Providing and fixing of Play Ground equipments in NMC garden and open spaces in six division of NMC

Amount

Providing and Fixing SPIRAL SLIDE (2.1 M) Technical Specification: •Center Support pipe: Center Support pipe made from 80NB Galvanized pipe of ‘’C’’ class Heavy Duty of approved make i.e.Tata, Jindal, Appolo, Surya, Swastik or equivalent ISI mark GI pipe. •Small H-Support: It is made from 25NB GI Pipe of Class ‘C’ Heavy Duty length 600 mm with 10 mm tor rod of length 300 mm for support & strong foundation. •Deck pipe: 80NB “C” Class hot dip galvanized pipe of length 4100mm. •Ladder Frame: The slide ladder is made up of 25 NB “C” Class GI pipe & the ladder hand-railing is made up of 15 NB and 20 NB “C” class Pipes respectively. •Ladder Step: Cold formed 16 Gauge GI Plated Sheet Length 500 mm & width 90 mm EN1176-1:1998 conforming to EN1176-1:1998. The trade and riser of the ladder are designed in such a way it won’t entrap child’s foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. •Pipes: All GI pipes areTata/ Jindal/Zenith /Appolo/ Swastik or equivalent make ISI mark “C‘’ class Heavy Duty hot Dipped Galvanized GI Pipes. •FRP Spiral Slide: The spiral slide is made up of Fiber Reinforced Plastic (FRP) in one/two piece having shall thickness of 4-5 mm. •FRP Spiral Slide Platform: The spiral slide is made up of Fiber Reinforced Plastic (FRP) in one/ two piece having shall thickness of 4-5 mm. •Spiral slide railings: 20NB “C” Class Heavy Duty hot dip galvanized pipe bended to form frame with two pairs of clamps joined together to “C” class GI Pipe. The ROTO molded plastic bush & roto molded slim railing are inserted into the pipe frame in alternate pattern. The railing frame is bolted to Spiral slide platform with 20NB “C” Class GI support pipe bolted to platform at one end & clamped with special nylon clamps to railing pipe frame. • Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. SPIRAL SLIDE 2.1m Ht. Descriptions: • Product Area : 2.5 m x 1.5 mtr • Safe Play Area: 3.5 m x 2.5 mtr

Providing & Fixing ROLLER SLIDE FRP (1.5 M) Technical Specification: •Small H-Support: It is made from 25NB “C” Class Heavy Duty GI Pipe length 600mm with 10mm tor rod of length 300 mm for support & strong Foundation. •Center Support pipe: 80NB “C” Class hot dip galvanized Deck pipe. •Ladder Frame: The slide ladder is made up of 25 NB “C” Class GI pipe & the ladder hand-railing is made up of 15 NB and 20 NB “C” Class pipes respectively. •Ladder Step: Cold formed 16 Gauge GI Plated Sheet Length 500mm & width 90mm. The trade and riser of the ladder are designed in such a way it won’t entrap child’s foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. •Platform: It is 14 SWG GI Plated Platform of size - 500 x 450 x 60 mm. •Pipes: All metal pipes Tata/Jindal/Zenith/Bhushan/Appolo/ Swastik or equivalent make for “C‘’ class Heavy duty hot Dipped Galvanized ISI mark GI pipes. •FRP Roller Slide landing: It is FRP Roller Slide landing with support flanges of ISA conforming to standards IS-808-1964 & it is made up of Fiber Reinforced Plastic (FRP) •FRP Roller Slide side arm: It Is made up of Fiber Reinforced Plastic (FRP) with reinforced pins for assembling the rollers. •FRP Roller Slide top: It Is made up of Fiber Reinforced Plastic (FRP) •Pipe Materials or Class: Medium Duty ('C' Class) of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Roller: It is made from LLDPE (Linear Low Density Polyethylene) Material. The most attractive and enjoyable of its kind, the slide Chute consists of molded plastic rollers spread over the length. It is made in rotational molding. • FRP product: All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required color to the product. Thickness of the FRP material varies from 4 mm to 6 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test). •Roto product: The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV Stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 6 mm to 10 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability. •Powder coating: It shall be done of pure polyester exteriors ultra-stabilized powder Paints. Thickness maintained is a minimum of 60-70 microns. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Descriptions: • Product Area : 3.6 m x 1.0 mtr • Safe Play Area : 5.5 m x 2.0 mtr

