Tenders work of supply, laying, testing and commissioning of 11/22KV ca-ble (XLPE cable will be supplied by DGVCL) with cable end termination and straight through joints kits (to be supplied by contractor) as per norms under all scheme for the year 2026-2027 for 11Kv Jai Bharat Ind Feeder under Kadodara-Ind Sub division under Kadodara Division.

Name of Work:- ARC work of Lavine. testinq & commissioninq of underqround cabte for ALL scheme in the

iurisdiction of Kadodar lnd S/dn of Kadodara Division.

5r. Item Code Delcription Unit Totat Rate

9925000001 Labour charge for excavation of cable trench of 400mm width x 12OOmm depth, in Meter

any type of soil for laying of cable of size up to 240 rnm2 (For additional cable

mm additional width shall be considered i.e. halt trench length is to be considered

,925000002 Labour charge lor excavation ot cable trenci of 600mm width x 't2oomm depth, in Meter

2 any type of soil for laying of cable ot size up to 2it0 mm2 (For additional cabte 2OO

Tm additionalwidth shall be considered i.e. halftrench length i9 to be considered

1925000003 -abour charge for excavation of cable trench of400mm width x 'l500mm deplh, in l\,4eler

3 any type ot soil for laying of cable of size up to 240 mm2 (For additional cable

rm additionalwidth shall be considered i.e- halflrench leng th is to be considered

9925000004 -abour charge for laying of 11kV / 22 kV XLPE Cable of size up to 240 mm2 & Meter

lreparatron of sand layer 100mm thick, in the cable trench & covering the cable

,vith 150 mm dia (Outer), thickness 25 mm, 1.0 meter long RCC half round muffs

4 tnd providing and lixing of4inch width yellow colour polyethylene tape with

rrinting"CAuTlON ELECTRIC CABLE BELOW at 0.75 m depth rrom ground

rurface aller laying cable in trench. This will provide indacataon that electric cable is

lassing underground so as to protect cable from mechanical injuries, refilling the

iame. as oer lnstruction ot E oineer in Charoe {ElC) .

3925000005 -abour charge tor horizontal drilling using Auger machine without damage io Meter

iurface road at max 2.0 mtrs depth & putting of 6-'l 'l kg/cm2 , class-4,Green color,

11omm 0.D. 8.smm thickness H.D.P.E. pipe confirms to lS 4984-1987(3rd

'evision) and BIS certilication and laying of'l1KV/22KV XLPE cable of size up to

5 240 mm2 in HDPE pipe, as per Site Condition (excluding cost ol pipe). The detait

Tlap obtained from HDD machine and excelsheet hard and soft copy) indicating

he respective depth and distance from adjacent landmark for each segment for

IDD is must require to be submined, HDD to be canied out at depth 1.5 mtrs to

2.0 mtrs as Der sile conditions and as er instruction of ElC.

1925000006 Labour ciarge for horizontal drilllng manually without damage to surface road at Meter

max 2.0 mtrs depth & putting of 6.11 kg/cm2 , class{,Green color, 11omm O.D.

8.smm lhickoess H.D.P.E. pipe confirms to lS 4984-,l987(3.d revision) and BIS

cenification and laying ot 11KV|22KV XLPE cable of size up to 240 mm2 size, as

6 per Site Condition (excluding cost of pipe). The detail map and excel sheet (hard

and sofl copy) indicating the respective depth and distance from adjacenl

andmark foreach segment of cable to be submitted. Drilling to be canied out at

Cepth Minimum '1.2 mtrs to 2.0 mtrs as per site conditions as per inslruction ol

9925000007 Supply oI6.11kg/cm2 , class-4,Green colo., 110mm O.D. , 8.5 mm thickness Meler

7 H.D.P.E. pipe confrms to lS 4984 and BIS cedification tor laying ofunderground

11KV/ 22KV XLPE cable up lo 240 mm 2 size.

9925000008 Labour work for RCC concreling on digputed localion and repairing ofdamage CMT

portion o, road crossing for lhe work canied oul for roads gossing as t rell as

toncreting & muffing of poles including all materials

9925000009 Providing & fixing concrete stone route marier of 300 mm width x 150 mm thack x No

550 mm height embedded in earth at leasl 300 mm below & 350 mm above

ground level rcspectively at distance approx. 50 meters along the length ofcable-

Ihe RCC concreting (1:2:4)(all necessary materials will b€ in bidde/s scope) ot

route marker is to be canied out 300 mm width x 150 mm hick x 300 mm below

Jround level as per instruction ot ElC. The route marker should be wilh name of

gompany wilh approved yellow colour-DGVCL. The distance from marker to cable

and cable deplh with feeder name elc., marked with anow sign is to be painted on

t. The route marker is to be fixed at location near to any fxed permanent location

(not necessary to fix exact on top ofcable) as per imtruclion of ElC.

