C/O LIS Roura Dhatti in Tehsil Jaisinghpur District Kangra HP SubHead C/O Pump house cum attendant room, Main delivery tank, Road X,ing , Foot Path X,ing , Desiliting tank, RCC Channel, Collection tank, C/O sump well , C/O RCC Dyke etc

Amount

Excavation in foundation trenches etc. in all kinds of soil such as pick jumper work blasting soft or hard rock or by chiselling where blasting is prohibited soft/hard rock in all lifts stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge with in all leads and lifts.

Providing and laying cement concrete 1:4:8(1cement:4sand:8 graded stone aggregate 40mm nominal size and curing complete excluding the cost of form work in foundation and plinth with in all leads and lifts.

Squarred rubble masonary coursed with hard stone of approved quiality in foundation and plinth including racking out joints in cement mortar 1:4 (1cement : 4sand) in all leads and lifts.

Providing and laying cement concrete 1:2:4 (1cement:2sand:4 graded stone aggregate 20mm nominal size)and curing complete excluding the cost of form work ain foundation & plnth.-

15mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamfer and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:3 (1cement: 3sand) in all leads and lifts.

20mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamfer and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:3(1cement:3sand)with in all leads and lifts.

20 mm thick cement concrete topping 1:2 to 3 (1 cement:2 to 3 approved graded dtone agg. 4.75 mm nominal sigze & below by volumn within all leads & lifts.

Providing and fixing of M.S. plate for V-Notoch complete in all respect within all leads & lifts.

Providing and laying cement concrete 1:6:12(1cement:6sand:12 graded stone aggregate 40mm nominal size and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts.

Providing and laying cement concrete 1:3:6(1cement:3sand:6 graded stone aggregate20mm nominal size and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts.

Providing form work with steel plated 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu-reinforced concrete and plain.

Foundation footings bases of columns and mass concrete as directed by the Engineer-in-charge in all leads and lifts.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. upto 200mm in thickness as per direction and to the entire satisfaction of the Engineer-in-charge.

Beams, cantilever, girders and lintels sides and soffits of beams, beam haunchings, cantilevers bressumers and lintels not exceeding one mtrs in depth in all heights from floor as per direction and to the entire satisfaction of the Engineer-in-charge.

Edge of slab and break in floor 20 cm wide as directed by the Engineer-in-chargewith in all leads and lifts.

Vertical surfaces such as walls(any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and the like complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Providing and laying cement concrete 1:2:4 (1cement:2sand:4 graded stone aggregate 20mm nominal size)and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:-

Foundation footings bases of columns and mass concrete as directed by the Engineer-in-charge in all leads and lifts.

Suspended floor,roofs, landings and shelves and their supports balconies,beams girders, bressumers and cantilevers upto floor all level as per direction and to the entire satisfaction of Engineer-in-Charge with in all leads and lifts.

Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters buttersses, plinth and string courses etc. from top of foundation upto floor all level as per direction of Engineer-in-Charge with in all leads and lifts.

Providing, Laying mild or tor steel reinforcement for RCC. Work including bending binding and placing in position complete upto floor two level Tor steel in all leads and lifts.

Dressing of sides and preparation of Sub-grade for lining all kind of soil work as perentire satisfaction of Engineer-in-Charge.

Providing and laying cement concrete work 1:1/1/2:3 (1 cement: 1/1/2 sand: 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of from work and reinforcement for reinforced concrete work in.

Foundations, footings bases of columns and the like and mass concrete with in all leads & lifts..

Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters buttersses, plinth and string courses etc. from top of foundation upto floor all level as per direction of Engineer-in-Charge with in all leads and lifts.

Lintels, beams, griders bressumers and cantilevers upto all floor leve.

Providing & fixing 150mm dia double flanged puddle collar for conection with RCC wallswith in all leads and lifts.

laying laying ,jointing & testing of GI pipe light grade for inlet/ outlet pipe/ over flow pipe 150 mm dia complete in all leads & lifts .

Providing and supplying cast Iron Sluice valve Bir/ Kartar (with hand wheel) as per IS specification 150mm dia as per direction and to the entire satisfaction of the Engineer-in-charge.

Steel work welded in built up sections, trusses, and framed work including cutting ,hoisting, fixing in position and applying a priming coat of red lead paint in grating framed Guard, bars, ladders, railing, bars, bracket and similar work. as per direction and to the entire satisfaction of the Engineer-in-charge.

Finishing wall with water proofing cement paint of approved brand and manufacture & of required shade on decorated wall surfces (two coats) to given an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powered materials with in all leads & lifts.

6mm cement plaster to ceiling in cement mortar 1:3 (1 cement 3 sand) finished with a floating coat of neat cement and thick coat of link wash on top of wall when dry for bearing of RCC slab and bend with in all leads and lifts

Providing in RCC work smooth finising of the exposed surface with cement mortar 1:3 (One cement: Three Sand) as per direction and to the entire satisfaction of Engineer-in-Charge with in all leads and lifts.