Providing & Fixing WAVE SLIDE (Ht. 1.5 m) Technical Specification: •Small H-Support: It is made from 25NB “C” Class GI Pipe length 600 mm with 10 mm tor rod of length 300 mm for support & strong foundation. •Medium H-Support: 25NB “C” Class GI Pipe length 1490 mm with 10 mm tor rod of length 300mm for support & strong foundation. •Center support pipe: 80NB “C” Class hot dip galvanized Deck pipe of length 1980 mm. •Ladder Frame: The slide ladder is made up of 25 NB “C” Class GI pipe & the ladder hand-railing is made up of 20 NB “B” Class pipes respectively. •Ladder Step: Cold formed 16 Gauge GI Plated Sheet Length 500mm & width 90mm. The trade and riser of the ladder are designed in such a way it won’t entrap child’s foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. •Pipes: All metal pipes are Tata/Jindal/Zenith/Bhushan/Appolo/ Swastik or equivalent make for “C‘’ class Heavy duty hot Dipped Galvanized Pipes conforming to ISI mark GI Pipe. •Pipe Materials or Class: Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Platform: It is 14 SWG GI Plated Platform of size - 500x450x60mm. •FRP Wave Slide: The amazing triple wave slide is made up of FRP. The attractive FRP wave slide chute is made up of 5mm to 6mm thick fiber reinforced plastic. The FRP material is tested for abrasion resistance and UTS (ultimate utensil test). •FRP product: All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required color to the product. Thickness of the FRP material varies from 4 mm to 6 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test). •Powder coating: It shall be done of pure polyester exteriors ultra-stabilized powder Paints. Thickness maintained is a minimum of 50-70 microns. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Descriptions: • Product Area : 3.5 m x 0.5 mtr • Safe Play Area : 6.0 m x 1.5 mtr

Providing & Fixing MINI SLIDE (FRP) Technical Specification: •Small H-Support: It is made from 25NB “C” Class GI Pipe length 600mm with 10mm tor rod of length 300 mm for support & strong foundation. •Support pipe: It is 50NB “C” Class Heavy duty hot dip galvanized center support pipe of length 1350mm with two GI coated plate of 150x150x5 mm. •FRP mini slide: All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required color to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test). •Ladder Frame: The slide ladder is made up of 25 NB “C” Class GI pipes & the ladder hand-railing is made up of 20 NB “C” Class pipes respectively. •Ladder Step: It is Cold formed 16 Gauge GI Plated Sheet Length 400mm & width 80mm. The trade and riser of the ladder are designed in such a way it won’t entrap child’s foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. •Pipes: All metal pipes are Tata/Jindal/Zenith/Bhushan/Appolo/ Swastik or equivalent make for “C‘’ class Heavy duty hot Dipped Galvanized ISI mark GI Pipes. •Pipe Materials or Class: Medium Duty ('C' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Descriptions: • Product Area : 2.5 m x 0.5 mtr • Safe Play Area: 3.0 m x 1.5 mtr

Providing & Fixing SPIRAL SLIDE (3mt.) Technical Specification: •Center Support pipe: A “C” Class Heavy duty Center Support pipe made from 100NB Galvanized pipe with 10mm tor rod. •Small H-Support: It is made from 25NB GI Pipe length 600mm with 10mm tor rod of length 300 mm for support & strong Foundation. •Deck pipe: 80NB hot dip galvanized Deck pipe conforming to GI thickness. •Ladder Frame: The slide ladder is made up of 25 NB GI pipe & the ladder hand-railing is made up of 15 NB and 20 NB pipes respectively. •Ladder Step: Cold formed 18 Gauge GI Plated Sheet Length 500mm & width 90mm. The trade and riser of the ladder are designed in such a way it won’t entrap child’s foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. •Pipes: All metal pipes are approved Tata/Jindal/Zenith/Bhushan/ Apollo/ Swastik or equivalent make for “C” class Heavy duty Hot Dipped Galvanized ISI mark GI Pipes. •FRP Spiral Slide: The spiral slide is made up of Fiber Reinforced Plastic (FRP) in one piece having shell thickness of 4 to 6 mm. •FRP Spiral Slide Platform: The spiral slide is made up of Fiber Reinforced Plastic (FRP) in one piece having shell thickness of 4 to 5 mm. • Spiral slide railings: 20NB hot dip galvanized pipe bended to form frame with two pairs of clamps joined together to GI Pipe with SS 304 graded non rusting nut-bolts made from Nylon Grade-6 plastic. The ROTO molded plastic bush & roto molded slim railing are inserted into the pipe frame in alternate pattern. The railing frame is bolted to Spiral slide platform with 20NB GI support pipe bolted to platform at one end & clamped with special nylon clamps to railing pipe frame. •FRP product: All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required color to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test). •Pipe Materials or Class: All metal pipes are All metal pipes are Jindal, Appolo, Surya, Swastik or equivalent make for medium Duty ('C' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Powder coating: shall be done of pure polyester exteriors ultra-stabilized powder Paints. Thickness maintained is a minimum of 50-70 microns. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Spiral Slide – 3 mtr Ht. Descriptions: • Product Area : 3.2 m x 2.0 mtr • Safe Play Area : 4.0 m x 3.0 mtr

Providing & Fixing DOUBLE ARC SWING Technical Specification: •Arc swing frame: 6000mm long 80NB “C” Class Pipe bent in Single Piece & welded together with a flange 5mm thick & ISA of 40x40x5mm to form a strong frame. The 80NB “C” Class pipe is hot dip galvanized pipe. Height of the frame is 2700mm. •Top pipe: 50NB “C” Class Top Pipe with two Arc Swing Flanges welded at both its ends. Pipe can with standing torsion stress created due to swinging motion. These 50NB “C” Class top pipe is hot dip galvanized pipe of length 2750 mm GI pipe. •Seat assembly : 1) Swing clamp assembly: Swing clamps made up of two parts are joined together with M6 Allen bolts along with S-Hook & a specially designed Swing pin. The S-Hook is specially designed to house a bearing for smooth & noiseless swinging. The clamps are made from injection molded Nylon-6 plastic. 2) Chain: Rubber dip molded swing chain of dia. 8mm & 1450mm Long. 3) Hook: S-Hook of dia. 8mm & 145x130 Triangular hook of Grade SS 304. 4) Seat: Rubber Seat made by Natural Rubber with sufficient reinforcement or same in size in FRP. •Pipe Materials or Class: All metal pipes are Jindal/Zenith/Bhushan/Appolo/ Swastik or equivalent make for medium “C ‘’ class Heavy duty Hot Dipped Galvanized ISI mark GI Pipes. Wall thickness of pipe varies according to class / series of Pipe used. •Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. •Bearing: Clamps Bearing is self-lubricated made of SKF/ FAG/ NTN/ NACHI make shall be provided for smooth & trouble-free movement. •Clamp:- Swings clamps made up of two parts are joined together with M6 Allen bolts along with S-Hook & a specially designed, made from injection molded Nylon -6, plastic. •Pins and Circlips : 12mm diameter pins shall be made from EN8 material & Circlip A10 Or equivalent standard material. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Descriptions: • Product Area : 3.2 m x 1.5 mtr • Safe Play Area : 4.2 m X 2.5 mtr

Providing & Fixing SWING WITH BELT ASSEMBLY Technical Specification: •Swing leg pipe: 40NB “C” Class hot dip galvanized swing leg pipe of length 2950mm GI pipe. •Top pipe: 50NB “C” Class Heavy duty hot dip galvanized ISI mark GI pipes, swing top pipe of length 2700 mm welded at its both ends to junction box. Pipe can withstand torsion stress created due to swinging motion. •Junction box: 225 mm x 103 mm junction box made from 3mm thick GI Plated plate to house the two swing leg pipes & top pipe. •Seat assembly : 1) Swing clamp assembly: Swing clamps made up of two parts are joined together with M6 Allen bolts along with S-Hook & a specially designed swing pin. The S-Hook is specially designed to house a bearing for smooth & noiseless swinging. The clamps are made from injection molded Nylon-6 plastic. 2) Chain: Rubber dip molded swing chain of dia. 6mm & 1450mm Long. 3) Hook: S-Hook of dia. 8mm & 145x130 Triangular hook of Grade SS 304. 4) Seat: Rubber Seat made by Natural Non Skid Rubber with sufficient reinforcement of 2 nos. can bear the weight of 100 kg. Capacity. •Pipe Materials or Class: All metal pipes are Jindal/Zenith/Bhushan/Appolo/ Swastik or equivalent make for medium “C‘’ class series of ISI mark GI Pipes only. Wall thickness of pipe varies according to class / series of Pipe used. •Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. •Bearing: Clamps Bearing is self-lubricated made of SKF/FAG/ NTN/ NACHI make shall be provided for smooth & trouble-free movement. •Pins and Circlips: 12mm diameter pins shall be made from EN8 material & Circlip A10 Or equivalent standard material. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Descriptions: • Product Area : 2.5 m x 3.0 mtr • Safe Play Area : 3.5 m X 4.0 mtr

Providing & Fixing MERRY GO ROUND (4 SEATER) Technical Specification: •MGR frame: MGR Frame made from 40NB “C” Class pipes welded together with bottom end over a circular plate meant for assembling bearing assembly. The top end of the pipe is welded with a ISF & a plate for mounting the animal (duck) over it. The four 40NB “C” Class pipe are hold together with four 25NB “C” Class pipe to form a strong structure. The GI plated bowl is used to cover the top of the bearing assembly. •Seat frame: 20NB “C” Class GI pipe bend and joint to form a frame structure with flat plate to mount seat. The frame is bolted to the MGR frame outer end. The frame is provided with spacers for foot rest. •Bearing assembly :Bearing assembly with two bearings 1. Ball Bearing used for smooth rolling action. 2.Taper Roller Bearing take vertical thrust due to rolling moment & applied weight. The whole structure is mounted on heavy-duty bearing shaft permanently lubricated with water sealant. ( Bearings are used SKF / FAG ) Or equivalent standard company. •Center support: 80NB “C” Class hot dip galvanized center support pipe of length 500mm. This pipe is welded with a 150x150mm base plate at bottom for fixing the foundation angles ISA & Circular plate on top with OD 200mm for assembling the bearing. •Seat: MGR seat is made up of Fiber reinforced plastic (FRP). The attractive seat is made up of 3-5 mm thick fiber reinforced plastic. Seat designed to accommodate one child per seat with backrest. The seat is bolted to the assembly with special structure. The FRP material is tested for abrasion resistance& UTS (ultimate tensile test). •FRP Product: All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required color to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test). •Pipes: All metal pipes are Jindal/Zenith/Bhushan/Appolo/ Swastik or equivalent make for medium “ C‘’ class Heavy duty Hot dipped galvanized ISI mark GI Pipes. •Pipe Materials or Class: Medium Duty ('C' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Powder coating: it shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt &Nuts. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Descriptions: • Product Area : 2.1 m Dia • Safe Play Area : 3.1 m Dia

Providing & Fixing MERRY GO ROUND (Animal) Technical Specification: •MGR frame : MGR Frame made from 40NB pipes welded together with bottom end over a circular plate meant for assembling bearing assembly. The top end of the pipe is welded with a ISF & a plate for mounting the animal (duck) over it. The four 40NB pipe are hold together with four 25NB pipe to form a strong structure. The GI plated bowl is used to cover the top of the bearing assembly. •Bearing assembly :Bearing assembly with two bearings 1. Ball Bearing used for smooth rolling action. 2.Taper Roller Bearing take vertical thrust due to rolling moment & applied weight. The whole structure is mounted on heavy-duty bearing shaft permanently lubricated with water sealant. •Center support : 80NB hot dip galvanized center support pipe of length 500mm welded with a 150x150mm base plate at bottom for fixing the foundation angles ISA & Circular plate on top with OD 200mm for assembling the bearing. •Foot rest : Foot rest made from 15NB Galvanized pipe with end caps welded to two plates forming a foot rest. •Duck :Duck is made out of molded plastic in rotational molding process or same in FRP material process. •Rotational Molded Products : The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product or same in FRP material. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability. •Pipes: All metal pipes are Jindal/Zenith/Bhushan/Appolo/ Swastik or equivalent make for “C”class Heavy duty Hot Dipped Galvanized ISI mark GI Pipes. •Pipe Materials or Class: Medium Duty ('C' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Descriptions: • Product Area : 2.1 m Dia • Safe Play Area : 3.1 m Dia

Providing & Fixing STANDARD SEE SAW Technical Specification: •Frame: Frame of standard see-saw is designed using 15NB, 20NB & 25NB “C” Class G.I. pipe and it has been given radius by suitable bending techniques. Plates has been welded at places were seat has to be installed so that seats can be fixed to the frame with suitable bolting arrangement. •Roto / FRP Seat :Rotational molded seats /FRP seats of thickness 5 to 6mm are used in these see-saw , it has been provided with bolts to fix it too see-saw frame which has a plates of 200X150X5mm welded on to the frame. Handle has been provided on the frame made up of 20NB “C” Class pipe and also conforming to EN standards. The Standard See saw comprises two roto /FRP seats. • Roto product: The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect Blend of uniform thickness & durability. •See-saw stand : 50NB “C” Class Hot dip Galvanized Pipe of “C” Class Pipe length 550mm Plate 150X150X5mm is used as a foundation plate for the vertical pipe. •Standard See-saw Clamp: Standard see saw clamp is used in see saw so as to provide required motion for the see saw. •Bearing: The bearing used in this item is heavy duty nylon bush type. •Pipes: All metal pipes are Jindal/Zenith/Bhushan/Appolo/ Swastik or equivalent make for medium “C‘’ class Heavy duty Hot dipped galvanized ISI mark GI Pipes. •Pipe Materials or Class: Medium Duty (‘’C’’ Class) & Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Descriptions: • Product Area: 0.3 m x 2.5 mtr • Safe Play area : 1.3 m x 3.5 mtr

Providing & Fixing MULTI SEATER SEE SAW Technical Specification: •Handle grip: Hand Grip for requirement of hand grip. It is made from 20NB Galvanized pipe with end caps •See-saw lever: See Saw Lever made from 80NB Galvanized Pipe of 2950mm long with strong load carrying capacity •Seat: It is made from rotational molded material. It is 295x190x70mm Rotational molded seat with proper grip, shape & comfortable seatings. The same can be in FRP made also. •For Roto product: The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability. •See-saw stand: See Saw stand with special Nylon-6 bush enclosed in a seamless pipe hinged to 50NB Support pipe. The stand is fixed with ISA for strong foundation grip. •See Saw impact attenuator: It is made from 20NB Galvanized pipe •Bearing: The bearing used in this item is heavy duty nylon bush type •Pipes: All metal pipes are Jindal/Zenith/Bhushan/Appolo/ Swastik or equivalent make for “C” class Heavy duty Hot Dipped Galvanized ISI mark GI Pipes. •Pipe Materials or Class: Medium Duty ('C' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Powder coating: it shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Descriptions: • Product Area : 0.5 m x 3.0 mtr • Safe Play Area : 1.5 m x 4.0 mtr

