Construction of various Anganwadi Building group B of Valsad district under DGVCL CSR Initiative 2025-26

Name of Work :- Construction of various Anganwadi Building group B of Valsad district under DGVCL CSR Initiative 2025-26

DAKSHIN GUJARAT VIJ COMPANY LIMITED

Sr. Item of work Quantity for 9 Rate incl 1% LC unit Amount for

No. (Nine) nos of (In Rs.)

1 Excavation for foundation up to 1.5 M depth including sorting out and stacking of useful materials and 808.20 149.83 Cu.Mt.

disposing of the excavated stuff up to 50 meter lead.(B) Dence or hard soil.

2 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful 261.90 162.56 Cu.Mt.

materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

3 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- Graded stone aggregates 40 74.70 3005.76 Cu.Mt.

mmnominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth (upto

4 Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of 115.20 4705.59 Cu.Mt.

formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns

5 Granular Sub Base 15.75 1193.07 Cu.Mt.

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing

in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts,

spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting

with vibratory power roller to achieve the desired density, complete as per specifications and directions of

Engineer-in-Charge.

With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBRValue-30

6 Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork 56.70 8823.36 Cu.Mt.

and excluding the cost of reinforcement for reinforced concrete work in (D) Columns, Pillars posts and

struts all floor (Cement Level 380 Kg)

7 Providing and laying damp proof course 25mm thick cement concrete 1:2:4 (1 Cement : 2 coarse sand : 73.80 311.64 Sq.Mt.

4 stone aggregate 10mm nominal size) and curing complete

8 Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork 112.50 6555.45 Cu.Mt.

and excluding the cost of reinforcement for reinforced concrete work in (C) Beams all floor (Cement Level

9 Brickwork using common burnt clay building bricks having crushing strength not less than35kg./Sq.Cm. in 155.70 4348.45 Cu.Mt.

foundation and plinth in Cement Mortar 1:5. (1 Cement : 5 -fine sand)(C) Fly Ash Bricks

10 Filling available excavated earth (excluding rock in trenches plinth, sides of foundations etc. in layers 684.90 130.39 Cu.Mt.

not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering).

11 Filling in foundation and plinth with murrum or selected soil in layers of 20cm thickness including 603.90 289.06 Cu.Mt.

watering ramming and consolidating etc. complete

12 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- crushed stone aggregates 20 35.10 3005.76 Cu.mt.

mm nominal size) and curing complete including cost of formwork in Plinth Slab

13 Brickwork using common burnt clay building bricks having crushings trength not less than35kg./Sq.Cm. in 163.80 4623.43 Cu.Mt.

superstructure above plinth level upto floor two level in Cement Mortar 1:5. (1-Cement : 5-fine sand)(C)

Fly Ash Bricksl

14 Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork 11.70 6811.44 Cu.Mt.

and reinforcement for reinforced concrete work in (C) Slabs,landing,shelves,Balconies Lintels, Beams,

Girders and Cantilever upto floor two level.

15 Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork 3.60 4551.2 Cu.Mt.

and reinforcement for reinforced concrete work in (B) Walls, from top of foundation level upto floor two

16 Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows including Indian 66.60 5338.3 Sq.Mt.

teak wood frames 10 cm x 7 cm. size including anodized alluminium fixtures and fastenings including

primer coat of approved quality and two coats of oil painting etc, complete. (ii) Fully Panelled

17 Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows including Indian 59.40 5338.3 Sq.Mt.

teak wood frames 10 cm x 7 cm. size including anodized alluminium fixtures and fastenings including

primer coat of approved quality and two coats of oil painting etc, complete. (ii) Fully Panelled

18 Providing and laying marble stone slab flooring over 20mm (average)base of cement mortar 1:6 (1-cement 178.20 2090.25 Sq.Mt.

