DW Renovation of kutta pump house and open well at Vadavucode puthencruz Panchayath

Amount

Appendix A . Supply, erection testing & commissioning and maintenance during guarantee period of 2 years of CF pump set and accessories with following specification

1. Pump Supply, erection, trial running and commissioning of KWA prequalified reputed make of centrifugal pump split case set with bronze impellor, CI pump casing with base plate and coupling, Coupling guard, foundation bolts and nuts etc., complete, providing suitable concrete foundation, including cost of cement, sand, broken stone etc..complete. The duty condition of pump set is as follows. Speed < 1500 rpm Total head = 60 m Discharge = 13.96 lps

2. Motor The motor to be coupled with the pump set shall be of KWA prequalified reputed make with horizontal solid shaft foot mounted TEFC Squirrel cage induction motor suitable for the above pump. The motor shall be working in 3 phase, 50 HZ, 415V AC supply and shall conform to EEFI/IS 325. Flexible coupling shall be used for pairing the pump with motor and providing suitable concrete foundation, including cost of cement, sand and broken stone.

3. Starter The starter shall be having suitable rating and shall be provided with a. Over/under voltage protection b. Single phase preventer c. Over load with motor protection relay d. Main contactor/ by pass contactor as per IE rules and code of practice. The starter shall be full automatic with air break contact.

5. Cabling work Supply, laying, testing and commissioning of suitable size XLPE copper cables ( having size not less than 15 sq.mm) for the above pump set from panel board to starter and from starter to motor, considering energy conservation.

6. Earthing Supply of all materials and providing suitable earthing by using suitable size pipe/plate earthing GI/copper strip buried in the ground and giving double earthing to the motor, starter, panel board, etc., as per IE standards.

7. Capacitor Supply, erection, testing and commissioning of heavy duty APP capacitor with ISI for the motor to get a unit power factor

8.Valves Supply of suitable size best quality heavy duty (PN 1.6) ISI marked CI double flanged sluice vlave and non return valve with suitable pressure rating.Fitting of valves shall include proper RCC support especially for non return valves. In case of positive suction pump set sluice vlave should be in suction as well as delivery side for easy repair works.

9.SUCTION AND DELIVERY PIPE-as per the site condition CONNECTIONS:- Supply and fitting of suitable size best quality MS /CI pipe of a thickness not less than 8 mm as Suction/delivery pipe suitable for the above pump set, supplying suitable size foot valve , connecting the suction pipe and foot valve with suitable flanges, nut and bolts IR sheet, etc. complete, connecting the delivery side of the pump with the valves and with pumping main using suitable specials, providing fluid filled pressure guage etc., . If the dia of the suction pipe is 150 mm CI pipes, bends & specials shall be provided.

10.INSPECTION OF PUMP/ MOTOR/ STARTER/ PANEL BOARD FOR PUMP SETS Preparing documents for getting additional power allocation from compitent authorities like KSEB, EI etc., and getting approval for the same excluding the fees to be remitted to the authorities etc., complete

Appendix B

Dismantling of old pumpset and allied works without causing any damage to the equipments , including cable connections to pumping main and suction pipe as per the direction of deptl. Officer.

Supplying and fitting of suitable additional cables for incomer cables from KSEB main to panel board if necessary.

Bidder Name

Amount

FARADAYS ELECTRIC WORKS(GSTN-32AESPA6749NIZZ)

Bidder Name

FARADAYS ELECTRIC WORKS