Providing & Fixing DUST BIN (BIRD BIN) FRP Technical Specification: •Bird Bin: Bird bin is made up of Fiber reinforced plastic(FRP).This innovative bird dust-bin is designed for accommodating dry as well as wet kind of trash in the garden or public places. The bird dustbin has shape, size and parts that of a bird which looks like a real bird. And the trash can be put through inside the mouth of the bird. •FRP products: All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. International quality of Gel coats is used which is duly mixed with U.V stabilized pigment to give the required color to the product. Thickness of the FRP material varies from 5mm to 6mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test). Descriptions: • Height : 2.25’ • Dia.: 1.25’

Providing & Fixing DUST BIN (FROG BIN) FRP Technical Specification: •Frog Bin : Frog Bin is made up of Fiber reinforced plastic(FRP).This innovative frog dust-bin is designed for accommodating dry as well as wet kind of trash in the garden or public places. The frog dustbin has shape, size and parts that of a frog which looks like a real frog and the trash can be put through inside the mouth of the frog. •FRP products : All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. International quality of Gel coats is used which is duly mixed with U.V stabilized pigment to give the required color to the product. Thickness of the FRP material varies from 5 mm to 6 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test). Descriptions: • Height : 2.8’ • Dia.: 2.0’

Providing & Fixing MULTI ACTIVITY PLAY SYSTEM -1 Technical Specification: •Platform:-Material:- FRP (Fiber Reinforced Plastic) with anti-skid surface on top.Thickness:- Minimum thickness of 3-5 mm and side flanges of 6-8 mm thickness. Size:-Center to center distance 1160mm. Others:- Ribbed structure on bottom side. Shape:- Hexagonal •Brazing Frame:- ISA 25x25x5mm or ISA40x40x5mm thick and ISF 40x5mm thick which is galvanized and then duly Powder Coated. •Clamp: - Swings clamps made up of two parts are joined together with m6 allen bolts along with S-Hook & a specially designed, made from injection molded Nylon -6, plastic. •Vertical Pipes:-80NB GI pipes of Class ‘C’ heavy duty. Wall thickness as per the class of pipe used •FRP Spiral Slide:- The Spiral Slide & Slide Platform is made up of Fiber Reinforced Plastic (FRP) in one piece. Center Support pipe made from 80NB Galvanized pipe. Spiral slide railings consists of 20NB “C” Class hot dip galvanized pipe bended to form frame with two pairs of clamps joined together to GI Pipe with SS 304 graded non rusting nut-bolts, made from Nylon Grade-6 plastic. The ROTO molded plastic bush & roto molded slim railing are inserted into the pipe frame in alternate pattern. The railing frame is bolted to Spiral slide platform with 20NB GI support pipe bolted to platform at one end & clamped with special nylon clamps to railing pipe frame. • Slide Entry:- Slide Entry of the slide is made up of LLDPE (Linear Low Density Polyethylene) by Rotational molding process. It is attached to deck pipe with the help of 20NB GI pipes Class ‘C’ heavy duty and Injection Molded Nylon Clamps or same size in FRP. •Spiral Climber:- The spiral structure of the Spiral Climber is fabricated out of 25NB GI pipes Class ‘C’ heavy duty and supported vertical support pipes of 40NB Class ‘C’ heavy duty.The centre pole of the Spiral Climber is made up of 40NB GI pipe. It is attached to vertical deck pipes with the help of 20NB GI pipe & specially designed nylon clamps. •MAPS Double Swing:- In the double swing the leg support is made up of 40 NB GI pipes Class ‘C’ heavy duty and top pipe is of 50 NB GI pipes Class ‘C’ heavy duty with GI junction box with powder coating. The swing seats are made up of 10mm thick anti-skid chequered reinforced rubber top or FRP material. The rubber belt seat is suspended on 6mm rubber coated GI chain. The ball bearings are mounted inside especially designed nylon clamp FRP Hexagonal Canopy:- The Hexagonal canopy is made of FRP (Fiber Reinforced Plastic) with a minimum thickness of 2-3 mm. The canopy is assembled from six modules and at the top flag is fixed or one piece. • Flag:- This ROTO Flag is made up of rotational molding process which consists of LLDPE mixed with UV stabilized food grade material for making it UV resistant or FRP. •Cross Checkered Railing:- Railings are provided as barrier for safety purpose. Cross Checkered Railing is made up of LLDPE (Low-Density Polyethylene Plastic) in rotational molding process and has a support of 20 NB powder coated GI pipes. The railing is attached to the support pipe using an Injection Molded Nylon Clamps. •FRP Ladder 5ft:- Size:- 5ft Material:- FRP (Fiber Reinforced Plastic) with a minimum thickness of 4 to 6 mm. The top surface of the ladder is anti-skid to avoid slippery movements. There is also provision for Handrails on ladder for better grip. The ladder is supported by stand made up of 25NB G.I. pipe Class ‘C’ heavy duty and 50x10mm thick flat from the bottom. •Metal Roller Slide: In the roller slide the rollers are made up of LLDPE (Low Density Polyethylene) with UV stabilized pigment and having thickness of 4-5 mm. Rollers are mounted on 12 mm diameter rod and fixed in slide chute. The frame of the slide is made from 50x50x5 MS angle which is galvanized and then duly Powder Coated. Handrail is made up of 25 NB GI pipes. The landing support is made from 25 NB pipes. •FRP (FIBER REINFORCED PLASTIC):- All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required color to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test)." •LLDPE (LINEAR LOW DENSITY POLYETHYLENE):- The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform Thickness & durability. •Pipes: All metal pipes are Jindal/Zenith/Bhushan/Appolo/ Swastik or equivalent make “C” class Heavy Duty Hot Dipped Galvanized ISI mark GI Pipes of 60micron. •Pipe Materials or Class: Medium Duty ('C' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment.Platform Height - 5' ft from Ground Level. Descriptions: • Product Area : 7.0 m x 4.8 mtrs • Safe Play Area : 9.0 m x 6.8 mtrs