: 6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with gray cement slurry

including rubbing and polishing complete. (A) Marble slab 25mm thick

19 Providing 15mm thick cement plaster in single coat on brick/concrete wall for interior plastering upto 1551.60 220.01 Sq.Mt.

floor two level finished even and smooth in (i) Cement mortar 1:3 (1 cement : 3 sand) with one smooth

cement neat finished last layer.(Smooth finished)

20 20mm thick sand faced cement plaster on wall up to height 10meters above ground level consisting 1991.70 300.66 Sq.Mt.

of 12mm thick backing coat of C.M. 1:3 (1 cement : 3 sand) and 8mm thick finishing coat of C.M. 1:1 (1

cement : 1 sand) etc. complete

21 Providing and laying 24" x 24" vetrified 8mm thick tile Flooring over 20mm (average) base of cement 390.60 1397.83 Sq.Mt.

mortar 1:6 (1 Cement: 6 Coarse sand)on new surface or fixing on existing flooring by adhesive material

including dismentalling of existing flooring and jointed with colour cement slurry including finished with

flush pointing & cleaning the surface etc.Complete for flooring

22 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of steps and dedo on 38.70 1141.45 Sq.Mt.

10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry

23 Providing and laying white glazed tiles 6mm thick in on Wall tile on bed of 12mm thick cement mortar 171.00 917.25 Sq.Mt.

1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement.

24 Providing and laying ordinary cement concrete M150 and finishing smooth with curing etc. complete 41.40 6771.66 Cu.Mt.

including the cost of formwork but excluding the cost of reinforcement of R.C.C. work in (iii) Slab having

more than 10cm and up to 13cm thickness

25 Providing T.M.T. Fe-500 bar reinforcement for R.C.C. work including bending, binding and placing in 32724.00 76.21 Kg

position complete up to floor two level

26 Providing and fixing M.S. Grills of required pattern to wooden frames of window etc. with M.S. Plate at 2064.60 104.04 Kg

required spacing & frame around, squre or rouhnd bar with rounded headed bolts & nuts or by screws,

coated with necessary red oxide and three coats of oil paint of shaded approved by engineer in charged

(A) Plain grill

27 Applying two coats of Birla or Asian acrylic lappy (putty) and two coats of primer of approved brand and 1550.97 40.59 Sq.Mt.

anufacture on new wall surface to give an even shade including thoroughly brushing the surface free from

mortar dropping and other Foreign matter and sand papered smooth.

28 Wall painting with plastic emulsion paint of approved brand and manufacture after application of two 1551.60 343.4 Sq.Mt.

coats of Birla or Equivalent brand putty, and a coat of primer of approved brand and after rubbing the

surface and making the surface levelled by application of lappy, on undecorated wall surface to give an

even shade including throughly brushing the surface free from mortar droppings and other foreign matter

and sand papered smooth.

29 Finishing wall with Asian Paint Apex or Equivalent (two coats) after application of Exterior Wall primer of 1991.70 262.6 Sq.Mt.

approved brand on wall surface to give an required shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose powdered materials.etc complete

30 Providing And laying broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of 344.70 747.29 Sq.Mt.

glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar out

upto surface using white cement including rounding off junctions and extending them upto 15cm along

the wall in smooth Curves, clearing with water or oxalic acid etc. over the brickbat water proofing carried

out as directed by Engineer In-charged.

31 Providing and fixing PVC Rain water spout of 50mm dia and 60cm length 54.00 101.00 Rmt

32 Constructing septic tank of 2.00 mt. x 1.50 mt. x 1.20 mt. size with necessary out side wall and two 9.00 15777.21 No.

partition walls of brick masonary making two parts of the tank, plastering tha walls in cement mortar 1:4

making all connection of pipe line and covering of the top with R.C.C. slab of cement concrete 1:2:4 with

necessary reinforcement etc. complete and providing necessary earth work on it as directed.

33 Providing sock pit of 5.0Cu.M. volume including excavating sand filling brick bats with dry masonry work 9.00 12120 No.

at top for 5cm height including covering the top with stone including providing vatas in C.M. 1:3 with

finishing curing etc. complete as directed

34 Construction of cooking platform 60 cm wide of 30 mm thich polished kota stone with brick masonary 12.60 12625 Sq.Mt.

support inclduing the approved quality steel sink in the size of 600x400x150 mm including faucetss, fixing

the sink in the stone plateform with base pipe and fixtures and kota stone shelves as per the Drawing and

design etc. complete.

35 Providing and fixing cast iron (spun) Nahni trap of the following nominal diameter of self cleaning design 27.00 606.08 No.

with C.I. Screwed down of hinged grating including cost of cutting and making good the walls and floors

100mm inlet and 50mm outlet

36 Providing and fixing wash down water closet (indian type or baby European type W.C. Pan) with 9.00 1562.37 No.

intiegral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 fine

sand) including fixing plastic seat & cover for wash down water closer with C.P. brass hinges & rubber

buffer including jet wash facilities (A) vitreous china pattern (i) white color

37 Providing and fixing wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white 9.00 1870.16 No.

including sutting holes and making good the same including fixing C.P brass waste and M.I fisher union

for washbasin or sink including fixing chromium plated bottle trap with necessary couplings. ( A ) 32 mm.

dia. ( A ) Vitreous China , (ii) Flat Back washbasin 550 mm. x 400 mm. size. ( i ) In white colour,

38 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water 225.00 91.84 Rmt

including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

39 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water 225.00 72.65 Rmt

including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing

of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

40 Providing and fixing in position cowel vent to pipes (1) 75mm 9.00 389.74 No.

41 Providing and fixing gun metal check or non return full way wheel valve (C) 25mm dia 9.00 420.63 No.

42 Providing and fixing gun metal check or non return full way wheel valve (A) 15mm dia 9.00 203.82 No.

43 Providing and fixing screw down bib taps of following size (B) Brass Chromium plated screw down bib tap 36.00 186.83 No.

44 Providing and fixing ball cock of approved quality as directed (A) Copper metal (i) 25mm dia 9.00 132.89 No.

45 Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary 4500.00 3.95 Lit

fittings and connection

etc. complete on terrace

46 Providing of Bala Work for Anganwadi Like Wall paintings, Measurements, Wall arts, Black board, 9.00 50500 Job

Nutrition chart,as per Annexure (A) Etc complete as per Directed by Engineer Incharged.

47 Drilling the Borewell till the depth (0 to 30mtrs) at which the drinking water is located and of dia 9.00 50500 Job

approved by the engineer incharged along with the Submersible Motor of approved brand and of 1.5 H.P.

and Pipe casing And top Masonary chamber of Dimensions Etc as per Directed by Engineer Incharged.

Providing and fixing Decorative gate of GI pipe and plates. Of 1.2m height and 2.1m width of good

quality with colourfull color as per directed by engineer incharge.

49 All electrical wiring including light, fan switchboard and any other fixtures as per drawings and 9.00 29290 JOB

instruction of EIC.

50 Providing and fixing Granite (15 to 18 mm thick ) Inauguration Name Plate including engraving letters 54.00 1212 SFT

onto it as directed by EIC.

51 Providing and fixing M.S. round holding down or anchor bolts with nuts and washer plates complete. 450.00 54.71 Kg

52 Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or welded in builtup for all type 6300.00 127.95 Kg

sections, in framed work, including cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer all complete as per the structural designs and directions of Engineer in

charge.Column ( 122 x 61 x 3.6mm )

53 Providing & fixing 0.55 mm thick Precoated galvalume sheet of trapezoidal profile approved make 720.00 805.98 Sqmt

,color and size mechanically moulded in required shape & size fixed to roof with necessary fixture &

fastening like hot dipped galvenised self driving and self tapping screws , clips ,neoprene and EPDM gasket

, nuts, bolts washers ,popup rivetsstich screw , sealent including overlaps and side laps and accessaries

like corner pieces apron, eaves, valley gutter, hoopers, sheet floor connectors etc. cutting , wastage with

all material, labour, tools and plants, scaffolding etc. completeat all heights. The penetration and laps

insheets shall be sealed by using proper sealents. The sheet shall have 1015 mm effective cover widthand

nominal 25 mm deep ribs with subtle suare fluting in the five pan at niminal25 mm deep ribs with subtle

square fluting in the five pan at nominal 200 mm C/C. The end rib shall be designed for anti capillary

action to avoid any seapage. The sheets shall be tothe extent possible single sheet from ridge to eaves

resulting in zero laps. The sheet shall be manufactured out of nominal 0.45 mm base metal

54 Miscellenous Item 9.00 50500.00 JOB

Misc. work/Unforseen work if required to be carried out during execution of the work which are assential

and required at stage of working as per instruction of Engineer in charge. Rate shall be paid as per SOR

Rate. Rate for Non SOR item shall be paid at approved rate by EE Civil.

Total Amount in Rs.

Total Amount in Rs.

GST @18% in Rs.

Total Amount with GST in Rs.

Total Amount with GST in Rs.