3925000010 Erection of D.P. (double pole) structure using 9 / 'l'l Mtr. RSJ pole with cable No

arrang€ment along with ftting of necessary tabrication tor 11KV cable

ncluding excavalion of pit & refilling otearth as p€r inslruction of ElC. (E-xctusive

rf concreling & muffng of poles)

19250000't l of Single pole structure using I / 'l'l Mtr RSJ pole with cable connection No

,rangement along with fitting of necessary fabrication for 1'l KV/22 KV cable

ncluding excavation of pit & re,illing ofearth as p€r instruction of ElC. (Exclusive

)f concreting & muffing of poles

19250000't 2 :rection of D.P. (double pole) struclure using 8.0 Mtr. PSC pole with cabte No

:onn€ction anangement along with fitling of neces8ary labrication for 11KV cable

ncluding excavation of pil & refilling ot earth as p€r instruction of ElC. (Exclusive

)f concreting & mufling ol poles

3325000013 of Single pole struclure using 6.0 Mtr PSC pole with cable connection No.

,rrangement along with fitting of necessary fabricrtion for 1 1KV/22 KV cable

ncluding excavation ofpit & refilling of earth as per instruction ot ElC. (Exclusive

)f concretino& muffina oI poles

3S25000014 -abour charge for erecting ot 11kV / 22 kV XLPE cable of size up lo 240 mm 2 on Meter

14 )P Struclure with fixing of02 Nos polymer cleats on top and middle part. Polymer

]leats, nut bolts etc. fixinq materialto be provided by contractor.

)925OOO015 fiu-ung@ pipe o.D.8.5mm perJob

thicknes; H.D.P:E. co-nfirms to lS 4984 and BIS ceriification on the erected

DP structure for the mechanical proteclion of cable by inserling the cable inside

't5 HDPE pipe. The HDPE pipe shall be erected in such a way that 300mm shall be

below lhe ground level and the rest 2700 mm shall be supported on the OP

Structure with 01 No Polymer cleat. All materials including polymer cleat and Nul

boll lo be orovided bv contra.tor

9925000016 )roviding and fixing ol pipe typ€ earthing ,rom 80 mm dia class-B Gl pipe with pit No

io be flled with sah & coke and conslruction of chamber as per DGVCL Drg. No.

't6 lg /i00 fo. OP and cable. The earthing pit should be ioined wilh cable by c.l. strip

lf size l" width & 2 mm lhick. All material Gl pipe, Coke Salt etc willbe supplied

9925000017 Suppty & frxing of heat shrink type end terminations (ouldoor) for up to '1'1kV 3C x No

17 185 mm2 size XLPE cable as per DGVCL technicals ecilication

,925000018 Supply & tixing ot heat & shrinkable end terminalions (outdoor) for up lo 22 kV 3C No

18 x 185 mm 2 size XLPE cable ( as per OGVCL technical specification)

)9250000'19 Supply & fixing of heal shrinkable type end terminations (indoor) for up to 1 1kV No

19 3C x 185 mm 2 size XLPE cable as per OGVCL technical specifcation

,925000020 Supply & fixing of heat & shrinkable end terminations (indoor) for up lo 22 kV 3C x No

20 185 mm 2 size XLPE cable as p€r DGVCL technical specifcation

9925000021 Supply & frxing of heat shrinkable straight through irinl for up to 11kV 3C x 165 NO 677

21 nm 2 size XLPE cables as per DGVCL technical specification.

9925000022 Supply & 6xing of heat shrinkable skaight through ioint type Ior up to 22kV 3C x NO

185 mm 2 size XLPE cable a9 pe. DGVCL technical specification

9925000023 -abour charge tor excavation of 2100mm long x l200mm wide x '1200 mm deep No

oint pits for installation of 'l lkv / 22kV Skaighl lhmugh ioints as per instruction of

?ngineer-in-charge & covering the cable with 150 mm dia (Outer), thickness

nm, 1.0 meter long RCC halfround muffs & refilling same as per instruction of

9925000024 Providing and fixing of insulaling bus bar, made from 11KV/22KV XLPE cabte afier No

removal of semi conducting layer and applying of PVC heat shrinkable antitracking

core insulating tubing (1.1KV). on both end lerminal using Aluminium long banel

heavy duty up to 240 sq mm lugs, Aluminium bus connector. Taping with pcdamp

lor bus conductor as per drawing and as per insiruc{ion of ElC. The Aluminium

ugs and PG clamp shall be covered with 'l1KV/22KV HT insulating

lapes.(11KV/22KV XLPE cable will be in scope of DGVCL white a other materiats

,ill be in biddels scope.

)925000025 Iesling of cable at various poinls and commissioning the teede. as per inslruction No

25 )f engineer-in-charge.Test resull shall be submitted by contracto. with bill.

9925000026 rrepa.ation and submission of 6 (six) copies, ol complete layoul drawings with Set

26 3lS mapping as per actual cable routing showing road crossing, HDPE pipe

,eeving, jointing locations, markers etc.

