Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹10.9 CrAccepted-AOC | ₹10.9 Cr | L-1 | Accepted-AOC L-1 Bidder |
| 2 | L-2₹11.4 CrRejected-Finance | ₹11.4 Cr | L-2 | Rejected-Finance Not Validated. (Other than L-1) |
| 3 | L-3₹13.2 CrRejected-Finance | ₹13.2 Cr | L-3 | Rejected-Finance Not Validated. (Other than L-1) |
| 4 | L-4₹13.5 CrRejected-Finance | ₹13.5 Cr | L-4 | Rejected-Finance Not Validated. (Other than L-1) |
| 5 | L-5₹13.6 CrRejected-Finance | ₹13.6 Cr | L-5 | Rejected-Finance Not Validated. (Other than L-1) |
Tender Value
₹12.6 Cr
EMD Value
₹9.6 L
Closing Date
27 Jul 2022, 6:00 pmClosed
HQ CE SILIGURI ZONE
HQ CE SILIGURI ZONE, MES, SEVOKE ROAD, PO SALUGARA, DIST JALPAIGURI, PIN 734008 (WB)
PROVN OF TECHNICAL INFRASTRUCTURES (USING LGSF TECHNOLOGY) UNDER GE (SOUTH) BINNAGURI
2022_MES_530354_1
98752/BIN(S)/SZ/E8 (CA No.CESZ/BIN(S)/05 OF 22-23)
Open Tender
Construction Works
270 days
BINNAGURI
Please refer Tender documents.
6 documents required · 6 mandatory
₹3,000
GE (S) BINNAGURI
₹9.6 L
Yes
HQ CE SILIGURI ZONE
24 Aug 2022
11 Jun 2022
29 Jul 2022
11 Jun 2022
27 Jul 2022
13 Jul 2022
11 Jun 2022 - 20 Jun 2022
21 Jun 2022
Amount
BUILDINGS & INFRASTRUCTURE WORKS (SCH 'A' PART-I)
Design, fabricate, supply, errect, construct and execute Gun Shed building / structure adopting and incorporating LGSF (Light Gauge Steel Frame) Structure Technology based on drawing & design to be submitted by the contractor duly vetted by IITs & approved by the department including all fittings & fixtures complete all as specified and shown on Drawing. NOTE :- (a) Construction and execution of flooring and floor finishes (above filled earth) of Gun Shed (excluding Store Cum Office and Toilet) and Appron / hardstanding are outside the scope of above item. However, design of floor and floor finish of Gun Shed (except store cum office & toilet) and Appron as per requirement given in the tender duly vetted by IITs is within the scope of above item. Earth filling under floor upto the requirement from NGL with proper compaction is within the scope of above item. (b) Floor and floor finish of Gun Shed & Appron only shall be contructed, executed, measured and paid seperately under "Provisional Lump Sum". (c ) Construction and execution of floor and floor finish of Store cum office and Toilet are within the scope of above item.
INTERNAL ELECTRIFICATION (SCH 'A' PART-II)
Lump sum price worked out by the Contractor for “(INTERNAL ELECTRIFICATION)” as listed in Schedule ‘A’ Part-II. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 11,90,639.04 inserted by the MES in Schedule ‘A’ Part-II.
INTERNAL WATER SUPPLY (SCH 'A' PART-III)
Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part-III. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 35,229.72 inserted by the MES in Schedule ‘A’ Part-III.
LIGHTNING PROTECTION (SCH 'A' PART-IV)
Lump sum price worked out by the Contractor for “(LIGHTNING PROTECTION)” as listed in Schedule ‘A’ Part-IV. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 3,82,033.00 inserted by the MES in Schedule ‘A’ Part-IV.
FIRE ALARM SYSTEM AND FIRE FIGHTING (SCH 'A' PART-V)
Lump sum price worked out by the Contractor for “(FIRE ALARM SYSTEM AND FIRE FIGHTING)” as listed in Schedule ‘A’ Part-V. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 13,07,933.20 inserted by the MES in Schedule ‘A’ Part-V.
MISCELLANEOUS ITEMS REQUIRED FOR B/R & E/M SERVICES (Sch 'A' Part-VI)
INTERNAL ELECTRIFICATION S&F LED High bay light 70 Watt, IP65 protection with PDC housingsuitable for ceiling mountand in wide beam optics, system efficacy 125 lm/W to 130 lm/W complete all as specified and as directed. MAKE : Havells cat Part No-ILIOSBAYPLUSHBP70WLED857SP90DTOPC / equivalent Cat Part of Bajaj / Phillips / Crompton.
S&F air circulator wall mounted fan 600 mm sweep, 1400 RPM,150 CMH air delivery ,100 Watt, complete with aerodynamically designed metallic blades fan head, wall bracket, mounting accessories kit complete all as specified and as directed. MAKE : Usha / Havells / Bajaj.
