A/R and M/O residential PWD colony at Paonta Sahib tehsil Paonta Sahib (SH Earth work, C.C. 1,6,12. R,R, masonary, brick work, form work, wood work, grading work for roof treatment, sanitary fitting, tiles work, painting and distempering etc. in typ

Amount

Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres (one point fifty milli metres)stacking the eacavated soil not more than 3 metres (three metres)clear from the edge of the excavation and then returning the stacked soil in 15cm (fiftteen milli metres). layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in all leads, lifts & other carriage of material as perdirection of entire satisfaction of Enginer - In - Charge.

Providing and laying cement concrete 1:6:12 (1 cement:6 sand : 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in Foundation and plinth Cement Mortar 1:6 (1 Cement : 6 Sand ) with in all leads, lifts & other carriage of material as perdirection of entire satisfaction of Enginer - In -charge..

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement :six sand : twelve graded stone aggregate 20mm (twenty milli metres)nominal size) at plinth level in Cement Mortar 1:6(one cement:six sand) Second Class Bricks with in all leads, lifts & other carriage of material as perdirection of entire satisfaction of Enginer - In -charge.

Brick work using common burnt clay building bricks in foundation and plinth in Cement Mortar 1:6 (one Cement : six Sand) Second Class Bricks Cement Mortar 1:6 (one Cement : six Sand) Second Class Bricks with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In -charge.

Half brick masonry in common burnt clay building bricks in Cement Mortar 1:4 (one cement:four sand) Second Class Bricks with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge.

Providing from work of ordinary timber plankings so as to give a rough finish including centring,shuttering, strutting and propping etc. height of propping and centring below supporting floor to ceililng not exceeding 4 metres and removal of the same for insitu reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors,roofs landing and the like Floors etc. upto 200mm (two hundred milli metres) in thickness with in all leads, lifts & other carriage of material as perdirection of entire satisfaction of Enginer - In - charge.

Providing and laying cement concrete work 1:2:4 (one Cement : two Sand: four graded stone aggregate twenty milli metres) 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in Suspended Floor roofs, landing and shelves and their support balconies,beams,girders,bressumers and contilever upto floor twolevel with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In -charge.

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level as per direction of entire satisfaction of Enginer - In - charge.

Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them within all leads lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge not exceeding 3.00sq.m.(three point zero zero square metre) in area

Providing sal woodwork in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge.

Providing and fixing 35mm (thirty five milli metres)thick panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge.

Providing and fixing 35mm flush door shutters decorative type core of block board construction with frames of first class hard wood and well matched first class indian teak plyveneering with vertical grains or cross bends and face vencering on both faces of shutter with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In -charge.

Providing and fixing second class deodar woodwire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm (point fifty six milli metres)for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge.

Providing and fixing aluminium100 mm (hundred milli metres)handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - Chief.

Providing and fixing 300x10mm (three hundred multiplied by ten milli metres) aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge.

Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size) with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - Charge

Providing and fixing double action hydraulic floor spring of approved brand and manufacture (conforming to IS 6315) for aluminium door including cost of cutting floor as required embedding in floors and cover plates etc. complete as per the direction of Engineer-In-Charge I/c making good the floors with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - Chief.

Providing and laying Duro stone vetrified tiles (300x300mmx10mm) (three hundred multiplied by three hundred multiplied by ten milli metres)in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm(twelve milli metres) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - Chief.

Providing and laying granite stone in flooring 20mm (twenty milli metres)(average)thickness base of cement mortar 1:3(one cement: three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge.

Providing and laying Duro stone vetrified tiles (300x300mmx8mm) (three hundred multiplied by three hundred multiplied by eight milli metres) in grey/coloured of required shade in skirting risers of steps and dados on 12mm(twelve milli metres) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge.

15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth ) Cement Mortar 1:6 (oneCement : six Sand) with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge.

Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm (fifteen milli metres)thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within a Lead of 20 metres within a lead of 20 metres with cement mortar 1:6 (i cement : 6 sand) with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge.

Grading roof for water treatment with Cement concrete 1:2:4 (one cement :two sand four graded stone aggregate 20 mm (twenty milli metres) nominal size ) with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge.

Painting one coat(excluding priming coat)on previously painted wood and wood based surfaces with enamel paint to given and even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping With enamel paint other than white with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - Chief.

Extra above item No. for every subsequent coat of paint With enamel paint other then white with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - Chief.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on decorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - Chief.

Extra over item No 23 for every sub sequent coat of wall painting with plastic emulsion paint of approved brand and manufacture.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge.

Providing and fixing angle indian universal closet vitreous china wash down, water closet (European type W.C.pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar1:1(one cement : one sand) (seat and over to be measured and paid for separately with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge.

Providing and fixing 100mm size vitreous china 'P' or 'S' trap for water closet ( squatting pan ) including jointing the trap with the pan and soil pipe in cement mortar 1:1 (1 cement : 1 sand ) with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge.

Providing and fixing10ltrs (ten litres)capacity automatic flushing cistern with a pair of C.I. or M.S. brackets complete with fittings including C.I. syphonic apparatus, mosquito proof lid C.P. brass unions and coupling for connections with inlet, outlet and overflow pipes including cutting holes and making good the same ( overflow pipe to be measured and paid for separately) with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge.

Providing and fixing 630mmx450mm vitreous china wash basin with single hole for pillar tap with C.I or M.S. brackets painted white including cutting holes and making good the same but excluding fittings with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge.

Providing and fixing stainless steel kitchen sink of approved standard ISI make ( 610 x 460 mm with bowl depth 200 mm) with drain board and C.P. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge.

Providing and fixing 32mm (thirty two milli metres)C.P. brass waste for wash basin or sink with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge.

Providing and fixing 32mm (thirty two milli metres)M.I.Union wash basin or sink with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge.

Providing and fixing 15mm (fifteen milli metres)dia bib tap (superior or heavy type) with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge.

Providing and fixing 100mm (one hundred milli metres)C.P. floor trap with outlet size with in all leads, lifts & other carriage of material as per direction of entire satisfaction of Enginer - In - charge.

Randhir Singh

DINESH KUMAR GUPTA

SANCHIT GOEL