,925000027 Providing and fixing ofsign Board 9t junction point Made oul of2 mm aluminium NO

sheet size 750x300 mm (2.5 x 1 t) rectangle, as pe. d$ign, pretreated with

phosphate process and acid etching coated with one coat ot epoxy primer and two

:oats of best quality tEinlg, refleclo.ized with Hi lntensity lel.o rellective

eheeting as per the latest and ,rame fabricated hom guitable size iron angle. The

Sign Board is to be fixed on the base prepared from channel and bracing angles

,vhich is grouted by means of cement concreting of 1:2:4 for size of 300 mm dia x

300 mm height (500 mm lo be grouted in ground). The details to be disptayed on

sign board will be given by lnchargeEngineer. (a) Hi i.lensity Micro prismatic

9925000028 Providing and fixing ofsign Board (Oanger Board) on Distribution Transformer No

Senters Made out of2mm aluminium sheel size 300x300mm (1X1 fr) as per

lesign, pre treated with phosphate process and acid etching coated with one coat

28 )Iepory primer and lwo coats ot best quality paints, refectorized with Hi-tntensity

rtroreflective sheeting as per the latest and frame fabricated from suitable size

ron angle. The Sign Board (Danger Board is to be fixed at the location as per

nstruction of ln-cha.ge Engineer. (a) Hi inlensity Micro prismatic Grade

1s25000029 Providing & lixing of aluminium tag ot size 250 mm (L) x 75 mm (W from 3 mm No

aluminium sheet along with 1.0 mm dia aluminium binding wire forfixing of

29 aluminium lag near end termination joint at DP structure for identirying the cable.

The details of feeder i.e. 1l / 22 KV with feede. name should be punched on lhe

lag by letter punch ot size 16 mm as per imtruclion of ln.ciarge Engineer.

9925000030 Supply & fixing of heat shrink type end te.minations (outdoor) for 11kV 3C x 240 Nos

30 11m2 size XLPE cabie as per OGVCL technical specillc€tion.

9925000031 Supply & lixing o, heat & shrinkable end termihations (outdoor) for 22 kV 3C x 240 Nos

nm2 size XLPE cable as per DGVCL technical specification

9925000032 Supply & fxing of heat shrink type end terminations (indoory for 11kv-e x 2+O Nos

nm2 size XLPE cable as per DGVCL technical specification

9925000033 Supply & fixing of heat & shrinkable 6nd terminations lindoorl for 22 k\r 3C x 2cO Nos

nm2 size XLPE cable as per DGVCL technical specification

1925000034 Supply & lixing oI heat shinkable etraighi through joint for 1t kV 3C x 240 mm2 Nos

34 size XLPE cabl€s as per DGVCL technical s ecification.

9925000035 Supply & fixing of heat shrinkable straight throughjoint iype for 22kV 3C x 240 Nos 11s90

35 Tm2 size XLPE cable as per OGVCL technical s ecifcation

nlno o, rl Av,oJu A SuAoA comDslible, RRL Nos

36 rype3 Way RMU inctuding Two numbe-rs of earttrtngs as per Dia;no

n Dooers scope) and as per DGVCL Technrcal sp€cillcation.

9925000039 Instalarion. Tesring and commrssioning of t ixVseo7 SEI6I Coffi6G--

RRLL type4 Way RMU including Two numbers of earlhinqs as oer Drawrno

:material is in bdde/s scope)and as per DGVCL Technr;t specifcation "

1925000040 lnstaflation, Testing and commEsioning of 22KV,630 ASCADA ComdIEElFFL- Nos

38 type-3 W€y, RMU including Two numbec of ea.thing8 as per Drawing (material is

n bidde/s scope) and as per DGVCL Technical speaification.

9925000041 nstallation, T_esring and commissioning ot 22KV63,gl g6[9ftffis1ipb-FF[L Nos

39 rype.{ Way. RMU including Two numberE ofearthinqs as Der O.awino (msteriat is

n biddeis scope) and as per DGVCL Technical specincation.

3925000042 :onstruction of plinth for t t XV, RnL type- S Wayl ie-wo nu 6EE? tsoEGi}- Nos

40 )n€ number ot Breaker) Ring Main Unit as per DGVCL.s lechnical specification

nentioned in drawing no: Org. 'l1kv{l, All required materialwill be aupplied by

9925000043 Construction of plinlh for t txv, nnlL typel W-ylG rwo numoEE oiG6 Nos

41 fwo number of Breaker)Ring Main Unit as per OGVCL's lechnical specificalion

menlioned in drawing no:Org. l lkv{2.All required materiatMll be supplied by

9925000044 lonstruclion of plinth for 221W. RRL type- 3 Way 1i.e Two numbeE ot tsoEtoiE- Nos

42 Jne number of Breake4 Ring Main Unit as p€r OGVCL,S technical specifi€tion

rentioned in drawing no: Drg. 22kv-01. All required matoriatwi be supplied by

1925000045 lonstrudion of plinlh for ZZXV, nell typel@ Nos

43 fwo number of Breaker)Ring Main Unit as per DGVCL,g technicat specification

nentioned in drawing no:Drg. 22kv{2.All required malerialwillbe supplaed by

9925000046 Vodifcations e.g. Providing and fixing ofTerminat proteao- ii. Re-ule abte oo6i- Nos.

(HT Side 1 1/22KV, LT Side 1.1KV) inctuding ,fi/22 KV insutating taps and L.T,(l.l

KV) insulatlng taps .Busba., Tapping from Bus Bar (11/22 KV XLPE cabt€)

lhrough P.G. Clamp for H.T. Jumper to D.O. Fuse lo bushings of Transformer

Oenter, providing & Fixing ofjumper and providing & fixing oi Heat Shrinkabte Anti

44 Iracking Corelnsulaling Tubing (lnsulation Levet 11/22 KV) in H.T jumper,

:lamping anangement of cable support frarne on both side Of existing Over Head

ype Distribution Transformerto utilize in Under Ground cable netwo* as per

,rawing & as per instruclion of Ehgineer incharge. All live parts i.e. pcclamp,

:onnections of O.O.fuses, HT bushings etc . shall be covered with fixing ol

<V HT insulating tapes. ( 1'tl22 KV XLPE cabte will be in scope ol OGVCL white

9925000047 Laying ol any size of I 1I22 W XLPE tPtLgoabte in readymade trenc} or in open per cable

45 space per mk

46 9925000060 Labou. Charges tor Lying oI O/H XLPE cabte poh to pole KM

47 3925000064 Supply of 150 mm dia (inner), thickness 25 mm, .t.O meter tong RCE HilfEounl- No.

f ismantting of exastinE Dist. x,mer center lRS.rSiFFoLE; 2sl63/i6

wilh all fabrication & crediting the otd material to slore.

49 OISMENTALING OF CONDUCTORS KM 0

9926000001 HT TAPPING FROM THE EXISTING POLE INELUDING FXINGoF CROSS- NO.

ARMS, CLAMPS ANTI-CLIMBING DEVICES, DANGER BOARD, INSULATORS

50 ETC, COMPLETE AND PAINTING OF FABRICATEO MATERIALS AND

NUMBERING COMPLETE W|TH COST PAINTS AS PER STANDARD

SPECIFICATION BUT EXCLUOING ERECTION OF GUY SET ANO EARTHING,

9926000002 OF PSC POLES OF 8METER 2OO KG INCLUDING EXCAVATION NO,

)F PIT ANO REFILLING OF EARTH, FIXING OFCROSS ARMS. TOP FITTING

]LAMPS ANTICLIMBING DEVICES, INSULATORS ETC,COMPLETE AND

51 ,AINTING OF FABRICATED MATERIALS USED ON IHE POLES ANO

{UMBERING W|TH COST OF PAINT AS PER STANDARD

JPECIFICATION BUT EXCLUOING ERECTION OF GUY SET AND

9926000003 :RECTION OF STEEL POLES OF 9 To 'l I METERS INCLUDING EXCAVATTON NO.

)F PIT ANO REFILLING OF EARTH, FIXING OF CROSS ARMS, TOP FITTING

]LAMPS ANTI.CLIMBING DEVICES, DANGER BOARD. INSULATORS ETC.

]OMPLETE AND PAINTING OF STEEL POLE, FABRICATED MATERIALS

JSED ON THE POLE AND NUMBERING WTH COST OF PAINT AS PER

JTANDARD SPECIFICATION BUT EXCLUOING ERECTION OF GUY SET AND

9926000004 :RECTION OF SIEEL POLE OF 13 METERS FOR MILWAY CROSSING ON NO.

]G/MG/NG LINE FOR O.4OO/11/22KV OVERHEAD LINES I.E INCLUOING

:XCAVATION OF PIT & REFILLING OF EARTH, FIXING CROSS ARMS, TOP

:ITTING CLAMPS,ANTICLIMBING OEVICES DANGER BOARD, INSULATORS

:TC. COMPLETE AND PAINTING OF STEEL POLES, FABRICATED

UATERIALS USED ON THE POLES ANONUMEERING wlTH COSTOF PAINT

\S PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY

]ETS ANO EARTHING,

3926000005 :RECTION OF DOUBLE POLE STRUCTURE OF 8 METERS 2OO KG PSC NO.

rOLES INCLUOING EXCAVATION OF PITS & REFILLING OF EARTHING,

:IXING OF CHANNELS, SUPPORTING ANGLES,CTAMPS, ANTI-

]LIMBING DEVICES DANGERBOAROS,INSUI-ATORS ETC.COMPLETE

\ND PAINTING OF FABRICATEO MATERIALS USEO ON THE POLES ANO

{UMBERING WTH COST OF PAINT AS PER STANDARD SPECIFICATION

]UT EXCLUOING ERECTION OF GUY SETS AND EARTHING. (WTHOUT AB

i[+J""1T""":iE*Als].t'"';n'r':lL'llt"',3,"'ffi JE"'#s"*

ii'n-oiib's. ir.rsuGroRs Erc coMPLErE qP4iNIl[G. . ...^-^ . ^

'o:$wlxn*lF+rrtnLiiUs{i-"r"'i".fi l*W-^"

i'nE8iioil,ii c.w sdi et'roeanrntlc rwrHour AB

[3I3?B%!';',ili'-;ffi X;"4?]i_o_Lii-^-.1JpI"F.