Providing & Fixing MULTI PLAY ACTIVITY SYSTEM -2 Technical Specification: • Platform:-Material:-FRP (Fiber Reinforced Plastic) with anti-skid surface on top. Thickness:- Minimum thickness of 4 to 6 mm and side flanges of 6-8 mm thickness Size:-Center to center distance 1160mm. Others:- Ribbed structure on bottom side Shape:- Hexagonal • Brazing Frame:- ISA 25x25x5mm or ISA40x40x5mm thick and ISF 40x5mm thick which is galvanized and then duly Powder Coated. • Clamp:-Made by Nylon 6 material by Injection Molding Process which is UV stabilized and having better strength to give support to other parts. • Vertical Pipes:-80NB GI pipes Class ‘C’ heavy duty. Wall thickness as per the class of pipe used • FRP Mini Tube Slide:- Mini Tube Slide is made from FRP slide modules and landing modules. The slide is supported with a ‘T’ support of 80 NB pipe Class ‘C’ heavy duty. The MS flange with GI plating is used for fixing ‘T’ support. • FRP Spiral Slide:- The Spiral Slide & Slide Platform is made up of Fiber Reinforced Plastic (FRP) in one piece. Center Support pipe made from 80NB Galvanized pipe welded to 100NB Galvanized pipe of Class ‘C’ heavy duty. Spiral slide railings consists of 20NB hot dip galvanized pipe bended to form frame with two pairs of clamps joined together to GI Pipe with SS 304 graded non rusting nut bolts, made from Nylon Grade-6 plastic. The Roto molded plastic bush & Roto molded slim railing are inserted into the pipe frame in alternate pattern. The railing frame is bolted to Spiral slide platform with 20NB GI support pipe bolted to platform at one end & clamped with special nylon clamps to railing pipe frame. • FRP Wave Slide:- Wave Slide chute is made up of FRP. The chute has its end such as it causes safe landing of the child. The landing portion is horizontal with respect to the ground. The landing of the slide is supported by stand made up of 25NB pipe and 5mm thick MS plate with GI plating. • FRP Bowl Slide:- Bowl Slide chute is made up of FRP. The chute has its end such as it causes safe landing of the child. The landing of the slide is supported by stand made up of 25NB pipe of Class ‘C’ heavy duty. • Slide Entry:- Slide Entry of the slide is made up of LLDPE (Linear Low Density Polyethylene) by Rotational molding process. It is attached to deck pipe with the help of 20NB GI pipes and Injection Molded Nylon Clamps or same in FRP material. • Swinging Bridge:- Size:- 2400mm Material:- Frame - 80NB GI pipes of Class ‘C’ heavy duty 2384 mm long and GI plated MS angles of 75x75x5mm 1020mm. Planks - Low-Density Polyethylene Plastic in rotational molding process. ROTO Planks in same or different colors are suspended with the help of 12mm galvanized chains & specially designed clamps made up of 16SWG M.S. sheet. These chains are mounted on ‘U’ hooks. 12mm dia. U Hooks are welded on the inner side of the M.S. angles and other side of the U hook is grinded. • Bridge Railing:- Railings are provided on both sides of bridge as barrier for safety purpose. It is made up of LLDPE (Low-Density Polyethylene Plastic) in rotational molding process and has a support of 20 NB powder coated GI pipes. The railing is attached to the support pipe using an Injection Molded Nylon Clamps.