Construction of Compound Wall and Entrance Gate with name board Borewell facility for water resource Setting up of Visitors area and Fire Extinguisher

Amount

CIVIL WORKS

2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.7.1 Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock

OD29565/2025-2026 Laterate masonry with neatly dressed laterate stone of size 30x20x20cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.

OD29564/2025-2026 Laterate masonry with neatly dressed laterate stone of size 30x20x20cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.

50.2.25.1 Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

10.25.2 Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

OD31484/2025-2026 :Providing aluminium composite panel of 0.3mm thick, including cost of materials cutting, hoisting, fixing in position using stainless steel screws, nuts, bolts , Stickering,and labour charges complete as per direction of engineer in charge per the direction of site Engineer-in-charg

12.45.1 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1

13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

13.48.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

OD31201/2025-2026 :TABLE 180x90x75cm<br>Table: Material Using 25MM Prelaminated particle board for top and legs, 18MM Prelaminated Particle Board for Modesty Leg, Front panel, Drawers & Drawer Face. Providing 1 Drawer and One open Cupboard on the right side of the table. Hardware using 45CM Drawer slider, 4'' Handles etc. for Drawers. For table fittings using Minifix system of EBCO or Equivalent. Screws using patta brand

OD31202/2025-2026 TABLE 120x60x75cm<br>Table: Material Using 25MM Prelaminated particle board for top and legs, 18MM Prelaminated Particle Board for Modesty Leg, Front panel, Drawers & Drawer Face. Providing 1 Drawer and One open Cupboard on the right side of the table. Hardware using 45CM Drawer slider, 4'' Handles etc. for Drawers. For table fittings using Minifix system of EBCO or Equivalent. Screws using Patta Brand. Providing Cable manager facility and foot rest.

OD31203/2025-2026 SHO /DYSP TABLE 210x100x75CM Table: Material Using 25MM Prelaminated particle board for top and legs, 18MM Prelaminated Particle Board for Modesty Leg, Front panel, Drawers & Drawer Face. . Providing 1 Drawer and One open Cupboard on the right side of the table. Hardware using 45CM Drawer slider, 4'' Handles etc. for Drawers. For table fittings using Mini fix system of EBCO or Equivalent. Screws using Pat Brand. Providing Cable Manager facility, Foot rest etc and<br>One open Cupboard on the right side of the table. Hardware using<br>45CM Drawer slider, 4'' Handles etc. for Drawers. For table fittings<br>using Mini fix system of EBCO or Equivalent. Screws using Pat<br>Brand. Providing Cable Manager facility, Foot rest etc.

OD31322/2025-2026 SHO / DYSP SIDE TABLE 120x45x75cm STORAGE: Material Using 18MM Prelaminated particle board for top and legs & Doors. 9MM Prelaminated Particle Board for Back panel. Hardware using 4'' Handles, Auto close Hinges,Multipurpose Lock etc. Make EBCO or Equivalent. Screws using Pat Brand. For storage fittings using Mini fix System Make

OD31432/2025-2026 Supply and Installation of water purifiers for filtering well / borewell water( ISI BRAND 3000LPH) including all charges to complete as per direction of Engineer incharge at site

OD31804/2025-2026 Supplying and providing wall paneling with WPC decorative Wall Panels 8mm fixing with levels etc. Including all charges to complete as per direction of Engineer incharge at site.

OD31445/2025-2026 Supply and fixing acrylic plain transparent sheet 3 mm thick ,1.03 m diameter size with sticking of kerala police emblem with back ground strip light-fixed at reception counter including all charges to complete as per direction of engineer in chrge at site (size 1.03 m dia )

OD32581/2025-2026 Supplying, Fabricating and providing acrylic letter (letter size not less than 20cm height) of suitable colour over ACP sheet, letters internally lighting with led light of approved make letters fixed and back covers electrical connections DC drive for led including Labour charge, conveyance etc complete the work as per direction of Engineer in charge at site.

BOREWELL

23.2.1.1 Boring /drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS: 2800 ( part I), including collecting samples from different strata, preparing and submitting strata chart/ bore, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer- in- charge, beyond 90 metre & upto 150 metre depth below ground level. All types of soil300 mm dia

23.3.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS : 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer- in- Charge.200 mm nominal size dia

OD31733/2025-2026 Supply, installation, testing and commissioning of 1.50 HP 18 stage Bore well submersible pump set ISI (Kirlosker/Crompton/V-Guard/Texos make) including panel board and other necessary accessories etc complete

OD31734/2025-2026 Supplying, laying and jointing 40mm dia (6kg/cm2) HDPE pipe for water line from bore well pump to surface inside the bore including all fitting charges etc complete or above dia PVC casing (ISI marked) and labour charges of conveyance to site etc.

50.18.9.5.2 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints compete as per direction of Engineer in Charge. 40 mm dia 6 Kgf/cm2

SAINUDEEN C K (BID ID -2233510)

Bidder Name

ABDUL NAZAR M A

SAINUDEEN C K