fitlfi fffi Eiiii'ssr'i$]is{uT[Hri:]tE:ffi NG wrH

Xeliciriid:tli,iiitiiggE6:olilH'!"?li:,llP,IH"ERI

#'iliN;;5;iR-sieuoeno AND EARTHING' (wrH AB .9

iriri6bi iieciror'r-oi GUY sEr

': 1".:";' il;Xt;; ; ii,,rEieas sree poLES NcLUDT Nc

ii^iEN &;ii ;\nd niFrr-r-rr.rc or eaarH, FrxrNG oF cHANNEL

;;Airia ;ilelts Cr-nuis, AlrtcrtuatHg DE.y'cJS^ :%llgE^R

'il3,iX?b"-"d.'.#EB,f; i.'YEifi iiFo^;rircbipor-es-

ii'd-ra-ritirli,5 useo otl rxe po-t-es-mouuMBERlNG wrH

5i parlrl n5 pen sTANoARD sPEclFlcATloN

[, i,3ii]c'eildiroubr cuv set mo EnnrHrNG (wrH AB

i-nirsionr,tins, TtGHTENING ARREsroRs,

oi iii s MiiEns zoo KG PSc PoLEs rN.cLU^DING

ir";n"N #;ndiNd niFir-irr'ro or ernrH, -

iiloh"r,iEis inou sroies ro stre ptxtnc oF cHANNE-LS

'ilft'iriiG:HA;iirt-sdncis-snnuscut'tPsANrrcLrMBrNG

rjr-NdEn e-oARoscoNDUcroR AND cABL-E-wll19.--^ ..

,i#i*"iAn-#iiffi ii6iir-rrahrcnreoMArERIALSUSEooN ^.,

ii.:dir'tiildiRir.iG wificbsr or

pnrr,es P.ER STANDARD

ir1i"r.i'bu-i iiiitioitro eaecrtol or cuv sErs

iG;;f i\naFoRMEns. rtcureutuc enRESroRs'

jN-aoigro rr METERS srEEL

-'iii,oi oi i;iisl neriutruc orio-Lls-.. ^.^-.. oF

;'iiior,,t sione ro strE. FlxlNGoF cHANNEL-q^. ..,^..

'sr^rothl'-m"Sronf:'"xlgtol''1In{i!:'-r"fl ::

i[tiil*E,*"$iu5^:ir*e'+nq+rclrm:";W:

ffi ['e'J#'tft i"J,i*t",tl3$[itilil.",fl iro?'JAJ.*,

i'ibiiErc. eui excLUDlNG coNcRErlNG'

Xitiiil;")AXb'ti,iitlEic.rspinsmNoARDsPEcrFrcAloN'

iiuYlvliHbiii ciisr oi otwne es pen srnuonno

oF Gl PIPE/Cl PLATE TYPE EARTnTNG TNULUUTN'uve

Ei'cl iliwrrioui

cosr or PIPEiGTPLATE Gr wrRE As

3i.qNblnosiectrtcATloN (20k soll+2ok coal)

OF STREET LIGI,I I I-IA I UXE UUMTLE I E

-iieiJ- Hoioen rEcK wooDBUsH,REi.L-E-q-r^9TP

ivrnrN"iEt] as i;Eilielroenri specrptcArloN BUr ExcLUDING

iiiiiv"i Liiri.r'islncruor-r'rG itxit'tc oF lNsulAroRs BlNorNG

i;i#i6iliiitMtNri poie rorrrerEntHG PolNr TNcLUDTNG

ijEr.,leren wrri uerER EARTHINGcoMPLEr-E-ry9111i9.P^ER

er.r6nici 5pEbriicariotl aur rxcluotNG cosr oF MATERIALS'

iriii"r,ni io-ui coie carilelabr.,r rEnutHAL PoLE ro METERING,

ir.i6iUoruc ixixo oF METER wrH MErER EARTHING- cor\4PlErE

ib-iEn sraNomo sPEctFlcATloN gur ExcLUDING cosr oF

rEdiioi:r'oi Foi-er-oui erc. rc pen STINDARD sPEclFrcArlox ovE-R

ri-oviNonraAicosrcovEREoAGAINSrElclvtlo^ry-olfll.!|.-D-EI

3Sii iiiiiaEcintr oF PoLE,GUY, oousLE PoLE srRUcruRE

W|TH THE APPROVAL OF SUPOT,ENGINEER'

)926000021 PROVIDING GUARDING TO Hr LINE ON ROAD/ RA-if'RO-SSi

71 PROVIDING GUARDING OF LT LINESffi MTR

72 ,92ti000023 -T LrNE TApplNG- stNG LEFHASE-. NO.

73 9926000024 LT LINE TAPPING- THREE PHASE NO.

9926000025 LAYING OF OVER HEAD LTCABLE@ NO,

CROSSING AND TELEPHONE LINE CROSSING ETC.(PER SPAN)

ERECTION OF SINGLE POLE STRUCTURESWTH. HG NO,

FUSES,TRANSFORMERS.LIGHTENING ARRESTOii, OISTRIBUTION BOX. ON

8 METERS 2OO KG PSC POLE INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM STORES TO

SITE, FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS

ARMS CLAMPS, ANTICLIMBING DEVICES OANGER BOARDS,CONDUCTOR

AND CABLE WRING ETC,COMPLETE ANO PAINTING OF FABRICATED

MATERIALS USED ON THE POLE AND NUMBERING W|TH COST OF PAINT

AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SETS ANO EARTHING.

