Electrification to the Physiotherapy blockLaboratorytoilet block attached to CHC Alanellur under Mannarkkad Block Panchayath.

Amount

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties,tie mounts etc.as required(RoHS compliant modular accessories)Single Control light point with 6A, plate ceiling rose - Short point (90.2.1.1 )

Single Control light point without ceiling rose - Short point (90.2.1.3 )

Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator. - Short point (90.2.1.4)

Call bell point with 6 A bell push at one end and 6 A, 3 plate ceiling rose at other end - Short point.(90.2.1.5)

Combined plug point with 6 A, 5 pin plug socket controlled by 6A switch in the same switch board as that of light points. (90.2.1.6)

Independent Plug - Short Point ( 90.2.1.7 )

Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture (90.3.20.3)

1200 mm 2X20W LED Lamp with box type fixture (90.3.20.4).

Do - directly on wall using 2 nos. flat iron brackets made from 25x6mm flat iron, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire and giving connection etc. as required.1200 mm 1X20W LED Lamp with box type fixture (90.3.22.3)

Do - including supplying and fixing ball and socket arrangements on PVC round block, suspension down rod of 19mm dia MS conduit up to 2x30cm length including painting and wiring the down rod with 16/0.20mm 3 core round copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connections etc. as required.1200 mm 1X20W LED Lamp with box type fixture (90.3.24.3)

Supplying and providing extra H.G/ ISI marked, steel conduit down rod of 19/20 mm dia 2 x 1.00 m long with 16/0.20 mm 3 core copper conductor flex wire conforming to relevant ISS or with the extended original wiring and giving connection etc. as required. (90.3.10)

Supply and fixing cast aluminium stove enamelled bulk head fitting with deep drawn anodised aluminium body,epoxy powder coated,heat resistant prismatic glass cover suitable with 7w LED bulb to wall/ceiling including giving connections with required length of 16/0.20mm PVC insulated 3 core round copper conductor flex wire conforming to to relevant ISS or extending the original wiring and making good the surface as required. (od70979/2018_2019)

Supply, conveyance, installation, testing and commissioning of pre-wired light fitting of LED Street light fitting IP 65,pressure die-cast housing with induvidual LEDs with modular secondary optics 25watts with driver and including all necessary all accessories etc in the existing GI pipe and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required - BAJAJ make BRLEP25W LED/Endura Citylite Platinum 25 LED/Osram strada plus/ phillips make.(od20530/2019_2020)

Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.25 mm dia with HG company fabricated clamps.(90.3.18.1)

Supply and fixing angle / straight brass lined skirt type, bakelite batten holder with 200mm Plastic shade and 7 W LED lamp and giving connection etc as required. (od15215/2019_2020)

Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required. 1200mm sweep - 5star rated ceiling fan complete with 300mm down rod,canopies, shackeles etc. working on 230V/240V single phase A/C (90.4.5.2)

Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.(90.4.1)

Supply and installation of suitable size MS belt type fan clamp fabricated from flat iron 40 x 6 mm, 150mm long x 2 Nos with M.S. rod bent to shape,neatly painted with 2 coats of enamel paint over a coat of red oxide primer as per IS 732 as required.(90.4.2)

Supply and providing every additional length of down rod of 15mm heavy gauge GI / WI pipe with 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming in relevant ISS or with original wiring extended including painting as required. (od20558/2019_2020)

Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core,16 / 0.20mm round copper flex wire, earthing the MS box and making good the surface as required.Ding dong bell.(90.5.1.3)

Supply,conveyance,installation,testing and commissioning of 400 mm sweep (16") Almonard supreme high speed wall mounting fan of all types using mounting brackets supplied along with the fan and giving connection including all charges.

