Operation and Maintenance of Trunk Main (Head works at PABR Dam to Hindupur) of NSRDWSP for supply of wterto 931 habitations for the period from 01.4.2025 to 31.03.2026 Electromechanical

Supply and Fixing of 11 KV 800A VCB Panel with 1 Nos. VCBs suitable for 50Hz 3-phase system, suitable for 26.3kA/3sec short circuit withstand capacity & 26.3kA/1sec Internal Arc capacity

Supply and fixing 11 KV 800A VCB Panel with 1 Nos. VCBs suitable for 50Hz 3-phase system, suitable for 26.3kA/3sec short circuit withstand capacity & 26.3kA/1sec Internal Arc capacity

Removing Cables - Instrumentation cables and Power cables of Motor at Terminal box by opening cover of terminal box

Removing Motor Top Cover (Non Driving End) and Cooling Fan -(The is because the EOT lifting hooked clearance)

Removing motor from Motor Stool of Pump ,lifting of motor and keeping in maintenance bay.

Removing Nut and Bolts at pump delivery flange . Removing Pump discharge Head .

Erection -Termination and Tightening of Cables - instrumentation cables and Power cables of Motor at Terminal box by opening cover of terminal box

Aligning and Fixing of motor from Motor Stool of Pump ,lifting of motor and keeping in maintenance bay.

Supply of New Shafts SS410 Materials for V.T Pump which was damaged Purchase Raw Shafts Machining, Balancing and Thredding Transportation to site and within City for machining Sleeve Material -Machining , Fixing and thredding

Machining, threading and supply of Line Shaft Coupling SS410

Machining, threading and supply of Line shaft sleeves SS410

Supply of Thordon Bearings (Cut less Rubber)

Supply of Bearing Oil

Supply of New Hardware and Gasket for fixing column pipes

Supply and fixing of 11 KV 800A VCB Panel with 1 Nos. VCBs suitable for 50Hz 3-phase system, suitable for 26.3kA/3sec short circuit withstand capacity & 26.3kA/1sec Internal Arc capacity

supply and fixing of EL & OL Relays in panel board at PABR head works and Basampalli ( As per approved NSRDWSP

Supply and fixing of energy analyzer (multi-function energy meter) with LCD/LED display capable of minimum 20 numbers electrical parameters display vith 1A/5A CT input for LV/ HV network, RS 485 communication port etc. complete in all respect.

Supply and fixing of 12V 42 AH SMF battery with 3 years warranty including wire leads, connections etc complete.

Supply and fixing of 11 KV 800A VCB Panel with 1 Nos. VCBs suitable for 50Hz 3-phase system, suitable for 26.3kA/3sec short circuit withstand capacity & 26.3kA/1sec Internal Arc capacity

Supply and fixing of energy analyzer (multi-function energy meter) with LCD/LED display capable of minimum 20 numbers electrical parameters display vith 1A/5A CT input for LV/ HV network, RS 485 communication port etc. complete in all respect.

Supply and fixing of 12V 42 AH SMF battery with 3 years warranty including wire leads, connections etc complete.

supply and fixing of 400A 3 Pole MCCB,36/35 KA at Kekathi

supply and fixing of 800A 3 Pole MCCB,50 KA at Amarapuram

Supply and fixing of 12V 42 AH SMF battery with 3 years warranty including wire leads, connections etc complete.

11 KV 800A VCB Panel with 1 Nos. VCBs suitable for 50Hz 3-phase system, suitable for 26.3kA/3sec short circuit withstand capacity & 26.3kA/1sec Internal Arc capacity

Supply and fixing of energy analyzer (multi-function energy meter) with LCD/LED display capable of minimum 20 numbers electrical parameters display vith 1A/5A CT input for LV/ HV network, RS 485 communication port etc. complete in all respect.

Supply and fixing of 12V 42 AH SMF battery with 3 years warranty including wire leads, connections etc complete.

Supply and fixing of Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2, without bypass upto 400 mm dia (300 mm DI Sluice Valves)

Supply and fixing of Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2, without bypass upto 400 mm dia (250 mm DI Sluice Valves)

Manufacture, Supply and delivery of DI D/F Butterfly Valves, Body and disc of Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Double eccentrically designed Disc., with renewable soft seal on the disc and Integral Body seat face of nickel-chromium overlay welding (Fusion Bonded) micro finished, 100 % leak tight in both directions, Medium free bearings and with minimum thickness of 250 microns Fusion bonded food grade epoxy coating and 1200mm dia. and above food grade liquid Epoxy coating of minimum 150 microns applied on both body and disc inside and outside. Face to face dimensions as per EN558-1/IS 13095 body or IS: 13095 long body design standard as per EN 593/IS 5163 Flange drilling as per EN 1092-2/ IS 1538 the Valve should be suitable for buried application. (150 mm Butterfly Valves)

Cost of MS Flanges including cost of Bolts, Nuts, Rubber Packing etc., complete and flange thickness con firming to IS:7322 - 1985 and flange dimensions confirming to IS: 1538-1993 excluding Cost of MS barrel including cost and conveyance to site, excluding Taxes etc., complete. (Rate per each (400 mm MS Flanges)

Cost of MS Flanges including cost of Bolts, Nuts, Rubber Packing etc., complete and flange thickness con firming to IS:7322 - 1985 and flange dimensions confirming to IS: 1538-1993 excluding Cost of MS barrel including cost and conveyance to site, excluding Taxes etc., complete. (Rate per each (400 mm MS Flanges (450 mm MS Flanges)

Cost of DI D/F Tilting disc Swing Check Valves Slanted seated with maximum swing of 59 degree with metallic, corrosion proof and wear resistant seat faces, Body and Disc of ductile cast iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2, PN 16 (450 mm) (450 mm DI NRV )

Supply and fixing of Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2, without bypass above 400mm dia (450 mm DI Sluice Valve)

Manufacture, supply and delivery of M.S Spirally Welded Pipes conforming to IS:3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers of 6mm dia. M.S. Rings at each end of the pipe and out coating with cement mortar (1:3) 30mm thick by short crating or gunetting duly providing wire mesh of size 50x50x3mm including cost of all materials, labor charges, transportation to anywhere in AP. (450 mm MS Pipe)

Supply and fixing of Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2, without bypass upto 400mm dia (400 mm DI Sluice valve)

Supply and fixing of of DI D/F Tilting disc Swing Check Valves Slanted seated with maximum swing of 59 degree with metallic, corrosion proof and wear resistant seat faces, Body and Disc of ductile cast iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2, PN 16 (450 mm) (400 mm DI NRV )

Supply and fixing of of DI D/F Tilting disc Swing Check Valves Slanted seated with maximum swing of 59 degree with metallic, corrosion proof and wear resistant seat faces, Body and Disc of ductile cast iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2, PN 16 (450 mm) (400 mm DI NRV )

Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2, without bypass upto 400mm dia and with bypass above 400mm dia (400 mm DI Sluice valve)

Manufacture, supply and delivery of M.S Spirally Welded Pipes conforming to IS:3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers of 6mm dia. M.S. Rings at each end of the pipe and out coating with cement mortar (1:3) 30mm thick by short crating or gunetting duly providing wire mesh of size 50x50x3mm including cost of all materials, labor charges, transportation to anywhere in AP. (1000 mm MS Pipe )

Manufacture, supply and delivery of M.S Spirally Welded Pipes conforming to IS:3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers of 6mm dia. M.S. Rings at each end of the pipe and out coating with cement mortar (1:3) 30mm thick by short crating or gunetting duly providing wire mesh of size 50x50x3mm including cost of all materials, labor charges, transportation to anywhere in AP. (800 mm MS Pipe )

Manufacture, supply and delivery of M.S Spirally Welded Pipes conforming to IS:3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers of 6mm dia. M.S. Rings at each end of the pipe and out coating with cement mortar (1:3) 30mm thick by short crating or gunetting duly providing wire mesh of size 50x50x3mm including cost of all materials, labor charges, transportation to anywhere in AP. (400 mm MS Pipe )

Manufacture, supply and delivery of M.S Spirally Welded Pipes conforming to IS:3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers of 6mm dia. M.S. Rings at each end of the pipe and out coating with cement mortar (1:3) 30mm thick by short crating or gunetting duly providing wire mesh of size 50x50x3mm including cost of all materials, labor charges, transportation to anywhere in AP. (150 mm MS Pipe )

Manufacture as per BIS: 12820/89 with S.B.R. Quality Rubber confirming to BIS: 5382/85, supply and delivery of Rubber Gaskets suitable for C.I/ D.I S/S pipes anywhere in A.P. F.O.R. Destination departmental stores including cost of material, loading, incidental handling with companies standard packing, transportation, unloading & stacking but excluding all taxes. (400 mm FR Gaskets )

Manufacture as per BIS: 12820/89 with S.B.R. Quality Rubber confirming to BIS: 5382/85, supply and delivery of Rubber Gaskets suitable for C.I/ D.I S/S pipes anywhere in A.P. F.O.R. Destination departmental stores including cost of material, loading, incidental handling with companies standard packing, transportation, unloading & stacking but excluding all taxes. (450 mm FR Gaskets )

Manufacture as per BIS: 12820/89 with S.B.R. Quality Rubber confirming to BIS: 5382/85, supply and delivery of Rubber Gaskets suitable for C.I/ D.I S/S pipes anywhere in A.P. F.O.R. Destination departmental stores including cost of material, loading, incidental handling with companies standard packing, transportation, unloading & stacking but excluding all taxes. (150 mm FR Gaskets. )

Supply and fixing of MS Flanges including cost of Bolts, Nuts, Rubber Packing etc., complete and flange thickness confirming to IS:7322 - 1985 and flange dimensions confirming to IS: 1538-1993 excluding Cost of MS barrel including cost and conveyance to site, excluding Taxes etc., complete. (Rate per each Flange). (150 mm MS Flanges )

(Rupees One Crore Twenty Five Lakhs Fifty One thousand Nine Hundred and Nine Only)