9926000027 ERECTION oF SINGLE PoLE STRUCTURES WliH HG- NO.

FUSES,TRANSFORMERS,LIGHTENING ARRESTOR. DISTRIBUTION BOX, ON

I to 11 METERS RSJ POLE |NCLUD|NG EXCAVATTON OF ptTS AND

REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM STORES TO

SITE, FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS

76 ARMS CLAMPS, ANTICLIMBING DEVICES OANGER BOARDS.CONOUCTOR

{ND CABLE WRING ETC,COMPLETE ANO PAINTING OF FABRICATED

\4ATERIALS USED ON THE POLE AND NUMBERING WTH COST OF PAINT

AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OFGUY

SETS AND EARTHING.

9926000028 ERECTION OF PSC POLES OF IO METER 270 KG INCLUDING EXCAVATION NO,

OF PIT AND REFILLING OF EARTH. FIXING OF CROSS ARMS. TOP FIITING

77 CLAMPS ANTICLIMBING DEVICES, INSULATORS ETC. COMPLETE ANO

PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

9926000029 ERECTION OF DOUBLE POLE STRUCTURE OF 1O METER 270 KG PSC NO.

POLES INCLUDING EXCAVATION OF PITS & REFILLING OF EARTHING,

:IXING OF CHANNELS, SUPPORTING ANGLES,CLAMPS, ANTI-CLIMBING

]EVICES DANGERBOAROS,INSULATORSETC.COMPLETEAND

,AINTING OF FABRICATED MATERIALS USED ON THE POLES AND

\IUMBERING wlTH COST OF PAINT AS PER STANOARDSPECIFICATION BUT

=XCLUDING ERECTION OF GUY SETS ANDEARTHING. WTHOUT AB

,926000030 STRINGING OF IOOMM2 ACSR/IOOMM2 AAAC CONDUCTOR FOR HT/ LT ONE

-INES INCLUDING FIXING OF INSULATORS, BINDING JUMPERING ETC, COND

1926000031 STRINGING OF DOG CONDUCTOR FOR 11/22KV HT LINES INCLUDING ONE

FIXING OF INSULATORS. BINDING JUMPERING ETC, COND

9926000032 ERECTION OF DOUBLE POLE STRUCTURES WTH MOUNTING OF AB NO.

SWTCH,HG FUSES, TRANSFORMERS. LIGHTENING ARRESTORS.

DISTRIBUTION BOX, OF 1O METERS 270 KG PSC POLES INCLUOING

EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROM STORES TO SITE, FIXING OF CHANNELS,

SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTI-CLIMBING

DEVICES,DANGER BOARDS, CONDUCTOR AND CABLE WRING

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WTH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

9926000033 DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING OF FABRICATION No.

82 AT STORE &STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

9926000034 DISMENTALLING OF 1O MTR PSC POLE WTH CREDITING OF FABRICATION No.

83 AT STORE & STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING

rO DEPARTMENTAL STORE

9926000035 DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE) 0/VITH No.

TRANSFORMER) WTH CREDITING OF FABRICATION & TRANSFORMER AT

84 STORE & STACKING OF POLE SAFELY ON ROADSIDE OR CREDJTING TO

DEPARTMENTAL STORE

1926000036 )ISMENTALLING OF TRANSFORMER CENTRE (E MTR PSC POLE) No.

85 IWTHOUT TRANSFORMER) W|TH CREDITING OF FABRICATION AT STORE

T STACKING OFPOLE SAFELY ON ROAD SIDE ORCREDITING TO

)EPARTMENTAL STORE

1926000037 STRINGING OF LI ABC OF 1'35 SQ MM + 1'25 SQ MM INCLUDING FIITING KM

]F ALL ACESSORIES I.E, SPECIAL DESIGN SUSPENSION / TENSION

]LAI\,|P, FIXING OF CROSS ARM, LT SHACKLE INSULATOR ETC, FOR FIXING

86 ]F MESSENGER WRE AND TO PROVIDE SERVICE CONNECTION ON

A.ERIAL BUNCH CABLE BY INSULATED PIERCE-ING CONNECTORS

THROUGH BOX COMPLETE AS REQUIRED &

.]IRECTED SERVICE CONNECTION

BY ENGINEER IN CHARGE,

3926000038 @5soMM+1'3ssQMM KM

NCLUDING FITTING OF ALL ACESSARIES I.E, SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, LT SHACKLE

87 NSULATOR ETC, FOR FIXING OF MESSENGER VvlRE ANO TO PROVIDE

SERMCE CONNECTION ON AERIAL BUNCH CABLE BY INSULATEO PIERCE.

NG CONNECTORS THROUGH SERVICE CONNECTION BOX COMPLETE AS

REQUIREO & DIRECTEO BY ENGINEER IN CHARGE,

)926000039 @ sQMM tNCLUDING FlrrlNG KM

CF ALL ACESSARIES I,E. SPECIAL OESIGNSUSPENSION / TENSION CLAMP,

88 EIXING OF CROSS ARM, BINOING TO PIN INSULATOR,PREPARING

SHACKLEPOINT,JUMPERS ETC- AS REQUIRED &DIRECTED BY ENGINEER

1926000040 STRI.IGING o ABC OF 3r0 SO MM +95 SO MM INCLUOING FITTING KM

]F ALL ACESSARIES I,E. SPECIAL DESIGNSUSPENSION / TENSION CLAMP,

89 :IXING OFCROSS ARM, BINDING TO PIN INSULATOR,PREPARING

SHACKLEPOINT,JUMPERS E'IC, AS REQUIRED AND OIRECTED BY

FNGINFFR IN CHARGE

1926000041 STRIT'C,II.'G OF LT ABC OF 2'50 SQ MM +125 SO MM+ 35 SO MM KM

NCLUDING FITTING OF ALL ACESSORIES I,E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, LT SHACKLE

90 INSULATOR ETC, FOR FIXING OF MESSENGER vvlRE AND TO PROVIDE

SERVICE CONNECTION ON AERIAL BUNCH CABLE BY INSULATED PIERCE-

ING CONNECTORS THROUGH SERVICE CONNECTION BOX COMPLETE AS

EF.II IIFlFD t' DIFIFCTFD BY FNGINEER IN CHARGE

)926000042 iEMEMAiiNdoF RSJ (gfi r METER) PoLE AND cREDtrlNG THE oLD Nos

91 IIATERIAL TO STORE

9926000043 llst,tEl.lTALlNGrIRAiISFORMER CENTER ON lO MTR.270KG PSC POLE Nos

A{THOUT TRANSFORMER WTH CREDITING OF FASRICATION AT STORE

qND STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING TO

nFD^9iilENtat qlnF)F

9926000M4 DISMENTALING OFTRANSFORMERCENTERONIOMTR,2TOKG Nos

PSC POLE(IMTH TRANSFORMER) WTH CREDITITIG OF FABRICATION AT

STORE AND STACKINGOF POLE SAFELY ON ROAD SIDE ORCREOITING TO

NEPAPII,FNTAI ST.)PF

9926000045 fIS&lENTLING OF IlKVABC OF 3.95 SQ MM +80 SO MM AND CREDITING KIV 205't

94 FITTINGOF ALL ACESSARIES AND FABRICATION TO DEPARTMENTAL

1s26000046 ]ISMENTLING OF 22 KV ABC OF 3?O SQ MM +95 SQ MM AND CREDITING Kt\.4

95 :ITTINGOF ALL ACESSARIES AND FABRICATION TO DEPARTMENTAL

9926000047 ]ISMENTALING OF LT ABC OF 1*35 SO MM + 1.25 SO MM AND CREDITING KM

96 :ITTING OF ALL ACESSARIES TO OEPARTMENTAL STORE.

9926000048 )ISMENTALING OF LT ABC OF 3'50 SQ Mt.I +1'25 SQ MM+1'35 SQ MM AND KM

97 FITTING OF ALL ACESSARIES TO DEPARTMENTAL STORE,

9926000049 'REDITING

IISMENTALING OF LT ABC OF 2'50 SQ MM +1?5 SO MM+ 1'35 SO MM AND KM

98 :REDITING FITTING OF ALL ACESSARIES TO DEPARTMENTAL STORE,

9926000050 iESTRINGING OF ALL TYPE OF CONOUCTOR (EXCEPT DOG CONDUCTOR) ONE 't3?7

:OR 11/22KV & LT LINES INCLUDING FIXING OF INSULATORS. BINOING coNo

99 ,,UMPERING ETC. PER KM

9926000051 RESTRINGING OF DOG CONDUCTOR FOR 11/22KV HT LINES INCLUDING , ONE

BINDING JUMPERING ETC. COND

9926000052 -ASOUR CHARGE FOR THE INSTALLATION OF NEW DTR METER, (METER NO.

101 A,'ILL BE PROVIDED BY DGVCL

3926000053 .ABOUR CHARGE FOR IHE REPLACEMENT OF DTR METER AND OLD NO.

102 \,IETER SHOULD BE CREOITED TO SDN STORE. (METERWLL BE PROVIDED

9S26000054 .ABOUR CHARGE FOR PROVIDING CT COIL FOR OTR METER CONNECTION, (CT PER

:OIL WLL BE PROMOED BY DGVCL) CT

9926000055 TABOUR CHARGE FOR REPLACEMENT OF CT COIL FOR OTR METER PER

10,{ 3ONNECTION AND OLD CT SHOULD BE CREDITEO TO SDN STORE. (CT CT

SOIL WLL BE PROVIDED BY DGVCL

9926000056 .ABOUR CHARGE FOR FIXING OF MMB FORDTR METER (MMB WLL BE NO.