• FRP Staircase with Railing:-Material:- FRP (Fiber Reinforced Plastic) with a minimum thickness of 3-5mm or 16SWG Meta The staircase has sufficient reinforcement to maintain strength and to avoid bending. The top surface of the ladder should be such that it should not deserve any kind of skiddy movement. Railings of 25NB GI pipes are provided for safety purpose. • FRP Split Level Ladder:- Material:- FRP ( Fiber Reinforced Plastic) with a minimum thickness of 3-5mm. The top surface of the ladder is anti-skid to avoid slippery movements. The Ladder is directly bolted to platform and is supported by 50x5 MS flat with GI plating. • FRP Rock Climber:- Central pad of ROCK Climber is made up of FRP (Fiber Reinforced Plastic). The rocks are mounted on platform and it has gradient from the ground. The ladder is supported by stand made up of 25NB G.I. pipe and 50x10mm thick flat from the bottom. • Spiral Climber:- The spiral structure of the Spiral Climber is fabricated out of 25NB GI pipes and supported vertical support pipes of 40NB.The centre pole of the Spiral Climber is made up of 40NB GI pipe. It is attached to vertical deck pipes with the help of 20NB GI pipe & specially designed nylon clamps. • Vertical Loop Climber:- The loops of the Vertical Loop Climber is fabricated out of 25NB GI pipes and supported vertical support pipes of 40NB.The centre pole of the Spiral Climber is made up of 40NB GI pipe. It is attached to vertical deck pipes with the help of 20NB GI pipe & specially designed nylon clamps. • Wave Net Climber 3ft:- The MAPS Wave Net climber is made from 18mm dia nylon rope. These ropes are supported with 40 NB GI pipe & 50x10mm thk flat with 12 mm dia ‘u’ hooks. • Cross N Zero Railing:- This item provides brain washing experience to the children and enhances their tactical strength by providing them a intelligent game. The prisms for the “X” and “O” and also the frame of this item are made up of LLDPE (Low-Density Polyethylene Plastic) in rotational molding process or same in FRP material. The prisms are fixed on powder coated GI pipe frame of 20 NB and 15 NB pipes of Class ‘C’ heavy duty. • FRP Hexagonal Canopy:- The Hexagonal canopy is made of FRP (Fiber Reinforced Plastic) with a minimum thickness of 2-3 mm. The canopy is assembled from six modules and at the top flag is fixed. • Flag:- This ROTO Flag is made up of rotational molding process which consists of LLDPE mixed with UV stabilized food grade material for making it UV resistant. • FRP (FIBER REINFORCED PLASTIC):- All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required color to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test)." • LLDPE (LINEAR LOW DENSITY POLYETHYLENE):- The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability.

Shree Icchamani Enterprises

Shri Sai Industries

Guineas Sports

Ganesh Fabrication Works