge

Providing and fixing 19mm (Nineteen millimetre) thick water proof termite resistant ply wood of Uniply/ Greenply or Century Ply including shelves and shutters CUP BOARD / KITCHEN CABINETS.The back side of cup board/cabinet shall be 8mm (eight millimetre) thick MDF as per detail in drawing .All internal surface of Cup board shall be laminated with 1mm mica of approved shade, including piano hinges and magnetic catcher with in all accessories etc. complete as per detailed drawing as per direction of Engineer-in-charge including all leads and lifts and carriage of material.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, No. CASCADE NXT C0207 Wall hung closet (540x365x395) in white shade of Hindware or CERA or PERRYWARE or its equivalent with sleek plus dual cistern having dual flush system including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required , as per direction of Engineer-in-charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: Wash basin of SHINE C8863 (505X405X155) in white shade of PERRYWARE/ JAQUAR / HINDWARE or its equivalent as per direction of Engineer-in-charge.

Providing and fixing 15mm (fifteen millimetre) nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 within all lead and lifts and as per the direction of Engineer in Charge

Providing and fixing 600x450 mm (six hundred millimetre into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and fixing PTMT jet spray of approved quaility and colour with 1.0 mtr (one metre) tube including carriage of material within all leads and lifts and other incidentals charges complete within all lead and lifts and as per the direction of Engineer in Charge.

Providing and fixing PTMT liquid soap container 109 mm (one hundred nine millimetre )wide, 125 mm (one twenty five millimetre) hight and 112 mm (one hundred twelve) distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms :Kent touchless Sanitiser/ Liquid soap Dispenser-1000ml, white.

Providing and fixing 15 mm (fifteen millimetre) C.P. brass pillar taps, in white shade of PERRYWARE/ JAQUAR / HINDWARE or its equivalent as per direction of Engineer-in-charge.

Providing and fixing 15 mm (fifteen millimetre) nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms within all lead and lifts and as per the direction of Engineer in Charge.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, (six hundred forty five millimetre) width 78 mm (seventy eight millimetre) and effective height of 88 mm,(eighty eight millimetre) weighing not less than 190 gms.within all lead and lifts and as per the direction of Engineer in Charge.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White within all lead and lifts and as per the direction of Engineer in Charge.

Providing and fixing to wall celling and floor galavainzed mild steel tubes tube fitting and clamps including making good the walls as per direction of Engineer in charge G.I pipe 15 mm(fifteen millimetre)White within all lead and lifts and as per the direction of Engineer in Charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm ( one hundred ten millimetre) diameter

Providing and fixing a PVC plain bends ISI marked including fixing with approved adhesive etc. complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals

Providing and fixing ISI marked high pressure PVC spigot and socket, waste and ventilating pipes including fixing with approved adhesive etc. complete. 110 mm one hundred ten millimetre) within all lead and lifts and as per the direction of Engineer in Charge.

Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 90 mm (one hundred ten millimetre intoninety millimetre) within all lead and lifts and as per the direction of Engineer in Charge.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 8"within all lead and lifts and as per the direction of Engineer in Charge.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete, within all lead and lifts and as per the direction of Engineer in Charge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessar accessories and screws etc. complete.

Providing and Fixing Clear Glass 5mm thick

Size 0.84 X 0.48 5 mm (zero point eighty four into zero point forty eight point five millimetre)Thick

Size 0.53 X 0.41 5 mm (zero point fifty three into zero point four one three millimetre )Thick

Providing clear glass 8 mm eight millimetre thick for E.E Table 1.85 x 1.70 (one point eighty five intoone point seventy)

Providing and fixing PTMT grating of approved quality for floor, gully or nahani trap including carriage of materials within all lead and lifts and as per the direction of Engineer in Charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia. as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals as per the direction of Engineer in Charge.

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge. Make :-Havells (REO) , Goldmedal (GIFa) ,Anchor ( Penta) ,Legrand (arteor) , L&T (Entice)

1 or 2 Module

6 Module

8 Module

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required complete in all respect as per entire satisfaction of Engineer- in- Charge. . Make:-Hevells / Finolex / RR Cable /KEI /Grandley

1 x 1.5 sq. mm (one into one point five square metre)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge. Make :-Havells (REO) , Goldmedal (GIFa) ,Anchor ( Penta) ,Legrand (arteor) , L&T (Entice)

5/6 amps switch

3 pin 5/6 A socket outlet

15/16 A switch

6 pin 15/16 A socket outlet

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required complete in all respect Make : Anchor / AKG / RKG / Precision / Diplast.

25mm dia (twenty five millimetre)

Providing and installation of LED Down Light Recess mounting Round / Square type LED Downlight with polycarbonate housing ,anti glare polycarbonate diffuser,surge protection 2.5 KV luminaire efficacy > 85lm/Watt with minimum 25000 burning hours,THD<15% in white finish and seprated energy efficient constant current, non-integral, electronic driver; relevent LM 79/80 complaince from UN/NABL Labsuitable for input voltage: AC 140-270 V, 50/60Hz, Guarantee of LED fittings including LED driver 2 years against manufacturing defect. complete with all accessories, connections, testing etc. as required complete in all respect as per entire satisfaction of the Engineer in charge.(Make : Wipro / Bajaj / Goldmedal /Panasonic ,Phillips / Hevells/ Chengi )

LED Down Light Lumen output 425

LED Down Light Lumen output 1020

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge. Make :-Havells (REO) , Goldmedal (GIFa) ,Anchor ( Penta) ,Legrand (arteor) , L&T (Entice)