Construction of Bridge over Danoa Nallah Guler Nandpur Road Km. 0/0 to 5/135

Amount

Preparation of sub grade by dressing to cambor (Earth work for the cutting involved for sub-grade to be paid for separately depending upon the classification of soil completed as per HPPWD specifications and as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rates including Royality, Malkhana, Octroi, toll tax, GST tax or any other taxes imposed by the Government

Consolidation of sub grade with road roller including making good the undulation etc. with earth or quarry soil etc. and rerolling the sub-grade complete as per drawing and MORD technical specification 1600 & 1300 and as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of material with in all leads lifts and other incidentals. The rates including Royality, Malkhana, Octroi, toll tax, GST tax or any other taxes imposed by the Government

Construction of Gravel/Granular sub base/base 125mm (one hundred twenty five millimeter) compacted thickness by providing well graded material of nominal maximum size 80mm (eighty millimeter) Type ‘A’ conforming to table 2.3 of IRC- SP-77 -2008 and spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with tractor mount appropriate rotavator at OMC and compacting with three wheel 80-100 (Eighty–Hundred) kN static roller to achieve the desired density, complete as per MORD Technical specification clause 401 and as per the direction and entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, toll tax, sales tax, GST or any other taxes imposed by the Government.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and technical Specification Clause 406.The rates including Royality, Malkhana, Octroi, toll tax, GST,sale tax or any other taxes imposed by the Government.

Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including cleaning of road surface with mechanical brooms and spraying primer with bitumen emulsion pressure distributor at the rate of 0.85 kg (zero decimal eight five kilogram) per square meter of road surface as per MORD Technical specification clause 502 and as per the direction and entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates including Royality, Malkhana, Octroi, toll tax, GST,sale tax or any other taxes imposed by the Government.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg ( zero point two five to zero point three zero killogramme ) per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per technical Specification Clause 503 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, toll tax, GST,sale tax or any other taxes imposed by the Government.

Providing and laying 30mm (Thirty millimetre) compacted thick bituminous concrete with min 40-60 TPH (forty- sixty tonne per hour) hot mix batch type/drum type plant with electronic control Grading-II using crushed aggregate 13mm (Thirteen millimetre) nominal size of specified grading premixed with bituminous binder VG-30 (Viscosity Grade-Thirty) @ 5% (five percent) of mix weight transported to site, laid with censor paver finisher hydraulic with censor control to the required grade, level and alignment over a previously prepered surface and rolling complete with smooth wheeled roller 8-10 (Eight-Ten) tonne capacity for initial break down rolling and vibratory roller 8-10 (Eight-Ten) tonne capacity or pneumatic type roller of 12-15 (Twelve-fifteen Tonne) with tyre pressure of atleast 0.56mpa (Zero point five six ) for intermediate rolling and finish rolling with 6-8 (six-eight) tonne smooth wheeled tandom roller to achieve the desired compaction as per MORTH technical specification clause No. 509 including hauling of material in all leads, lifts as per entire satisfaction and direction of Engineer-in-Charge including carriage of material within all leads,lifts and other incidental. The rates including Royality, Malkhana, Octroi, toll tax,GST, sale tax or any other taxes imposed by the Government.

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35 ( thirty five ) in accordance with ministry of road tranport specifications ( Latest revision ) and IC code the finished to be level , uniform and free from streaks and holes including carriage of all labours, equipments and materials to various location through all modes of tranpottation,including carriage of material within all leads,lifts and other incidental. The rates including Royality, Malkhana, Octroi, toll tax,GST, sale tax or any other taxes imposed by the Government.

shushil kumar sharma govt contractor