105 ,ROVIDED BY DGVCL

3926000057 IBOUR CHARGE FOR REPLACEMENT OF DTR METER NO 1B2A

106 3OX, (METER WLL BEPROVIDED BY DGVCL

9926000058 ,ROVIDING / REPLACEMENT OF 1.5 SO MM 1O CORE COPPER CABLE 3,5 NO,

107 UETER (CABLETO BE PROVIDED SY AGENCY

3926000059 LABOUR CHARGE FORPROVIOING/RECONNECTION OF PER

108 TERMINALCONNECTION wlTH PROPER SIZE OF LUGS. LUGS COST IS TERMIN

BORNE BY AGENCY ATION

9926000060 TABOUR CHARGE FOR THE SPOT READINGOF DTR METER W|TH OETAIL PER

SURVEY OF DEFECT IF ANY, A DULY SIGN COPY BY SURVEYOR PERSON DTR

109 3F AGENCY IN PROFORMA REPORT SHOULD BE SUBMITTEOTO SDN

)NLY IF ALLPARAMETER OF VOLTAGE, CURRENT & LOAD AS SHOIAN Ii,I

)ER.FORMA IS FILLED) AS PER THE INSTRUCTION OF ENGINEER IN-

3926000061 -ABOUR CHARGE FOR THE SPOT REAOINGOF DTR METER WTH DETAIL PER

SURVEY OF DEFECT IF ANY, A DULY SIGN COPY BY SURVEYOR PERSON OTR

110 )F AGENCY IN PROFORMA REPORT SHOULO BE SUEMITTED TO SDN

f,FFICE. (OULY FILL PER-FORMA IN FAULT CONOITION IN WHICH

TEADINGPARAMETER IS NOT SHOWN IN METER

EiiF,isdi:il,F#l;;rEEtrIff I$Jf.ffi F

il2 & C1lL ETc WTH1UT 10 coRE coppeacaatet luiria..uEreri

CT/PT COILWLL BE PROVIDED BY DGVCL

)926000064 E of messanger Conductorat with a distance not more than 0.75 mtr with I No

minimum on XLPE Cable with single strand binding wire (including cost of

)926000086 PER SET 't

otector (UV Resistance) with using 95/120/150 sq.mm long banel alurninum lug.

Set = 3 Nos i.e. on R, Y, B)

)926000087 HT EPR Tap on 11/22 kV Distribution T PER SET

of bare conduclor by HT ABC conductor (DO botlom side to

afrer removal of semi conductor by HT ABC (6 inch both side). HT

)926000088 y, lnstallation, Testing and Commissioning of Maintenance Free, Ready NO

ule, Pipe-ln-Cage (Pic) Type, Eadh Electrodes for HT Feeder Pole Having

mm Electrode Length as per the Tender Specifications and Drawing. (All

)9260000E9 , lnstallation, Testing and Commissioning ofMaintenance Free, Ready NO

e, Pipe-ln-Cage (Pic) Type, Eadh Electrodes for HT Feeder Pole Having

mm Electrode Length as p€r the Tender Specifications And Drawing. (All

)926000090 and lnstallation of 25 X 3 mm Gl Strip having hot dip- galvanized-zinc [ilETER

of 80-r00 microns without any joints or welding. Both the end of the Gl

should be connecled with Gl nut bolls and required fabrication woft lor giving

118 rate earlhing connections to(1) Neutral ofthe lransformer(2) MS structures of

transformer center (Approximately 25 meter Gl strip per uansformer centre- as

requirement and instruction of Enganeer in- charge) (AIl Materials will be

119 tq?60nooq2 / and lnstallation ol UPVC slandard make Pipe of 1.25" diameler for METER

120 )926000093 iuppty & fixing of upto 33 kV Conductor sleeve for Busbar to Drop oul Fuse and Per TC

)926000100 iupply & fixins of upto 33 kV Conduclor sleeve for gusbar to Drop out Fuse and Per TC

122 )926000094 sleeve for Busbar to Drop out Per TC

123 tg26ooorol & fixing of upto 33 kV Conductor sleeve tor Busbar to Drop out Fuse and Per TC

't24 )926000095 & fixing of Oisc type Red Color FRP(Non-flammable) malerial with NO

)926000096 )roviding and fixing of LT Terminal protectors i.e. Re-lseable boot (LT Side 1.'l NO

126 lylon Net around Transformer Cenier

)926000097 'lylon Net (12'a5 ff) 9ER NEI E50

DAooo6SB \lylon Dori PER TC

)926000099 -abour charge for fitting Nylon Net (Allfabricated material for fitting nylon nei shall PER TC

129 ,e provided by DGVCL)

sary electricity connection for fabrictated items shall be provided by

on payment of required charge for connection & electricity bill of the

, shall be paid by the agency.

the rates are inclusive ot PF and Exclusive ol GST applicable lime io time.

i.All steel material are to be painied as belowi

a) Scrubbing oI rusted surface properly before applying the paints on to the RSJ

)oles & steelfabricated materials of RSJ/PSC poles is must required-

Two coats of approved lsl mark red oxide (primer) is to be properly painted for

RSJ poles & steel fabricated materials of RSJ/PSC

TOTAL AMOUIIT = FORTY SEVEN LAC ONLY TOIAT=

o.pftvo#in"", toarul

DGVCL,Kadodara lnd Sdn