Loading
Loading…
Loading…
Tender Value
₹15.3 L
EMD Value
₹30,503
Closing Date
24 Aug 2026, 3:00 pmDue today
Executive Engineer, PWD (RnB), Bishramganj
O/o the Executive Engineer, PWD (RnB), Bishramganj
Grouting, carpeting, tack coat, seal coat surface drain
2026_CEPWD_75994_1
02/R/DNIeT/EE-BRG/PWD/2026-27
Open Tender
Civil Works - Roads
Percentage
180 days
Takarjala
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,000
₹30,503
17 Aug 2026
17 Aug 2026
24 Aug 2026
17 Aug 2026
24 Aug 2026
17 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Maintenance of bituminous surface road.
Repair to pot holes by removal of failed material, trimming the sides to vertical and levelling the bottom, cleaning the same with compressed air or any appropriate method, filled with 75 mm B.M, after applying bitumen emulsion prime coat at the bottom and bitumen emulsion tack coat on sides and on bottom as per MoRD technical specification Clauses 1900, 502, 503 and 504. | 1 | cum | 18,353.51 | ₹18,335.16 |
| 2 | Tack coat using hot straight run bitumen of grade VG-30 on bituminous surface
Providing and applying tack coat using hot straight run bitumen of grade VG-30, including heating the bitumen, spraying the bitumen, cleaning and preparing the existing road surface as per specifications: On bituminous surface @ 0.50 Kg/Sqm. | - | sqm | 41.22 | - |
| 3 | 20 mm thick Open-Graded Premix Carpet using Bituminous (Viscosity grade/ modified bitumen) Binder
Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using Viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 508. Case - I : By Manual Means
i) Bitumen of VG-30 | - | sqm | 346.02 | - |
| 4 | Seal Coat
Providing & laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade & cross fall using type A or B type C or D as per MoRD technical specification clauses 510. 1) By Manual Means.
Case-iv : Type D ( Premix with fine sand )
I) Bitumen VG-30 | - | sqm | 78.36 | - |
| 5 | Surface Drains
Construction of unlined surface drains of average crosssectional area 0.40 sqm in ordinary soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3 m and lead of 50 m (average lead 25 m) as per MoRD Technical Specification Clause 307.
(i) Surface Drains in Ordinary Soil
(A) Manual Means | - | m | 114.6 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.48 MB
17Golaghati.pdf
Tender Documents • 2.90 MB
BOQ_77361.xls
BOQ • 0.22 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].