M&L Sub main wiring surface type with Four run single core cable PVC insulated cable with 6.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde including earth continuity conductor using PVC insulated cable of stranded copper conductor of size 6.0 Sqmm connected to common earth dolly and drawing into steel conduits of 25 mm dia medium grade size complete all as specfied and directed. NOTE : Four run of submain wiring cable alongwith one run of earth wire shall be measured as an unit.
M & L Sub main wiring surface type with three run single core cable PVC insulated cable with 4.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde including earth continuity conductor using PVC insulated cable of stranded copper conductor of size 4.0 Sqmm connected to common earth dolly and drawing into steel conduits of 25 mm dia medium grade size complete all as specified and directed. NOTE : Three run of submain wiring cable alongwith one run of earth wire shall be measured as an unit.
S&F of Cable junction box 130x130x77 mm with terminals for 2-6 sq mm 4 core cable with 4 way entry for electric shutter cable complete all as specified and directed.
M&L for LED lamp box of size 900 x 300 x 30 mm with LED lamps by making drawing with computer art work for alphabets/ digits/ symbols etc in approved coloured laser cut LED lamp box made out of three layers of acrylic sheet 3 mm thick with laser cut as per approved matter drawing with computer art work sandwiched with one transparent sheet , one coloured sheet of approved colour and one white sheet at top including 12 volt LED strip light of suitable length to fit into the LED lamp box duly connected complete all as specified and as directed.
Supply and installation of Glow sign post of size 1.30 x 0.80 x 0.20 Mtr, made out of PVC white perpex sheet 3 mm thick fixed on aluminium angle iron structure of suitable size duly paste the 'matter' with self adhesive Vinyl coloured sticker as per the requirement for outdoor equipped with LED Tubelight 1x 18 Watts-03 Nos prewired with 1.5 sqmm copper S/C stranded conductor of 3 RM length and proper fixing/ hanging arrangements on GI pipe 40 mm dia light grade structure with extruded leg 1.5 Mtr long including PCC (1:3:4) foundation complete all as specified and as directed.
LIGHTNING PROTECTION Fabrication and instalation of cubical shape enclosure made of MS/CRCA sheet 2.00mm thick with front detachable cover, anodixed fiexing screw cap, washers 4 Nos to be mounted on wall with wooden plugs & screws 4 Nos duly painted inside and outside by two coats of aluminium paints over a coat of redoxide primer overall dimension of enclosure 150mm x 150 mm x 100 mm (depth) for fixing inside test point terminal block complete all as specified and directed.
FIRE ALARM SYSTEM AND FIRE FIGHTING S&F of Fire Extinguisher Water CO2/stored Pressure type, 9 KG capacity complete all as specified and directed.
S&F of Fire Extinguisher Water CO2/stored Pressure type, 6.5 KG capacity complete all as specified and directed.
S&F of Fire Extinguisher Dry Chemical Powder(ABC) type,6.5 Kg Capacity complete all as specified and directed.
Supply only Fire Beater complete all as specified and directed.
S&F of Fire Bucket(Water/Sand) set of two with stand complete all as specified and directed.
Supply only Fire hook complete all as specified and directed.
M&L for construction of fire point structure complete for housing of fire bucket of two set, fire extinguishers, Fire beater etc complete all as specified and directed.
S&F of electric motor siren confirming to IS :1941 suitable for three phases 415 volt 50 Hz supply with motor not exceeding 3.75 KW power and able to delivered 143 DB noise level minimum reduce for 2.5 KM complete including all relevant accessories required for fixing and operation complete all as specified and directed.
S&F of fire extinguisher Mechanical Foam (AFFF) type, 9 ltrs capacity complete all as specifed and directed.
Sub total
PROVISIONAL LUMP SUM
Construction and execution of floor and floor finish (above filled earth) of Gun Shed and Appron / Hardstanding complete all as specified and as directed. TOTAL AMOUNT = ₹ 3,40,00,000.00 Add/deduct__________% (___________percent) ₹____________ Above/below Total cost is at par SSR-2020 rate, Bidder to quote total amount after considering percentage addition/deduction thereto to cover market variation, over head and profit etc.
Construction of Staging of Service Water Tank using mild steel frame structure complete all as specified and as directed. TOTAL AMOUNT = ₹ 1,65,000.00 Add/deduct__________% (___________percent) ₹____________ Above/below Total cost is at par SSR-2020 rate, Bidder to quote total amount after considering percentage addition/deduction thereto to cover market variation, over head and profit etc.
NOTE FOR SRL ITEM No. 7.01 & 7.02 Payment of work done shall be made as per applicable rate in SSR-2020 (Part-II) duly adjusted with the percentage quoted / derived under Provisional Lump Sum. If unit rate of any item is not available in SSR-2020 (Part-II) payment shall be made as per actual rate in terms of Condition 62(G) of IAFW-2249.
NIPANI INFRA AND INDUSTRIES PRIVATE LIMITED
M/s NLM INFRA PROJECTS
HTE INFRA LLP
B D Raizada Projects Pvt Ltd
M/S N C BANERJEE AND SON
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid