Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.4 LAdmitted-Finance BELOW SLAUGHTER HOUSE KRISHNA NAGER SHIMLA | SHIMLA | SHIMLA | HIMACHAL PRADESH | L1 | Admitted-Finance | |
| 2 | L2₹4.6 L+₹17,498.50 (3.95%)Admitted-Finance R O SUJANPUR TEHSIL DISTT HAMRIPUR | L2 | Admitted-Finance | |
| 3 | L3₹4.8 L+₹32,638.50 (7.37%)Admitted-Finance HIMACHAL PRADESH HP | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | RAJE ENGINNERING WORKS L2 | Sunil Kumar L1 | ROHIT KUMAR L3 |
|---|---|---|---|---|---|---|
| 1.00 | Dismentalling of old GMS pipe of 250mm dia including cutting etc complete(earth work to be measured and paid for separately including testing of joints, within all leads and lifts as per the entire satisfaction of the Engineer-in-charge | 150 | Rmt | 480 ₹72,000 | 450 ₹67,500 Lowest | 510 ₹76,500 |
| 2.00 | Relaying, jointing with circumfrential butt welded joints by electrical arc welding (welding thickness shall be equal to pipe wall thickness) and testing of MSERW pipe of following dia meters confirming to BIS 3183-2007, (latest with upto date amendments) having wall thickness as specified below and capable of withstanding required test pressure in a random length of 5.5 to 6.5 meters, including manufacturing reducers/ tapers , all short pieces, etc. as per site requirement made from parent tubes . The laying of pipe shall also include flanged joints duly welded in three layers (two inner one outer), where ever required as per the directions of the Enginer-in-charge ( Earth work in trenches and the cost of providing flanges i/c nuts & bolts & gasket will be measured and paid for seperately) and all operations such as cutting, welding, jointing, fabrication of tees i.e. lowering & laying in excavated Trenches to ensure required level i/c flushing, cleaning and hydraulic testing complete in all respects to the satisfaction of the Engineer in charge. The pipes shall be factory galvanized (zinc coating both inside and outside) as per relevant IS standards and the damaged portion of the pipes and specials ( if damaged during laying jointing operation of pipe) made form the parent tube , shall be provided anticorrosive treatment by applying two coats of anticorrosive bituminous paint over a priming coat as per AWWA specifications C-203-1978. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing , DP test of butt welded joints complete in all respect and to the best satisfaction & direction of Engineer in charge with in all leads and lifts. Note:- Negetive Tolerance should not be more than +/- 3%. 250mm dia L-290 | 150 | Rmt | 580 ₹87,000 | 560.73 ₹84,109.5 Lowest | 590 ₹88,500 |
| 3.00Manufacturing of GI Bends made of Various dia GI. Pipes as per IS:1239-1990 (Part-I) with latest with upto date ammendements by butt weld joints complete of all degrees of relevent requirement with 3 - 4 cuts of radius not less than 4.80 times dia (Bends of all Degrees) including anti corrosive treatment with table- 17 flanges complete in all leads and lifts to the entire satisfaction of Engineer-in-Charge. | ||||||
| 4.00 | 250 mm dia | 5 | Nos | 9,600 ₹48,000 | 9,500 ₹47,500 Lowest | 9,800 ₹49,000 |
| 5.00 | 150 mm dia | 4 | Nos | 6,250 ₹25,000 | 6,000 ₹24,000 Lowest | 6,400 ₹25,600 |
| 6.00 | Providing Circumferencial Butt Welded joints by electrical arc welding to follwing dia. GMS Pipe as per IS:1239-2004 (Part - I) , welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS : 816-1969 specifications,by using welding electrodes of 2.50 mm to 6.30 mm of Advani Oerlikon (Adore) - CITOJET / ESAB make, conforming to IS:814-1991, at site of work complete in all respects, including manual / mechanical handling of pipes in all leads and lifts and Die Penetration test to the entire satisfaction of Engineer-in-Charge. (1) 250 mm dia | 25 | Nos | 2,250 ₹56,250 | 2,114 ₹52,850 Lowest | 2,380 ₹59,500 |
| 7.00 | Providing and welding of MS flanges at required joint, conforming to 150 mm dia table-17 as per IS 6392-1971 (Last upto date ammendmendments ) with plan and G.I pipe in requiste number of layers on both faces to make the joint leak proof ( The cost of providing and laying of GI pipes to be measured and paid for seperately). The welding of flanges should coform to IS 816-1969 with electrodes as per IS:814-1991 and required number of nuts and bolts conforming to IS 1364 including cost of gas cut sheet nuts and bolts. The thickness of gasket sheet not less tha 3.00 mm conforming to IS 2712-1998. The work shall be done to the entire satisfaction of Engineer in charge with in all leads aand lifts. | 3 | Pair | 5,000 ₹15,000 | 4,800 ₹14,400 Lowest | 5,230 ₹15,690 |
| 8.00 | KIRLOSKAR Cast Iron Rising Spindle Sluice Valve Flanged End As Per IS :14846 Body, Cover- CI IS:210, Gr.FG260 Door- CI IS:210, Gr. FG260 Body Ring-Bronze IS:318 Gr. LTB2 Door Face- Natural Rubber Hinge Pin-SS ASTM A276 Type 410 Fasteners-CS IS:1367, CL-4.6/4.0 Gasket- Natural Rubber Flange Drilling - IS:1538, Table 4 & 6n (1) 150 mm dia | 2 | Nos | 78,500 ₹1,57,000 | 76,196 ₹1,52,392 Lowest | 80,300 ₹1,60,600 |
Tender Value
₹3.6 L
EMD Value
₹7,882
Closing Date
6 Nov 2025, 11:00 amClosed
Executive Engineer
JSV Division Nadaun
Restoration of rain damage of LWSS WTP nadaun in Tehsil Nadaun Distt Hamirpur HP
2025_HPIPH_119123_1
JSV-EE-NDN-CB-Tender/2025-26/-
Open Tender
Civil Works
Item Rate
90 days
Nadaun Area
Dismentalling relaying repair og 250 mm dia pipe line and providing and fixing of sluice valve
8 documents required · 8 mandatory
₹500
EE Nadaun
₹7,882
17 Jan 2026
29 Oct 2025
6 Nov 2025
29 Oct 2025
6 Nov 2025
29 Oct 2025
29 Oct 2025 - 6 Nov 2025
Amount
Dismentalling of old GMS pipe of 250mm dia including cutting etc complete(earth work to be measured and paid for separately including testing of joints, within all leads and lifts as per the entire satisfaction of the Engineer-in-charge
Relaying, jointing with circumfrential butt welded joints by electrical arc welding (welding thickness shall be equal to pipe wall thickness) and testing of MSERW pipe of following dia meters confirming to BIS 3183-2007, (latest with upto date amendments) having wall thickness as specified below and capable of withstanding required test pressure in a random length of 5.5 to 6.5 meters, including manufacturing reducers/ tapers , all short pieces, etc. as per site requirement made from parent tubes . The laying of pipe shall also include flanged joints duly welded in three layers (two inner one outer), where ever required as per the directions of the Enginer-in-charge ( Earth work in trenches and the cost of providing flanges i/c nuts & bolts & gasket will be measured and paid for seperately) and all operations such as cutting, welding, jointing, fabrication of tees i.e. lowering & laying in excavated Trenches to ensure required level i/c flushing, cleaning and hydraulic testing complete in all respects to the satisfaction of the Engineer in charge. The pipes shall be factory galvanized (zinc coating both inside and outside) as per relevant IS standards and the damaged portion of the pipes and specials ( if damaged during laying jointing operation of pipe) made form the parent tube , shall be provided anticorrosive treatment by applying two coats of anticorrosive bituminous paint over a priming coat as per AWWA specifications C-203-1978. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing , DP test of butt welded joints complete in all respect and to the best satisfaction & direction of Engineer in charge with in all leads and lifts. Note:- Negetive Tolerance should not be more than +/- 3%. 250mm dia L-290
Manufacturing of GI Bends made of Various dia GI. Pipes as per IS:1239-1990 (Part-I) with latest with upto date ammendements by butt weld joints complete of all degrees of relevent requirement with 3 - 4 cuts of radius not less than 4.80 times dia (Bends of all Degrees) including anti corrosive treatment with table- 17 flanges complete in all leads and lifts to the entire satisfaction of Engineer-in-Charge.
250 mm dia
150 mm dia
Providing Circumferencial Butt Welded joints by electrical arc welding to follwing dia. GMS Pipe as per IS:1239-2004 (Part - I) , welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS : 816-1969 specifications,by using welding electrodes of 2.50 mm to 6.30 mm of Advani Oerlikon (Adore) - CITOJET / ESAB make, conforming to IS:814-1991, at site of work complete in all respects, including manual / mechanical handling of pipes in all leads and lifts and Die Penetration test to the entire satisfaction of Engineer-in-Charge. (1) 250 mm dia
Providing and welding of MS flanges at required joint, conforming to 150 mm dia table-17 as per IS 6392-1971 (Last upto date ammendmendments ) with plan and G.I pipe in requiste number of layers on both faces to make the joint leak proof ( The cost of providing and laying of GI pipes to be measured and paid for seperately). The welding of flanges should coform to IS 816-1969 with electrodes as per IS:814-1991 and required number of nuts and bolts conforming to IS 1364 including cost of gas cut sheet nuts and bolts. The thickness of gasket sheet not less tha 3.00 mm conforming to IS 2712-1998. The work shall be done to the entire satisfaction of Engineer in charge with in all leads aand lifts.
KIRLOSKAR Cast Iron Rising Spindle Sluice Valve Flanged End As Per IS :14846 Body, Cover- CI IS:210, Gr.FG260 Door- CI IS:210, Gr. FG260 Body Ring-Bronze IS:318 Gr. LTB2 Door Face- Natural Rubber Hinge Pin-SS ASTM A276 Type 410 Fasteners-CS IS:1367, CL-4.6/4.0 Gasket- Natural Rubber Flange Drilling - IS:1538, Table 4 & 6n (1) 150 mm dia
RAJE ENGINNERING WORKS (BID ID -576615)
ROHIT KUMAR (BID ID -576552)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.30 MB
form6.pdf
Tender Documents • 0.18 MB
Form8.pdf
Tender Documents • 1.43 MB
terms.pdf
Tender Documents • 0.06 MB
BOQ_174369.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .