CONSTRUCTION OF 400 MTR. 8 LANE SYNTHETIC ATHLETIC SMART TRACK AT M.P.SC, RAIPUR, DEHRADUN

Amount

NSI Item- Removal of the existing Synthetic Athletic Track surface and disposal of the same upto a lead of 500m, as directed by the Engineer-in-charge

NSI Item- Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material upto a lead of 500 meters, as per direction of Engineer-in-charge

NSI Item- Dismantling of WMM by mechanical by mechanical meas and disposal of the same material up to led of 500 meters, as per direction of the Engineer-in-charge

NSI Item- Providing and installation of World Athletics Approved Synthetic Track of minimum 15mm thickness with Full PUR - Full EPDM in all three layers

SOR Item- 4-9 Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 (By Mechanical Means with 1 km lead)

SOR Item- 4-1 Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.)

SOR Item- 8-1-2 Bituminous Macadam with Warm Mix Technology Providing and laying Bituminous macadam with the use of asphalt mixing plant using crushed aggregates of grading as per Table 500.4, premixed with bituminous binder and warm mix additive, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504 using the Warm Mix (WMA) Asphalt Technlogy as per IRC:SP: 101-2009. (Bitumen VG-10 @ 3.3% of the weight of mix and warm mix additive @ 0.4% of the weight of bitimen have been used for analysis purpose. The choice of bitumen will depend upon the prevailing site conditions and shall be in accordance with Clause 504 of MORD :with Bitumen VG-30

SOR Item- 5-2 Tack coat Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.

SOR Item- 8-3-2 Bituminous Concrete with Warm Mix Technology Providing and laying Bituminous Concrete with 60-90 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder and warm mix additive @ 0.4% by weight of bitumen, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects :for Grading-II (bituminous binder @ 5.4 % of mix)

DSR item- 13.1.1 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

DSR item- 5.2.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

DSR item- 5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

DSR item- 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.

DSR item- 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

DSR item- 6.1.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

DSR item- 2.27 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

NSI Item- Heavy duty foldable beam made square Pipe inside & covered with thick Water proof solid plywood. Base legs & base made of steel square pipe with spring loaded snap lock system for easy adjustment of three different required heights. 762m.m. , 838m.m. , 914 m.m. Legs are fitted into sockets grouted in to the ground. Painted with premium quality Poly urethane paint for longer life & durability. Easy to install & foldable to transport. Code: VTWB-100. Approved by World Athletics.

NSI Item- Heavy gauge aluminium features a box profile top. Held in place by 10 mm tall ribbed feet. Raised 10 mm off the track surface for rapid drainage. Each section of kerbing is milled to allow easy drop in or removal of corresponding sections. Available in Raw or anodized finish. Code: VTK-100. Approved by World Athletics.

NSI Item- Discus & Hammer Cage, consist of six (6) heavy duty 113 x 113 x 5 mm thick hot galvanized MS pipe (7 mtr high) poles and Eight (8) poles (doors) with 10 mtr (132 x 132x 8 mm) high 2 mtr wide made as per World Athletics specifications. NET is 5 mm thick (machine knitted) with 40 mm square mesh. Net is UV stabilized for long life.. Code: DHCS101. Approved by World Athleti

NSI Item- Welded stainless steel construction. Comes with blanking board made of aluminium. Sockets at bottom for drainage of water. Code: PVT-SS1. Approved by World Athletics.

NSI Item- Latest design take-off board system, made of solid wood. Welded aluminium tray protects take-off area and facilitates easy replacements of take-off board and plasticine board. Comes with heavy construction aluminium blanking lid for durability. Code: VSTB-100. Approved by World Athletics

NSI Item- Stop board made of fibre designed for depressed pad. Code: STB-F100. Approved by World Athletics

NSI Item- Vinex IAAF certified conversion circle made of fibreglass sections with reinforced steel. Sections are designed to quickly convert the already set Discus circle to a Hammer circle. Code: VCC-100. Approved by World Athletics.

NSI Item- Made of thick Aluminum alloy in angle type construction. Constructed in two halves. Best quality nickel plated hardware used for assembling the unit. Easy to assemble and can be folded very easily for convenient transportation & storage. Code: DSHC-SPA10. Approved by W orld Athletics.

NSI Item- Made of thick Aluminum alloy in angle type construction. Constructed in two halves. Best quality nickel plated hardware used for assembling the unit. Easy to assemble and can be folded very easily for convenient transportation & storage. Code: DSHC-SPA10. Approved by World Ath letics.

NSI Item- Made of thick Aluminum alloy in angle type construction. Constructed in two halves. Best quality nickel plated hardware used for assembling the unit. Easy to assemble and can be folded very easily for convenient transportation & storage. Code: DSHC-A100. Approved by World Athletics.

NSI Item- SmartTracks MCD400 + MCD Sleeve 145 (12039), SmartTracks Sensor Dx5.0 diagnostics (95666) & SmartTracks lifting Tool ( 11041)

rajesh goel thekedar (BID ID -353089)