Kerala

Active

Works

Civil Works - Buildings

SDP Pamba M and M festival 1202 ME Repairs and maintenance to the Annadanamandapam building , Ladies toilet block and L toilet at Pamba

Travancore Devaswom Board

Pampa | Pathanamthitta, Kerala

Amount: ₹14.2 LCloses: 28 Sept 2026Due tomorrow

Timeline

Published19 Sept 2026
Closes28 Sept 2026
Bid Opening29 Sept 2026

Tender Value

₹14.2 L

EMD Value

₹35,600

Closing Date

28 Sept 2026, 11:00 amDue tomorrow

Tender Inviting Organisation

Name

Executive Engineer, Sabarimala Development Project

Address

office of the Executive Engineer, SDP

Work Description

SDP Pamba M and M festival 1202 ME Repairs and maintenance to the Annadanamandapam building , Ladies toilet block and L toilet at Pamba

Tender Information

Tender ID

2026_TDB_871353_1

Reference Number

SDP/03/ET-044/26-27

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Period of Work

45 days

Location

Pampa

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical/Finance

RequiredDuly filled and signed copy of Form of Tender as per Item No.1, Part VI of bid document (.pdf)

RequiredDuly filled and signed copy of preliminary agreement as per Item No.2, Part VI (.pdf)

RequiredDuly filled and signed copy of integrity pact certificate as per item no-3 Part VI (.pdf)

RequiredAffidavit duly filled and signed as per item no 4 Part V (.pdf)

RequiredDuly filled and signed copy of requisition for e payment as per Item No.6, Part VI of bid document (.pdf)

RequiredSelf attested copy of the bidders valid registration certificate, PAN card and GST Reg. Certificate (.pdf)

RequiredQuoted BOQ (Tender Schedule) (.xls)

RequiredDownloaded SBD with NIT (.pdf)

Fee & Financial Details

Tender Fee Amount

₹2,950

EMD Fee Amount

₹35,600

Important Dates

Last Activity

19 Sept 2026

Published

19 Sept 2026

Bid Opening

29 Sept 2026

Download Starts

19 Sept 2026

Download Ends

28 Sept 2026

Submission Starts

19 Sept 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (36 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Appendix-A-Repair and Maintenance of Annadhanamandapam building
1.001	13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work	400	sqm	-	-
1.002	13.111.2:Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm).	3,300	sqm	-	-
1.003	OD349630/2025-2026:Engaging Fitter Grade-2	3	each	-	-
1.004	13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work	110	sqm	-	-
1.005	11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.	20	sqm	-	-
1.006	21.13:Providing and fixing Brass100 mm mortice latch and lock with 6 levers without pair of handles ( best make of approved quality ) for aluminum doors including necessary cutting and making good etc. complete	2	each	-	-
1.007	21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)	44.1	kg	-	-
1.008	21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides	6.3	sqm	-	-
1.009	21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)	6.3	sqm	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.43 MB

Work Item Documents

PRELIMINARYAGREEMENT.pdf

Tender Documents • 0.19 MB

FORMOFTENDER.pdf

Tender Documents • 0.19 MB

INTEGRITYPACT.pdf

Tender Documents • 0.16 MB

Affidavit.pdf

Tender Documents • 0.19 MB

Requisitionforepayment.pdf

Tender Documents • 0.17 MB

SBD044.pdf

Tender Documents • 1.22 MB

BOQ_1476820.xls

BOQ • 0.33 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Appendix-A-Repair and Maintenance of Annadhanamandapam building
1.001	13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work	400	sqm	-	-
1.002	13.111.2:Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm).	3,300	sqm	-	-
1.003	OD349630/2025-2026:Engaging Fitter Grade-2	3	each	-	-
1.004	13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work	110	sqm	-	-
1.005	11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.	20	sqm	-	-
1.006	21.13:Providing and fixing Brass100 mm mortice latch and lock with 6 levers without pair of handles ( best make of approved quality ) for aluminum doors including necessary cutting and making good etc. complete	2	each	-	-
1.007	21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)	44.1	kg	-	-
1.008	21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides	6.3	sqm	-	-
1.009	21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)	6.3	sqm	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Appendix-A-Repair and Maintenance of Annadhanamandapam building

1.001

13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

400

sqm

1.002

13.111.2:Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm).

3,300

sqm

1.003

OD349630/2025-2026:Engaging Fitter Grade-2

each

1.004

13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

110

sqm

1.005

11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

sqm

1.006

21.13:Providing and fixing Brass100 mm mortice latch and lock with 6 levers without pair of handles ( best make of approved quality ) for aluminum doors including necessary cutting and making good etc. complete

each

1.007

21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

44.1

1.008

21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides

6.3

sqm

1.009

21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)

6.3

sqm