Supply and fixing the following sizes of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required. 20 mm dia light gauge.(od15219/ 2019_2020)

Supplying and fixing of following sizes of light class PVC conduit along with accessories in surface including cutting the wall and making good the same in case of recessed conduit as required.25 mm.(od15220/2019_2020)

Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.1.50 sq.mm 2 Run (1.17.2)

1.50 sq.mm 4 Run (1.17.4)

2.50 sq.mm 2 Run (1.17.11)

2.50 sq.mm 4 Run (1.17.13)

2.50 sq.mm 6 Run (1.17.15)

4.00 sq.mm 2 Run (1.17.20)

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm) (1.27.1)

Do - 3 Module (100mmX75mm) (1.27.2)

Do - 6 Module (200mmX75mm) (1.27.4)

Do - 8 Module (125mmX125mm) (1.27.5)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 amp socket outlet.(1.24.5)

Do - Do - 15/16 amp switch. (1.24.3) (1No. For flood light control)

Do - Do - 3 pin 5/6 amp socket outlet. (1.24.4)

Do - Do - 5/6 amp switch. (1.24.1)

Supply and installation of sheet steel, phosphatised and painted,dust and vermin proof enclosure of MCB DB including copper /brass bus bar,neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall, making good the damages, colour washing etc.as required. 4way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43) (90.11.1.14)

Do - 4way (8+12) - three phase double cover. (IP42/43) (90.11.1.10 ))

Do - 6way (8+18) - three phase double cover. (IP42/43) (90.11.1.11 )

Do - 8way - Single phase Double door.(2.3.2)

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps 4 pole isolator (2.13.2 )

40 amps 4 pole isolator (2.13.1 )

40 amps 2 pole isolator 2.12.1)

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30/100 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A rating, 4 pole RCCB, 100 rnA (2.15.3)

25/32 A rating, 4 pole RCCB, 30 rnA (2.15.1)

25A rating, 2 pole RCCB, 30 rnA (2.14.1 )

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 6 A. to 32 A. ratings , SP MCB, "C" curve,10 kA breaking capacity. (2.10.1 )

Do - 40 A to 63 A TP MCB, "C" curve,10 kA breaking capacity

Do - 40A to 63A. ratings , TPN MCB, "C" curve 10 kA breaking capacity.

Do - 6 A. to 32 A. ratingsTP MCB, "C" curve,10 kA breaking capacity. (2.10.4 )

Supply and installation of switch gear units in sheet steel enclosure arrangement of the following ratings on existing angle iron frame work or directly to wall using necessary bolts & nuts, fixing the unit to wall, making good the damages, colour washing etc. including giving necessary connections as required. 100 A, 415 V, 50 Hz, AC 23 A duty, 4 pole on-load change over switch.

Supply and installation of switch gear units in sheet steel enclosure arrangement of the following ratings on existing angle iron frame work or directly to wall using necessary bolts & nuts, fixing the unitto wall, making good the damages, colour washing etc. including giving necessary connections as required. 100 Amp TP & N (2.1.3)

Supplying and fixing 4P enclosure MCB DB sheet steel phosphatised,painted,dust and vermin proof enclosure 0n surface / recess complete with connections,testing and commissioning etc.as required. For Genarator. (od12762/ 2018_19)

Supplying and fixing DP enclosure for independent mounting of MCB DB sheet steel phosphatised,painted,dust and vermin proof enclosure on surface/recess complete with connections,testing and commissioning etc. as required. (2.16))

Supplying and fixing 6A to 32A ratings DP MCB "C" curve, 10 kA breaking capacity miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections,testing and commissioning etc.as required. (2.10.3)

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable,1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages,colour washing etc.as required.2 core 6 sq mm with factory made clamp (90.12.7.2 )

4 core 10 sq mm with factory made clamp - Do - - Do - (90.12.7.40 )

4 core 16 sq mm with factory made clamp - Do - - Do - (90.12.7.41)

4 core 25 sq mm with factory made clamp - Do - (90.12.7.42 )

3.5x35 sq mm with factory made clamp. (90.12.7.28 )

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 6 sq mm. (90.12.5.2)

Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation 50/38 mm or nearest size (90.12.10.2)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 core 6sqmm (19mm) (9.1.1)

4 core 10 sq mm (25mm) (9.1.32)

4 core 16 sq. mm (28mm) (9.1.33)

4 core 25 sq. mm (28mm) (9.1.34)

3.5 core 35 sq. mm (32mm) (9.1.21)

Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed /XLPE aluminium conductor cable of 1.1 kV grade as required.3.5 core 35 sq mm (9.2.18)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2 metre long etc. with charcoal/coke and salt as required.(od14959/2019_2020)

Providing and fixing 25mmx3mm G.I strip earth lead from the test joint to the earth plate. (od14961/2019_2020)

Do - 2x25mmx3mm G.I strip test joint for earthing system. (od68978/2018_2019)

Supply and drawing bare earthing conductors of the following sizes along with wiring / cables and giving connection as required. 2.00mm copper conductor (14SWG) (od14862/2019_2020)

Do - 2.65mm copper conductor (12 SWG) (od21802/2019 _2020)

Do - 3.15 mm copper conductor (10 SWG) (od14864/ 2019_2020)

Supply and laying bare earthing conductors of the following sizes laid 0.6 m below ground level including excavating trench of suitable size and refilling etc. as required (in ordinary soil) 3.15mm copper conductor.(10SWG) (od21872/2019_ 2020)

Suplying,threading,laying and jointing of 15mm B class GI pipe with all required accessories in ground in the existing trench as protective covering to earth leads.(od21874/ 2019_2020)

Supply of superior quality 2.00mm copper earth socket and including crimping etc.as required. (od14945/2019_ 2020)

Do - 2.65mm copper conductor (12 SWG) (od21880/ 2019_2020)

Do - 3.15mm copper earth socket and including crimping etc. as required. (od21884/2019_2020)

Supply and providing12x3mm brass nut and bolt etc.as required.(od21888/2019_2020)

Do - 25 x 3 mm brass bolt & nut. (od21886/2019_2020)

Supply and fixing meter board of size 650x350x250 of Syntex type suitable for providing 3 Phase meter board and CT.(od4600/2019_2020)

Supplying and fixing100,HRCFuse Base with HRC Fuse link with connections,in the existing meter board.(od16077/ 2019_2020)

Supplying and fixing 100 A, 2 Way neutral links mounted on DMC/SMC base with connections, in existing meter board.(od16076/2019_2020)

Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps. (90.3.18.2) For Srevice Pipe

Supply and providing M8 anchor bolt hook in wall / parapet for binding support for service main.

Dismantling the existing damaged wiring points such as light points, fan point,DBs,Meter board etc.and transporting the same to store concerned. (od69685/2018_2019)

Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br>Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet,powder coated (excluding base frame) (90.14.1.1)

Supply and providing 2mm thick SMC sheet as shrouding for bus interconnection/terminations etc.including required nut & bolt etc. (90.14.2.1)

Supply and providing heavy duty 'A' section neoprene gasket in the panel board 'A' section neoprene beeding suitable for 1.60/ 2.00 mm sheet. (90.14.3.1)

Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board.(90.14.5)

Fabrication, supply & fixing main bus bar system and interconnections with electrolytic grade copper strips/rigid conductors conforming to IS1867 (with latestamendments) for bus bar arrangement with single strip per phase supported on finger type bus bar supports of adequate size,spacing between supports not exceeding 50 cm & overhang not exceeding 5cm including bending to shape, drilling holes, tinning the points of contacts, fixing heat shrinkable PVC sleeves,plated bolts and nuts with plate washers and spring washers, copper sockets for round conductors,etc. as required. (90.14.6)

Supply and providing copper earth bus in the panel board.(90.14.7)

Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices/ equipments including providing suitable size insulated sockets at the termination points or soldered properly, providing numbering ferrules for the proper identification of the wiring, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.1.50 sq mm single run with required sockets.

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 100 Amp TP & N (2.1.3)

Do - 32 Amp TP & N (2.1.1)

Do - Spredar/terminal adapter kit extended terminal for 3/4 poleTP&N disconnector fuse switch unit. (8 Pcs)

LED indicators for all voltage ranges - Blue Colour

LED indicators for all voltage ranges - Red, Green, Black, Yellow or Orange Colour

V, A, F, PF meter of accuracy class 1.0

100/ 5 A, 5 VA, 10 P 5, tape wound protection CT

100/ 5 A,5 VA,resin cast metering CT of accuracy class 0.5

Aluminium anodised legend plate of size 100 x 40 mm. with inscription of BUS BAR CHAMBER .

Aluminium anodised legend plate of size 100 x 40 mm. with inscription of CABLE ALLEY.

Bharath Technical Institute

Appu Velayudhan