Providing & fixing CI manhole cover and frame of 500mm internal dia cover ( medium duty) the weight of covers frame noless than 116 kg. with in all leads and lifts.

Random rubble masonry/polygonal rubble masonry un coursed brought to courses with hard stone of approved quality in foudation and plinth including leveling up ith cement concrete 1:6:12 (1 Cement 6 sand:12 stone aggregate 20 mm nominal size) at plinth level in cement mortor 1:6 (1 cement : 6 sand)) and curring complete up to floor to level in in all respect with in all leads and lifts..

2nd class brick work using common burnt clay building bricks in super structures above plinth level upto floor two level in cement mortar 1:6 (1cement: 6sand) with in all leads & lifts.

Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jumb lock jamb,beed and if reuired angle threshold of mild steel angle of section 50X25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means,adjustable lugs with split and tails to each jamb including steel butt hinges 2.5 mm thick with guards,lock strike plate and shock absorber as specified and applying a coat of approved steel primer after pretretment of the surface as directed by Engineer-in-Charge.

Profile - A

Providing second class deodar wood paneled glazed or paneled and glazed shutters for doors, windows and clerestory windows including bright finished black enameled iron butt hinges with necessary screws with second class deodar wood 40mm thick with in all leads and lifts.

Half brick masonary 2nd class common burnt clay building bricks in super structure in cement mortar 1:4 (1cement:4sand) with in all leads and lifts. as per direction of Engineer-in-charge.

Pointing on brick work with cement mortar 1:3 (1cement 3 sand) Flush pointing with in all leads and lifts..

Providing and fixing of M.S. Grills of required pattern in wood frames of windows etc with M.S. flats square or round bars with round headed bolts and nuts or by screws Plain grill.

20mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamfer and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6(1cement:6sand)with in all leads and lifts.

Providing and Fixing wire gauge shutters using GMS wire guage of IS gauge designation 85 G with wire of dia 0.56 mm for doors, windows & clerestory windows including bright finished black enamelled iron hinges with necessary screws.2nd class deodar wood with in al l kleads & lifts,..

Boulder/Sand filling for soling under the floor with in all leads and lifts.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1cement:3sand:6graded stone aggregate 20mm nominal size) including finishing of the top surface of concrete smooth with in all leads and lifts.

Constructing course rubble hammer dressede 'U' shape open surface drain with side wall 15x22 cm in cement mortar 1:6 (1cement:6sand) and inside plastering with cement plaster 1:3 (1cement:3sand) including earth work and laying 10 cmcement concrete in 1:5:10 (1cement:5sand:10 graded stone aggregate) of 40mm nominal size and 7.5 cmcement concrete 1:2:4 (1cement:2sand:4 graded stone aggregate 20mm nominal size) and finished withfloating coat to neat cement complete as per standard design with in all leads and lifts..

Providing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm dia meters bolts and nuts and wooden plug and embedding in cement concrete block 30x10x15cm 1:3:6(1cement:3sand:6 graded stone aggregate 20mm nominal size)with in all leads and lifts..

Providing and fixing M.S.fan clamp (Type-I) of 16mm dia M.S. including bend upto shape with broken end in RCC. Slab door painting the exposed position of trap all as per standard design complete with in all leads and lifts.

White washing with lime on undecorated walls surface (two coats)to give an even shade including throughly brooming the surface dirt dust mortar dirt and other foreign matter in all leads and lifts.

Distempering (Two coat) with oil bound washable distemper of approved brand and manufacture and of required shade on decorated wall surfaces to give an even shade , after thoroughly brushing the surface cleaning of the grease, dirt loos pieces of scales and also including preparing the surface even and sand prepared smooth.

Providing and fixing anodized MS. sliding door bolts anodized transparent for type required and bright shade with necessary screw etc. complete. 300x16mmwith in all leads and lifts.

Providing and fixing MS. tower bolts (Barrel type) anodized transparent or dyed to rquired shade and colour with necessary screw etc. complete with in all leads and lifts.

Providing and fixing M.S. handles anodized transparent or dyed to required colour of shade with necessary screws etc. complete with in all leads and lifts.

Painting two costs (excluding priming cost) on new steel and other metal surfaces under coat with ready mixed paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foregin matters with in all leads and lifts.

Precast terrazzo tiles 20mm thick with marble chips of specified size) laid in floors, treads of steps and landings on a bad of 25mm average thickness of cement mortar 1:6 (1cement:6sand) jointed with neatcement slurry mixed with pigment to match the shade of tiles (wherever required ) including rubbing and polishing complete with tiles of following shades silver grey with in all leads and lifts.

Applying priming coat over new wood based surface after and including cleaning the surface by thoroughly brooming oil, dust dirt grease and other foreign matter land papering and knotting ready mixed paint finishing hard primer pink)

Painting two coats(excluding priming coat)on new wood and wood based surface with ready mixed paint brushing the give and even shade including cleaning of all dirt dust and other foreign matter and sand papering and stopping with ready mixed paint other than white in all leads and lifts.

sanjeev kumar