Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.5 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹36.4 L+₹81,537 (2.29%)Rejected-Finance | L2 | Rejected-Finance Other Than Lowest Bidder | |
| 3 | L3₹38.9 L+₹3.4 L (9.46%)Rejected-Finance | L3 | Rejected-Finance Other Than Lowest Bidder | |
| 4 | L4₹39.5 L+₹3.9 L (11.1%)Rejected-Finance A 95 SANJAY NAGAR BHARATPUR RAJ 321001 | BHARATPUR | BHARATPUR | RAJASTHAN | 321001 | L4 | Rejected-Finance Other Than Lowest Bidder | |
| 5 | L5₹39.5 L+₹4.0 L (11.2%)Rejected-Finance | L5 | Rejected-Finance Other Than Lowest Bidder |
Tender Value
₹43.8 L
EMD Value
₹87,500
Closing Date
20 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chandigarh
GE Chandigarh N Area Pin-160003
PROVN OF SEPTIC TANK, SOAK WELL INCLUDING NECESSARY ALLIED SERVICES AT CERTAIN LOCATIONS AT MILITRY STN NAHAN UNDER GE CHANDIGARH
2024_MES_644012_2
GE/CHD-90/2023-24
Open Tender
Civil Works
Item Rate
180 days
Nahan Under GE Chandigarh
Class D category a(i) for contractor enlisted in MES
7 documents required · 7 mandatory
₹500
GE Chandigarh
₹87,500
Yes
12 Jul 2024
30 Mar 2024
22 Apr 2024
30 Mar 2024
20 Apr 2024
8 Apr 2024
30 Mar 2024 - 5 Apr 2024
Amount
M&L for earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m depth, as directed by Engineer-in-charge
M&L for earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift from 1.5m to 3.0m depth, as directed by Engineer-in-charge
M&L for earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift from 3.0m to 4.5m depth, as directed by Engineer-in-charge
Excavating in trenches( Soft/loose soil) not exceeding 1.5 Metre wide and not exceeding 1.5 Metre in depth for laying of foundation, sewage/water lines etc not exceeding 10 Sqmtr on plan and getting out in any type of soil,complete all as specified.
Removal of excavated soil to a distance exc 250 metre and n.exc 500m depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified.
Returning and filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm thick using soft/disintegrated rock all specified and as directed.
Plain cement concrete (1:2:4), type B-2, using 40 mm graded crushed stone aggregate as in foundations, filling , mass concrete and sub base, complete, all as specified and directed.
M & L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:4) with old size bricks disignation 7.5 complete all as specified and directed.
M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces, in cement mortar1:4, Setting coat 3mm thick, trowelled to even and smooth finish in cement mortar (1:2) , complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces, in cement mortar1:4, Setting coat 3mm thick, trowelled to even and smooth finish in cement mortar (1:2), complete all as specified and as directed by Engr-in-Charge.
M&L providing for PCC 1:3:6 Type C-1 using 20mm graded crushed stone aggregate as in coping ,apex stone,complete all as specified and directed.
M&L for providing RCC 1:2:4 type B1 ( using 20 mm graded stone aggregate) as in manhole cover slabs etc set in CM 1:4 including necessary form work and handling and placing on manholes, complete all as specified. Note : The quoted rates shalll deemed to include for providing two handles of MS round bars 12 mm, make to shape and of length 65 cm long in each cover complete.
M&L TMT bars 10mm dia and over cut to length , bent to shape required including , cranking hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete.
M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and as directed by Engr-in-Charge.
Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC (1:2:4) type B-1 smooth finished for 150 mm internal dia of pipe, complete all as specified and as directed by Engr-in-Charge.
M&L for H.D.P.E double wall corrugated (DWC) pipes (ISI Mark) 150mm bore SN8 Class as per IS 16098 Part-II for non pressure underground drainage and sewerage applications with and including cost of special O rubber ring couplers etc, laid in trenches on concrete bed to level/gradient, jointing with appropriate class fittings as per manufacturers instruction including jointing accessories and fittings, complete all as specified and as directed by Engr-in-Charge.
M&L for Concrete bed (1:4:8 type D-2) to 150mm H.D.P.E double wall corrugated (DWC) pipes, including packing under, and haunching against the sides of pipes after they are laid and tested, complete all as specified and as directed by Engr-in-Charge.
S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
Supply and fix mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 all as specified and directed.
Material & labour for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L RCC M-30 Design mix, using 20mm graded trap stone aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, the like, any thickness, above top of footing including attached pilaster and buttresses etc., complete all as specified and as directed.
M&L RCC M-30 Design mix, using 20mm graded trap stone aggregate for concrete as in walls, retaining walls,drains; Parapet walls, basement walls, ballast walls and the like, any thickness, above top of footing including attached pilaster and buttresses etc., complete all as specified and as directed.
M&L M-30 Design mix, using 20mm graded trap stone aggregate for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, including attached pilaster and buttresses etc., complete all as specified and as directed.
M&L for formwork to faces of walls, retaining walls, abutments, parapets and stair case railing and similar works incl attached pillaster, buttresses, vertical or batter, finished rough complete all as specified and as directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping complete all as specified and as directed.
Plain cement concrete (1:4:8), type D-2, using 40 mm graded stone aggregate as in foundations, filling, mass concrete and sub base, complete all as specified and directed.
S&F 100 MM dia Cast iron soil, wast and vent pipe in any length with or without ears, with cement joints, fixed in floors , complete all as specified and directed.
S&F Cast iron 100mm bore cowls, complete all as specified and directed.(Sand cast pipes), complete all as specified and directed.
M&L Honey combing brick work of thickness 345mm with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:4) with old size bricks designation 7.5 complete all as specified and directed.
Supplying and filling brick bats (broken brick coarse aggregate ) of size not less than 63mm, complete all as specified and as directed.
Plain cement concrete (1:3:6), type C-2 using 40mm graded stone aggregate as in Plinth protection,75mm thick finished even and fair complete including necessary form work all as specified .
Forming contraction (dummy) joints 25 mm deep x 10mm wide, filled with sealing compound Grade A, complete all as specified and as directed.
Varun Aggarwal
M/S SHASTRI BUILDERS AND ENGINEERS
V K CONSTRUCTION CO
M/S SHANTI SARUP DINESH CHAND
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .